This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[PATCH 3/4 v2] Create nat/i386-dregs.c
- From: Gary Benson <gbenson at redhat dot com>
- To: gdb-patches at sourceware dot org
- Date: Wed, 18 Jun 2014 16:22:55 +0100
- Subject: [PATCH 3/4 v2] Create nat/i386-dregs.c
- Authentication-results: sourceware.org; auth=none
- References: <1403104976-2492-1-git-send-email-gbenson at redhat dot com>
This commit moves code to be shared from i386-{nat,low}.[ch]
into a new file, nat/i386-dregs.c.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* nat/i386-dregs.c: New file.
* Makefile.in (i386-dregs.o): New rule.
* config/i386/cygwin.mh (NATDEPFILES): Add i386-dregs.o.
* config/i386/cygwin64.mh (NATDEPFILES): Likewise.
* config/i386/darwin.mh (NATDEPFILES): Likewise.
* config/i386/fbsd.mh (NATDEPFILES): Likewise.
* config/i386/fbsd64.mh (NATDEPFILES): Likewise.
* config/i386/go32.mh (NATDEPFILES): Likewise.
* config/i386/linux.mh (NATDEPFILES): Likewise.
* config/i386/linux64.mh (NATDEPFILES): Likewise.
* config/i386/mingw.mh (NATDEPFILES): Likewise.
* config/i386/mingw64.mh (NATDEPFILES): Likewise.
* i386-nat.h (debug_hw_points): New declaration.
* i386-nat.c (breakpoint.h): Remove include.
(command.h): Likewise.
(target.h): Likewise.
(gdb_assert.h): Likewise.
(debug_hw_points): Made nonstatic.
(debug_printf): Now in i386-dregs.c.
(TARGET_HAS_DR_LEN_8): Likewise.
(DR_CONTROL_SHIFT): Likewise.
(DR_CONTROL_SIZE): Likewise.
(DR_RW_EXECUTE): Likewise.
(DR_RW_WRITE): Likewise.
(DR_RW_READ): Likewise.
(DR_RW_IORW): Likewise.
(DR_LEN_1): Likewise.
(DR_LEN_2): Likewise.
(DR_LEN_4): Likewise.
(DR_LEN_8): Likewise.
(DR_LOCAL_ENABLE_SHIFT): Likewise.
(DR_GLOBAL_ENABLE_SHIFT): Likewise.
(DR_ENABLE_SIZE): Likewise.
(DR_LOCAL_SLOWDOWN): Likewise.
(DR_GLOBAL_SLOWDOWN): Likewise.
(DR_CONTROL_RESERVED): Likewise.
(I386_DR_CONTROL_MASK): Likewise.
(I386_DR_VACANT): Likewise.
(I386_DR_LOCAL_ENABLE): Likewise.
(I386_DR_GLOBAL_ENABLE): Likewise.
(I386_DR_DISABLE): Likewise.
(I386_DR_SET_RW_LEN): Likewise.
(I386_DR_GET_RW_LEN): Likewise.
(I386_DR_WATCH_HIT): Likewise.
(i386_wp_op_t): Likewise.
(i386_show_dr): Likewise.
(i386_length_and_rw_bits): Likewise.
(i386_insert_aligned_watchpoint): Likewise.
(i386_remove_aligned_watchpoint): Likewise.
(i386_handle_nonaligned_watchpoint): Likewise.
(i386_update_inferior_debug_regs): Likewise.
(i386_insert_watchpoint): Use i386_dr_insert_watchpoint.
(i386_remove_watchpoint): Use i386_dr_remove_watchpoint.
(i386_region_ok_for_watchpoint):
Use i386_dr_region_ok_for_watchpoint.
(i386_stopped_data_address): Use i386_dr_stopped_data_address.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* Makefile.in (i386-dregs.o): New rule.
* configure.srv: Add i386-dregs.o to all targets using i386-low.o.
* i386-low.c (target.h): Remove include.
(TARGET_HAS_DR_LEN_8): Now in i386-dregs.c.
(DR_CONTROL_SHIFT): Likewise.
(DR_CONTROL_SIZE): Likewise.
(DR_RW_EXECUTE): Likewise.
(DR_RW_WRITE): Likewise.
(DR_RW_READ): Likewise.
(DR_RW_IORW): Likewise.
(DR_LEN_1): Likewise.
(DR_LEN_2): Likewise.
(DR_LEN_4): Likewise.
(DR_LEN_8): Likewise.
(DR_LOCAL_ENABLE_SHIFT): Likewise.
(DR_GLOBAL_ENABLE_SHIFT): Likewise.
(DR_ENABLE_SIZE): Likewise.
(DR_LOCAL_SLOWDOWN): Likewise.
(DR_GLOBAL_SLOWDOWN): Likewise.
(DR_CONTROL_RESERVED): Likewise.
(I386_DR_CONTROL_MASK): Likewise.
(I386_DR_VACANT): Likewise.
(I386_DR_LOCAL_ENABLE): Likewise.
(I386_DR_GLOBAL_ENABLE): Likewise.
(I386_DR_DISABLE): Likewise.
(I386_DR_SET_RW_LEN): Likewise.
(I386_DR_GET_RW_LEN): Likewise.
(I386_DR_WATCH_HIT): Likewise.
(i386_wp_op_t): Likewise.
(i386_show_dr): Likewise.
(i386_length_and_rw_bits): Likewise.
(i386_insert_aligned_watchpoint): Likewise.
(i386_remove_aligned_watchpoint): Likewise.
(i386_handle_nonaligned_watchpoint): Likewise.
i386_update_inferior_debug_regs(): Likewise.
(i386_dr_insert_watchpoint): Likewise.
(i386_dr_remove_watchpoint): Likewise.
(i386_dr_region_ok_for_watchpoint): Likewise.
(i386_dr_stopped_data_address): Likewise.
(i386_dr_stopped_by_watchpoint): Likewise.
---
gdb/ChangeLog | 59 ++++
gdb/Makefile.in | 4 +
gdb/config/i386/cygwin.mh | 4 +-
gdb/config/i386/cygwin64.mh | 2 +-
gdb/config/i386/darwin.mh | 2 +-
gdb/config/i386/fbsd.mh | 2 +-
gdb/config/i386/fbsd64.mh | 2 +-
gdb/config/i386/go32.mh | 2 +-
gdb/config/i386/linux.mh | 2 +-
gdb/config/i386/linux64.mh | 2 +-
gdb/config/i386/mingw.mh | 2 +-
gdb/config/i386/mingw64.mh | 2 +-
gdb/gdbserver/ChangeLog | 43 +++
gdb/gdbserver/Makefile.in | 4 +
gdb/gdbserver/configure.srv | 14 +-
gdb/gdbserver/i386-low.c | 587 ----------------------------------------
gdb/i386-nat.c | 534 +-------------------------------------
gdb/i386-nat.h | 3 +
gdb/nat/i386-dregs.c | 617 +++++++++++++++++++++++++++++++++++++++++++
19 files changed, 753 insertions(+), 1134 deletions(-)
create mode 100644 gdb/nat/i386-dregs.c
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index d17774a..f4dd406 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -2178,6 +2178,10 @@ waitstatus.o: ${srcdir}/target/waitstatus.c
# Need to explicitly specify the compile rule as make will do nothing
# or try to compile the object file into the sub-directory.
+i386-dregs.o: ${srcdir}/nat/i386-dregs.c
+ $(COMPILE) $(srcdir)/nat/i386-dregs.c
+ $(POSTCOMPILE)
+
linux-waitpid.o: ${srcdir}/nat/linux-waitpid.c
$(COMPILE) $(srcdir)/nat/linux-waitpid.c
$(POSTCOMPILE)
diff --git a/gdb/config/i386/cygwin.mh b/gdb/config/i386/cygwin.mh
index b704158..8ab439b 100644
--- a/gdb/config/i386/cygwin.mh
+++ b/gdb/config/i386/cygwin.mh
@@ -1,3 +1,3 @@
-MH_CFLAGS=
-NATDEPFILES= i386-nat.o windows-nat.o i386-windows-nat.o
+'MH_CFLAGS=
+NATDEPFILES= i386-nat.o i386-dregs.o windows-nat.o i386-windows-nat.o
XM_CLIBS=
diff --git a/gdb/config/i386/cygwin64.mh b/gdb/config/i386/cygwin64.mh
index 1c21fc6..5ce3095 100644
--- a/gdb/config/i386/cygwin64.mh
+++ b/gdb/config/i386/cygwin64.mh
@@ -17,4 +17,4 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>. */
-NATDEPFILES= i386-nat.o windows-nat.o amd64-windows-nat.o
+NATDEPFILES= i386-nat.o i386-dregs.o windows-nat.o amd64-windows-nat.o
diff --git a/gdb/config/i386/darwin.mh b/gdb/config/i386/darwin.mh
index 190d56c..bd4d57e 100644
--- a/gdb/config/i386/darwin.mh
+++ b/gdb/config/i386/darwin.mh
@@ -1,4 +1,4 @@
# Host: IA86 running Darwin
NATDEPFILES = fork-child.o darwin-nat.o \
- i386-darwin-nat.o i386-nat.o amd64-nat.o darwin-nat-info.o
+ i386-darwin-nat.o i386-nat.o i386-dregs.o amd64-nat.o darwin-nat-info.o
diff --git a/gdb/config/i386/fbsd.mh b/gdb/config/i386/fbsd.mh
index 2c9cd9a..7aa6a69 100644
--- a/gdb/config/i386/fbsd.mh
+++ b/gdb/config/i386/fbsd.mh
@@ -1,6 +1,6 @@
# Host: FreeBSD/i386
NATDEPFILES= fork-child.o inf-ptrace.o \
- fbsd-nat.o i386-nat.o i386bsd-nat.o i386fbsd-nat.o \
+ fbsd-nat.o i386-nat.o i386-dregs.o i386bsd-nat.o i386fbsd-nat.o \
bsd-kvm.o
NAT_FILE= nm-fbsd.h
HAVE_NATIVE_GCORE_HOST = 1
diff --git a/gdb/config/i386/fbsd64.mh b/gdb/config/i386/fbsd64.mh
index c719a17..c37f460 100644
--- a/gdb/config/i386/fbsd64.mh
+++ b/gdb/config/i386/fbsd64.mh
@@ -1,7 +1,7 @@
# Host: FreeBSD/amd64
NATDEPFILES= fork-child.o inf-ptrace.o \
fbsd-nat.o amd64-nat.o amd64bsd-nat.o amd64fbsd-nat.o \
- bsd-kvm.o i386-nat.o
+ bsd-kvm.o i386-nat.o i386-dregs.o
HAVE_NATIVE_GCORE_HOST = 1
LOADLIBES= -lkvm
diff --git a/gdb/config/i386/go32.mh b/gdb/config/i386/go32.mh
index 9cebf01..1b8ce86 100644
--- a/gdb/config/i386/go32.mh
+++ b/gdb/config/i386/go32.mh
@@ -3,7 +3,7 @@
# We include several header files from config/djgpp
MH_CFLAGS= -I$(srcdir)/config/djgpp
-NATDEPFILES= go32-nat.o i386-nat.o
+NATDEPFILES= go32-nat.o i386-nat.o i386-dregs.o
HOST_IPC=
CC= gcc
diff --git a/gdb/config/i386/linux.mh b/gdb/config/i386/linux.mh
index 10a2584..be18dcf 100644
--- a/gdb/config/i386/linux.mh
+++ b/gdb/config/i386/linux.mh
@@ -2,7 +2,7 @@
NAT_FILE= config/nm-linux.h
NATDEPFILES= inf-ptrace.o fork-child.o \
- i386-nat.o i386-linux-nat.o \
+ i386-nat.o i386-dregs.o i386-linux-nat.o \
proc-service.o linux-thread-db.o \
linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
linux-btrace.o linux-waitpid.o
diff --git a/gdb/config/i386/linux64.mh b/gdb/config/i386/linux64.mh
index 686c363..3126b75 100644
--- a/gdb/config/i386/linux64.mh
+++ b/gdb/config/i386/linux64.mh
@@ -1,6 +1,6 @@
# Host: GNU/Linux x86-64
NATDEPFILES= inf-ptrace.o fork-child.o \
- i386-nat.o amd64-nat.o amd64-linux-nat.o \
+ i386-nat.o i386-dregs.o amd64-nat.o amd64-linux-nat.o \
linux-nat.o linux-osdata.o \
proc-service.o linux-thread-db.o linux-fork.o \
linux-procfs.o linux-ptrace.o linux-btrace.o \
diff --git a/gdb/config/i386/mingw.mh b/gdb/config/i386/mingw.mh
index b704158..07f06f2 100644
--- a/gdb/config/i386/mingw.mh
+++ b/gdb/config/i386/mingw.mh
@@ -1,3 +1,3 @@
MH_CFLAGS=
-NATDEPFILES= i386-nat.o windows-nat.o i386-windows-nat.o
+NATDEPFILES= i386-nat.o i386-dregs.o windows-nat.o i386-windows-nat.o
XM_CLIBS=
diff --git a/gdb/config/i386/mingw64.mh b/gdb/config/i386/mingw64.mh
index ba6fd9f..740f508 100644
--- a/gdb/config/i386/mingw64.mh
+++ b/gdb/config/i386/mingw64.mh
@@ -1 +1 @@
-NATDEPFILES= i386-nat.o windows-nat.o amd64-windows-nat.o
+NATDEPFILES= i386-nat.o i386-dregs.o windows-nat.o amd64-windows-nat.o
diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in
index cbf36ab..76d8965 100644
--- a/gdb/gdbserver/Makefile.in
+++ b/gdb/gdbserver/Makefile.in
@@ -551,6 +551,10 @@ mips-linux-watch.o: ../common/mips-linux-watch.c
# Native object files rules from ../nat
+i386-dregs.o: ../nat/i386-dregs.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
+
linux-waitpid.o: ../nat/linux-waitpid.c
$(COMPILE) $<
$(POSTCOMPILE)
diff --git a/gdb/gdbserver/configure.srv b/gdb/gdbserver/configure.srv
index 097c7b4..8ff9c28 100644
--- a/gdb/gdbserver/configure.srv
+++ b/gdb/gdbserver/configure.srv
@@ -99,7 +99,7 @@ case "${target}" in
srv_linux_thread_db=yes
;;
i[34567]86-*-cygwin*) srv_regobj="$srv_i386_regobj"
- srv_tgtobj="i386-low.o win32-low.o win32-i386-low.o"
+ srv_tgtobj="i386-low.o i386-dregs.o win32-low.o win32-i386-low.o"
srv_xmlfiles="$srv_i386_xmlfiles"
;;
i[34567]86-*-linux*) srv_regobj="$srv_i386_linux_regobj"
@@ -108,7 +108,7 @@ case "${target}" in
srv_regobj="$srv_regobj $srv_amd64_linux_regobj"
srv_xmlfiles="${srv_xmlfiles} $srv_amd64_linux_xmlfiles"
fi
- srv_tgtobj="$srv_linux_obj linux-x86-low.o i386-low.o i387-fp.o"
+ srv_tgtobj="$srv_linux_obj linux-x86-low.o i386-low.o i386-dregs.o i387-fp.o"
srv_tgtobj="${srv_tgtobj} linux-btrace.o"
srv_linux_usrregs=yes
srv_linux_regsets=yes
@@ -125,7 +125,7 @@ case "${target}" in
;;
i[34567]86-*-mingw32ce*)
srv_regobj="$srv_i386_regobj"
- srv_tgtobj="i386-low.o win32-low.o win32-i386-low.o"
+ srv_tgtobj="i386-low.o i386-dregs.o win32-low.o win32-i386-low.o"
srv_tgtobj="${srv_tgtobj} wincecompat.o"
srv_xmlfiles="$srv_i386_xmlfiles"
# hostio_last_error implementation is in win32-low.c
@@ -134,7 +134,7 @@ case "${target}" in
srv_mingwce=yes
;;
i[34567]86-*-mingw*) srv_regobj="$srv_i386_regobj"
- srv_tgtobj="i386-low.o win32-low.o win32-i386-low.o"
+ srv_tgtobj="i386-low.o i386-dregs.o win32-low.o win32-i386-low.o"
srv_xmlfiles="$srv_i386_xmlfiles"
srv_mingw=yes
;;
@@ -315,7 +315,7 @@ case "${target}" in
srv_linux_thread_db=yes
;;
x86_64-*-linux*) srv_regobj="$srv_amd64_linux_regobj $srv_i386_linux_regobj"
- srv_tgtobj="$srv_linux_obj linux-x86-low.o i386-low.o i387-fp.o"
+ srv_tgtobj="$srv_linux_obj linux-x86-low.o i386-low.o i386-dregs.o i387-fp.o"
srv_tgtobj="${srv_tgtobj} linux-btrace.o"
srv_xmlfiles="$srv_i386_linux_xmlfiles $srv_amd64_linux_xmlfiles"
srv_linux_usrregs=yes # This is for i386 progs.
@@ -325,12 +325,12 @@ case "${target}" in
ipa_obj="${ipa_amd64_linux_regobj} linux-amd64-ipa.o"
;;
x86_64-*-mingw*) srv_regobj="$srv_amd64_regobj"
- srv_tgtobj="i386-low.o i387-fp.o win32-low.o win32-i386-low.o"
+ srv_tgtobj="i386-low.o i386-dregs.o i387-fp.o win32-low.o win32-i386-low.o"
srv_xmlfiles="$srv_i386_xmlfiles $srv_amd64_xmlfiles"
srv_mingw=yes
;;
x86_64-*-cygwin*) srv_regobj="$srv_amd64_regobj"
- srv_tgtobj="i386-low.o i387-fp.o win32-low.o win32-i386-low.o"
+ srv_tgtobj="i386-low.o i386-dregs.o i387-fp.o win32-low.o win32-i386-low.o"
srv_xmlfiles="$srv_i386_xmlfiles"
;;
diff --git a/gdb/gdbserver/i386-low.c b/gdb/gdbserver/i386-low.c
index c913c53..845c3b0 100644
--- a/gdb/gdbserver/i386-low.c
+++ b/gdb/gdbserver/i386-low.c
@@ -18,132 +18,8 @@
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "server.h"
-#include "target.h"
#include "i386-low.h"
-/* Support for hardware watchpoints and breakpoints using the i386
- debug registers.
-
- This provides several functions for inserting and removing
- hardware-assisted breakpoints and watchpoints, testing if one or
- more of the watchpoints triggered and at what address, checking
- whether a given region can be watched, etc.
-
- The functions below implement debug registers sharing by reference
- counts, and allow to watch regions up to 16 bytes long. */
-
-/* Support for 8-byte wide hw watchpoints. */
-#define TARGET_HAS_DR_LEN_8 (i386_get_debug_register_length () == 8)
-
-/* DR7 Debug Control register fields. */
-
-/* How many bits to skip in DR7 to get to R/W and LEN fields. */
-#define DR_CONTROL_SHIFT 16
-/* How many bits in DR7 per R/W and LEN field for each watchpoint. */
-#define DR_CONTROL_SIZE 4
-
-/* Watchpoint/breakpoint read/write fields in DR7. */
-#define DR_RW_EXECUTE (0x0) /* Break on instruction execution. */
-#define DR_RW_WRITE (0x1) /* Break on data writes. */
-#define DR_RW_READ (0x3) /* Break on data reads or writes. */
-
-/* This is here for completeness. No platform supports this
- functionality yet (as of March 2001). Note that the DE flag in the
- CR4 register needs to be set to support this. */
-#ifndef DR_RW_IORW
-#define DR_RW_IORW (0x2) /* Break on I/O reads or writes. */
-#endif
-
-/* Watchpoint/breakpoint length fields in DR7. The 2-bit left shift
- is so we could OR this with the read/write field defined above. */
-#define DR_LEN_1 (0x0 << 2) /* 1-byte region watch or breakpoint. */
-#define DR_LEN_2 (0x1 << 2) /* 2-byte region watch. */
-#define DR_LEN_4 (0x3 << 2) /* 4-byte region watch. */
-#define DR_LEN_8 (0x2 << 2) /* 8-byte region watch (AMD64). */
-
-/* Local and Global Enable flags in DR7.
-
- When the Local Enable flag is set, the breakpoint/watchpoint is
- enabled only for the current task; the processor automatically
- clears this flag on every task switch. When the Global Enable flag
- is set, the breakpoint/watchpoint is enabled for all tasks; the
- processor never clears this flag.
-
- Currently, all watchpoint are locally enabled. If you need to
- enable them globally, read the comment which pertains to this in
- i386_insert_aligned_watchpoint below. */
-#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit. */
-#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit. */
-#define DR_ENABLE_SIZE 2 /* Two enable bits per debug register. */
-
-/* Local and global exact breakpoint enable flags (a.k.a. slowdown
- flags). These are only required on i386, to allow detection of the
- exact instruction which caused a watchpoint to break; i486 and
- later processors do that automatically. We set these flags for
- backwards compatibility. */
-#define DR_LOCAL_SLOWDOWN (0x100)
-#define DR_GLOBAL_SLOWDOWN (0x200)
-
-/* Fields reserved by Intel. This includes the GD (General Detect
- Enable) flag, which causes a debug exception to be generated when a
- MOV instruction accesses one of the debug registers.
-
- FIXME: My Intel manual says we should use 0xF800, not 0xFC00. */
-#define DR_CONTROL_RESERVED (0xFC00)
-
-/* Auxiliary helper macros. */
-
-/* A value that masks all fields in DR7 that are reserved by Intel. */
-#define I386_DR_CONTROL_MASK (~DR_CONTROL_RESERVED)
-
-/* The I'th debug register is vacant if its Local and Global Enable
- bits are reset in the Debug Control register. */
-#define I386_DR_VACANT(state, i) \
- (((state)->dr_control_mirror & (3 << (DR_ENABLE_SIZE * (i)))) == 0)
-
-/* Locally enable the break/watchpoint in the I'th debug register. */
-#define I386_DR_LOCAL_ENABLE(state, i) \
- do { \
- (state)->dr_control_mirror |= \
- (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \
- } while (0)
-
-/* Globally enable the break/watchpoint in the I'th debug register. */
-#define I386_DR_GLOBAL_ENABLE(state, i) \
- do { \
- (state)->dr_control_mirror |= \
- (1 << (DR_GLOBAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \
- } while (0)
-
-/* Disable the break/watchpoint in the I'th debug register. */
-#define I386_DR_DISABLE(state, i) \
- do { \
- (state)->dr_control_mirror &= \
- ~(3 << (DR_ENABLE_SIZE * (i))); \
- } while (0)
-
-/* Set in DR7 the RW and LEN fields for the I'th debug register. */
-#define I386_DR_SET_RW_LEN(state, i, rwlen) \
- do { \
- (state)->dr_control_mirror &= \
- ~(0x0f << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \
- (state)->dr_control_mirror |= \
- ((rwlen) << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \
- } while (0)
-
-/* Get from DR7 the RW and LEN fields for the I'th debug register. */
-#define I386_DR_GET_RW_LEN(dr7, i) \
- (((dr7) \
- >> (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))) & 0x0f)
-
-/* Did the watchpoint whose address is in the I'th register break? */
-#define I386_DR_WATCH_HIT(dr6, i) ((dr6) & (1 << (i)))
-
-/* Types of operations supported by i386_handle_nonaligned_watchpoint. */
-typedef enum { WP_INSERT, WP_REMOVE, WP_COUNT } i386_wp_op_t;
-
-/* Implementation. */
-
/* Clear the reference counts and forget everything we knew about the
debug registers. */
@@ -160,466 +36,3 @@ i386_low_init_dregs (struct i386_debug_reg_state *state)
state->dr_control_mirror = 0;
state->dr_status_mirror = 0;
}
-
-/* Print the values of the mirrored debug registers. */
-
-static void
-i386_show_dr (struct i386_debug_reg_state *state,
- const char *func, CORE_ADDR addr,
- int len, enum target_hw_bp_type type)
-{
- int i;
-
- debug_printf ("%s", func);
- if (addr || len)
- debug_printf (" (addr=%s, len=%d, type=%s)",
- phex (addr, 8), len,
- type == hw_write ? "data-write"
- : (type == hw_read ? "data-read"
- : (type == hw_access ? "data-read/write"
- : (type == hw_execute ? "instruction-execute"
- /* FIXME: if/when I/O read/write
- watchpoints are supported, add them
- here. */
- : "??unknown??"))));
- debug_printf (":\n");
- debug_printf ("\tCONTROL (DR7): %s STATUS (DR6): %s\n",
- phex (state->dr_control_mirror, 8),
- phex (state->dr_status_mirror, 8));
- ALL_DEBUG_REGISTERS (i)
- {
- debug_printf ("\
-\tDR%d: addr=0x%s, ref.count=%d DR%d: addr=0x%s, ref.count=%d\n",
- i, phex (state->dr_mirror[i],
- i386_get_debug_register_length ()),
- state->dr_ref_count[i],
- i + 1, phex (state->dr_mirror[i + 1],
- i386_get_debug_register_length ()),
- state->dr_ref_count[i + 1]);
- i++;
- }
-}
-
-/* Return the value of a 4-bit field for DR7 suitable for watching a
- region of LEN bytes for accesses of type TYPE. LEN is assumed to
- have the value of 1, 2, or 4. */
-
-static unsigned
-i386_length_and_rw_bits (int len, enum target_hw_bp_type type)
-{
- unsigned rw;
-
- switch (type)
- {
- case hw_execute:
- rw = DR_RW_EXECUTE;
- break;
- case hw_write:
- rw = DR_RW_WRITE;
- break;
- case hw_read:
- internal_error (__FILE__, __LINE__,
- _("The i386 doesn't support "
- "data-read watchpoints.\n"));
- case hw_access:
- rw = DR_RW_READ;
- break;
-#if 0
- /* Not yet supported. */
- case hw_io_access:
- rw = DR_RW_IORW;
- break;
-#endif
- default:
- internal_error (__FILE__, __LINE__, _("\
-Invalid hardware breakpoint type %d in i386_length_and_rw_bits.\n"),
- (int) type);
- }
-
- switch (len)
- {
- case 1:
- return (DR_LEN_1 | rw);
- case 2:
- return (DR_LEN_2 | rw);
- case 4:
- return (DR_LEN_4 | rw);
- case 8:
- if (TARGET_HAS_DR_LEN_8)
- return (DR_LEN_8 | rw);
- /* ELSE FALL THROUGH */
- default:
- internal_error (__FILE__, __LINE__, _("\
-Invalid hardware breakpoint length %d in i386_length_and_rw_bits.\n"), len);
- }
-}
-
-/* Insert a watchpoint at address ADDR, which is assumed to be aligned
- according to the length of the region to watch. LEN_RW_BITS is the
- value of the bits from DR7 which describes the length and access
- type of the region to be watched by this watchpoint. Return 0 on
- success, -1 on failure. */
-
-static int
-i386_insert_aligned_watchpoint (struct i386_debug_reg_state *state,
- CORE_ADDR addr, unsigned len_rw_bits)
-{
- int i;
-
- if (!i386_dr_low_can_set_addr () || !i386_dr_low_can_set_control ())
- return -1;
-
- /* First, look for an occupied debug register with the same address
- and the same RW and LEN definitions. If we find one, we can
- reuse it for this watchpoint as well (and save a register). */
- ALL_DEBUG_REGISTERS (i)
- {
- if (!I386_DR_VACANT (state, i)
- && state->dr_mirror[i] == addr
- && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits)
- {
- state->dr_ref_count[i]++;
- return 0;
- }
- }
-
- /* Next, look for a vacant debug register. */
- ALL_DEBUG_REGISTERS (i)
- {
- if (I386_DR_VACANT (state, i))
- break;
- }
-
- /* No more debug registers! */
- if (i >= DR_NADDR)
- return -1;
-
- /* Now set up the register I to watch our region. */
-
- /* Record the info in our local mirrored array. */
- state->dr_mirror[i] = addr;
- state->dr_ref_count[i] = 1;
- I386_DR_SET_RW_LEN (state, i, len_rw_bits);
- /* Note: we only enable the watchpoint locally, i.e. in the current
- task. Currently, no i386 target allows or supports global
- watchpoints; however, if any target would want that in the
- future, GDB should probably provide a command to control whether
- to enable watchpoints globally or locally, and the code below
- should use global or local enable and slow-down flags as
- appropriate. */
- I386_DR_LOCAL_ENABLE (state, i);
- state->dr_control_mirror |= DR_LOCAL_SLOWDOWN;
- state->dr_control_mirror &= I386_DR_CONTROL_MASK;
-
- return 0;
-}
-
-/* Remove a watchpoint at address ADDR, which is assumed to be aligned
- according to the length of the region to watch. LEN_RW_BITS is the
- value of the bits from DR7 which describes the length and access
- type of the region watched by this watchpoint. Return 0 on
- success, -1 on failure. */
-
-static int
-i386_remove_aligned_watchpoint (struct i386_debug_reg_state *state,
- CORE_ADDR addr, unsigned len_rw_bits)
-{
- int i, retval = -1;
-
- ALL_DEBUG_REGISTERS (i)
- {
- if (!I386_DR_VACANT (state, i)
- && state->dr_mirror[i] == addr
- && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits)
- {
- if (--state->dr_ref_count[i] == 0) /* No longer in use? */
- {
- /* Reset our mirror. */
- state->dr_mirror[i] = 0;
- I386_DR_DISABLE (state, i);
- }
- retval = 0;
- }
- }
-
- return retval;
-}
-
-/* Insert or remove a (possibly non-aligned) watchpoint, or count the
- number of debug registers required to watch a region at address
- ADDR whose length is LEN for accesses of type TYPE. Return 0 on
- successful insertion or removal, a positive number when queried
- about the number of registers, or -1 on failure. If WHAT is not a
- valid value, bombs through internal_error. */
-
-static int
-i386_handle_nonaligned_watchpoint (struct i386_debug_reg_state *state,
- i386_wp_op_t what, CORE_ADDR addr, int len,
- enum target_hw_bp_type type)
-{
- int retval = 0;
- int max_wp_len = TARGET_HAS_DR_LEN_8 ? 8 : 4;
-
- static const int size_try_array[8][8] =
- {
- {1, 1, 1, 1, 1, 1, 1, 1}, /* Trying size one. */
- {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size two. */
- {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size three. */
- {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size four. */
- {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size five. */
- {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size six. */
- {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size seven. */
- {8, 1, 2, 1, 4, 1, 2, 1}, /* Trying size eight. */
- };
-
- while (len > 0)
- {
- int align = addr % max_wp_len;
- /* Four (eight on AMD64) is the maximum length a debug register
- can watch. */
- int try = (len > max_wp_len ? (max_wp_len - 1) : len - 1);
- int size = size_try_array[try][align];
-
- if (what == WP_COUNT)
- {
- /* size_try_array[] is defined such that each iteration
- through the loop is guaranteed to produce an address and a
- size that can be watched with a single debug register.
- Thus, for counting the registers required to watch a
- region, we simply need to increment the count on each
- iteration. */
- retval++;
- }
- else
- {
- unsigned len_rw = i386_length_and_rw_bits (size, type);
-
- if (what == WP_INSERT)
- retval = i386_insert_aligned_watchpoint (state, addr, len_rw);
- else if (what == WP_REMOVE)
- retval = i386_remove_aligned_watchpoint (state, addr, len_rw);
- else
- internal_error (__FILE__, __LINE__, _("\
-Invalid value %d of operation in i386_handle_nonaligned_watchpoint.\n"),
- (int) what);
- if (retval)
- break;
- }
-
- addr += size;
- len -= size;
- }
-
- return retval;
-}
-
-/* Update the inferior debug registers state, in STATE, with the
- new debug registers state, in NEW_STATE. */
-
-static void
-i386_update_inferior_debug_regs (struct i386_debug_reg_state *state,
- struct i386_debug_reg_state *new_state)
-{
- int i;
-
- ALL_DEBUG_REGISTERS (i)
- {
- if (I386_DR_VACANT (new_state, i) != I386_DR_VACANT (state, i))
- i386_dr_low_set_addr (new_state, i);
- else
- gdb_assert (new_state->dr_mirror[i] == state->dr_mirror[i]);
- }
-
- if (new_state->dr_control_mirror != state->dr_control_mirror)
- i386_dr_low_set_control (new_state);
-
- *state = *new_state;
-}
-
-/* Insert a watchpoint to watch a memory region which starts at
- address ADDR and whose length is LEN bytes. Watch memory accesses
- of the type TYPE. Return 0 on success, -1 on failure. */
-
-int
-i386_dr_insert_watchpoint (struct i386_debug_reg_state *state,
- enum target_hw_bp_type type,
- CORE_ADDR addr, int len)
-{
- int retval;
- /* Work on a local copy of the debug registers, and on success,
- commit the change back to the inferior. */
- struct i386_debug_reg_state local_state = *state;
-
- if (type == hw_read)
- return 1; /* unsupported */
-
- if (((len != 1 && len != 2 && len != 4)
- && !(TARGET_HAS_DR_LEN_8 && len == 8))
- || addr % len != 0)
- {
- retval = i386_handle_nonaligned_watchpoint (&local_state,
- WP_INSERT,
- addr, len, type);
- }
- else
- {
- unsigned len_rw = i386_length_and_rw_bits (len, type);
-
- retval = i386_insert_aligned_watchpoint (&local_state,
- addr, len_rw);
- }
-
- if (retval == 0)
- i386_update_inferior_debug_regs (state, &local_state);
-
- if (debug_hw_points)
- i386_show_dr (state, "insert_watchpoint", addr, len, type);
-
- return retval;
-}
-
-/* Remove a watchpoint that watched the memory region which starts at
- address ADDR, whose length is LEN bytes, and for accesses of the
- type TYPE. Return 0 on success, -1 on failure. */
-
-int
-i386_dr_remove_watchpoint (struct i386_debug_reg_state *state,
- enum target_hw_bp_type type,
- CORE_ADDR addr, int len)
-{
- int retval;
- /* Work on a local copy of the debug registers, and on success,
- commit the change back to the inferior. */
- struct i386_debug_reg_state local_state = *state;
-
- if (((len != 1 && len != 2 && len != 4)
- && !(TARGET_HAS_DR_LEN_8 && len == 8))
- || addr % len != 0)
- {
- retval = i386_handle_nonaligned_watchpoint (&local_state,
- WP_REMOVE,
- addr, len, type);
- }
- else
- {
- unsigned len_rw = i386_length_and_rw_bits (len, type);
-
- retval = i386_remove_aligned_watchpoint (&local_state,
- addr, len_rw);
- }
-
- if (retval == 0)
- i386_update_inferior_debug_regs (state, &local_state);
-
- if (debug_hw_points)
- i386_show_dr (state, "remove_watchpoint", addr, len, type);
-
- return retval;
-}
-
-/* Return non-zero if we can watch a memory region that starts at
- address ADDR and whose length is LEN bytes. */
-
-int
-i386_dr_region_ok_for_watchpoint (struct i386_debug_reg_state *state,
- CORE_ADDR addr, int len)
-{
- int nregs;
-
- /* Compute how many aligned watchpoints we would need to cover this
- region. */
- nregs = i386_handle_nonaligned_watchpoint (state, WP_COUNT,
- addr, len, hw_write);
- return nregs <= DR_NADDR ? 1 : 0;
-}
-
-/* If the inferior has some break/watchpoint that triggered, set the
- address associated with that break/watchpoint and return non-zero.
- Otherwise, return zero. */
-
-int
-i386_dr_stopped_data_address (struct i386_debug_reg_state *state,
- CORE_ADDR *addr_p)
-{
- CORE_ADDR addr = 0;
- int i;
- int rc = 0;
- /* The current thread's DR_STATUS. We always need to read this to
- check whether some watchpoint caused the trap. */
- unsigned status;
- /* We need DR_CONTROL as well, but only iff DR_STATUS indicates a
- data breakpoint trap. Only fetch it when necessary, to avoid an
- unnecessary extra syscall when no watchpoint triggered. */
- int control_p = 0;
- unsigned control = 0;
-
- /* In non-stop/async, threads can be running while we change the
- global dr_mirror (and friends). Say, we set a watchpoint, and
- let threads resume. Now, say you delete the watchpoint, or
- add/remove watchpoints such that dr_mirror changes while threads
- are running. On targets that support non-stop,
- inserting/deleting watchpoints updates the global dr_mirror only.
- It does not update the real thread's debug registers; that's only
- done prior to resume. Instead, if threads are running when the
- mirror changes, a temporary and transparent stop on all threads
- is forced so they can get their copy of the debug registers
- updated on re-resume. Now, say, a thread hit a watchpoint before
- having been updated with the new dr_mirror contents, and we
- haven't yet handled the corresponding SIGTRAP. If we trusted
- dr_mirror below, we'd mistake the real trapped address (from the
- last time we had updated debug registers in the thread) with
- whatever was currently in dr_mirror. So to fix this, dr_mirror
- always represents intention, what we _want_ threads to have in
- debug registers. To get at the address and cause of the trap, we
- need to read the state the thread still has in its debug
- registers.
-
- In sum, always get the current debug register values the current
- thread has, instead of trusting the global mirror. If the thread
- was running when we last changed watchpoints, the mirror no
- longer represents what was set in this thread's debug
- registers. */
- status = i386_dr_low_get_status ();
-
- ALL_DEBUG_REGISTERS (i)
- {
- if (!I386_DR_WATCH_HIT (status, i))
- continue;
-
- if (!control_p)
- {
- control = i386_dr_low_get_control ();
- control_p = 1;
- }
-
- /* This second condition makes sure DRi is set up for a data
- watchpoint, not a hardware breakpoint. The reason is that
- GDB doesn't call the target_stopped_data_address method
- except for data watchpoints. In other words, I'm being
- paranoiac. */
- if (I386_DR_GET_RW_LEN (control, i) != 0)
- {
- addr = i386_dr_low_get_addr (i);
- rc = 1;
- if (debug_hw_points)
- i386_show_dr (state, "watchpoint_hit", addr, -1, hw_write);
- }
- }
-
- if (debug_hw_points && addr == 0)
- i386_show_dr (state, "stopped_data_addr", 0, 0, hw_write);
-
- if (rc)
- *addr_p = addr;
- return rc;
-}
-
-/* Return non-zero if the inferior has some watchpoint that triggered.
- Otherwise return zero. */
-
-int
-i386_dr_stopped_by_watchpoint (struct i386_debug_reg_state *state)
-{
- CORE_ADDR addr = 0;
- return i386_dr_stopped_data_address (state, &addr);
-}
diff --git a/gdb/i386-nat.c b/gdb/i386-nat.c
index c956583..750b878 100644
--- a/gdb/i386-nat.c
+++ b/gdb/i386-nat.c
@@ -19,11 +19,7 @@
#include "defs.h"
#include "i386-nat.h"
-#include "breakpoint.h"
-#include "command.h"
#include "gdbcmd.h"
-#include "target.h"
-#include "gdb_assert.h"
#include "inferior.h"
/* Support for hardware watchpoints and breakpoints using the i386
@@ -38,122 +34,11 @@
counts, and allow to watch regions up to 16 bytes long. */
/* Whether or not to print the mirrored debug registers. */
-static int debug_hw_points;
-
-/* Function used for printing mirrored debug registers. */
-#define debug_printf(fmt, args...) \
- fprintf_unfiltered (gdb_stdlog, fmt, ##args);
+int debug_hw_points;
/* Low-level function vector. */
struct i386_dr_low_type i386_dr_low;
-/* Support for 8-byte wide hw watchpoints. */
-#define TARGET_HAS_DR_LEN_8 (i386_get_debug_register_length () == 8)
-
-/* DR7 Debug Control register fields. */
-
-/* How many bits to skip in DR7 to get to R/W and LEN fields. */
-#define DR_CONTROL_SHIFT 16
-/* How many bits in DR7 per R/W and LEN field for each watchpoint. */
-#define DR_CONTROL_SIZE 4
-
-/* Watchpoint/breakpoint read/write fields in DR7. */
-#define DR_RW_EXECUTE (0x0) /* Break on instruction execution. */
-#define DR_RW_WRITE (0x1) /* Break on data writes. */
-#define DR_RW_READ (0x3) /* Break on data reads or writes. */
-
-/* This is here for completeness. No platform supports this
- functionality yet (as of March 2001). Note that the DE flag in the
- CR4 register needs to be set to support this. */
-#ifndef DR_RW_IORW
-#define DR_RW_IORW (0x2) /* Break on I/O reads or writes. */
-#endif
-
-/* Watchpoint/breakpoint length fields in DR7. The 2-bit left shift
- is so we could OR this with the read/write field defined above. */
-#define DR_LEN_1 (0x0 << 2) /* 1-byte region watch or breakpoint. */
-#define DR_LEN_2 (0x1 << 2) /* 2-byte region watch. */
-#define DR_LEN_4 (0x3 << 2) /* 4-byte region watch. */
-#define DR_LEN_8 (0x2 << 2) /* 8-byte region watch (AMD64). */
-
-/* Local and Global Enable flags in DR7.
-
- When the Local Enable flag is set, the breakpoint/watchpoint is
- enabled only for the current task; the processor automatically
- clears this flag on every task switch. When the Global Enable flag
- is set, the breakpoint/watchpoint is enabled for all tasks; the
- processor never clears this flag.
-
- Currently, all watchpoint are locally enabled. If you need to
- enable them globally, read the comment which pertains to this in
- i386_insert_aligned_watchpoint below. */
-#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit. */
-#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit. */
-#define DR_ENABLE_SIZE 2 /* Two enable bits per debug register. */
-
-/* Local and global exact breakpoint enable flags (a.k.a. slowdown
- flags). These are only required on i386, to allow detection of the
- exact instruction which caused a watchpoint to break; i486 and
- later processors do that automatically. We set these flags for
- backwards compatibility. */
-#define DR_LOCAL_SLOWDOWN (0x100)
-#define DR_GLOBAL_SLOWDOWN (0x200)
-
-/* Fields reserved by Intel. This includes the GD (General Detect
- Enable) flag, which causes a debug exception to be generated when a
- MOV instruction accesses one of the debug registers.
-
- FIXME: My Intel manual says we should use 0xF800, not 0xFC00. */
-#define DR_CONTROL_RESERVED (0xFC00)
-
-/* Auxiliary helper macros. */
-
-/* A value that masks all fields in DR7 that are reserved by Intel. */
-#define I386_DR_CONTROL_MASK (~DR_CONTROL_RESERVED)
-
-/* The I'th debug register is vacant if its Local and Global Enable
- bits are reset in the Debug Control register. */
-#define I386_DR_VACANT(state, i) \
- (((state)->dr_control_mirror & (3 << (DR_ENABLE_SIZE * (i)))) == 0)
-
-/* Locally enable the break/watchpoint in the I'th debug register. */
-#define I386_DR_LOCAL_ENABLE(state, i) \
- do { \
- (state)->dr_control_mirror |= \
- (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \
- } while (0)
-
-/* Globally enable the break/watchpoint in the I'th debug register. */
-#define I386_DR_GLOBAL_ENABLE(state, i) \
- do { \
- (state)->dr_control_mirror |= \
- (1 << (DR_GLOBAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \
- } while (0)
-
-/* Disable the break/watchpoint in the I'th debug register. */
-#define I386_DR_DISABLE(state, i) \
- do { \
- (state)->dr_control_mirror &= \
- ~(3 << (DR_ENABLE_SIZE * (i))); \
- } while (0)
-
-/* Set in DR7 the RW and LEN fields for the I'th debug register. */
-#define I386_DR_SET_RW_LEN(state, i, rwlen) \
- do { \
- (state)->dr_control_mirror &= \
- ~(0x0f << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \
- (state)->dr_control_mirror |= \
- ((rwlen) << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \
- } while (0)
-
-/* Get from DR7 the RW and LEN fields for the I'th debug register. */
-#define I386_DR_GET_RW_LEN(dr7, i) \
- (((dr7) \
- >> (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))) & 0x0f)
-
-/* Did the watchpoint whose address is in the I'th register break? */
-#define I386_DR_WATCH_HIT(dr6, i) ((dr6) & (1 << (i)))
-
/* Per-process data. We don't bind this to a per-inferior registry
because of targets like x86 GNU/Linux that need to keep track of
processes that aren't bound to any inferior (e.g., fork children,
@@ -252,11 +137,6 @@ i386_forget_process (pid_t pid)
}
}
-/* Types of operations supported by i386_handle_nonaligned_watchpoint. */
-typedef enum { WP_INSERT, WP_REMOVE, WP_COUNT } i386_wp_op_t;
-
-/* Implementation. */
-
/* Clear the reference counts and forget everything we knew about the
debug registers. */
@@ -267,281 +147,6 @@ i386_cleanup_dregs (void)
i386_forget_process (ptid_get_pid (inferior_ptid));
}
-/* Print the values of the mirrored debug registers. */
-
-static void
-i386_show_dr (struct i386_debug_reg_state *state,
- const char *func, CORE_ADDR addr,
- int len, enum target_hw_bp_type type)
-{
- int i;
-
- debug_printf ("%s", func);
- if (addr || len)
- debug_printf (" (addr=%s, len=%d, type=%s)",
- phex (addr, 8), len,
- type == hw_write ? "data-write"
- : (type == hw_read ? "data-read"
- : (type == hw_access ? "data-read/write"
- : (type == hw_execute ? "instruction-execute"
- /* FIXME: if/when I/O read/write
- watchpoints are supported, add them
- here. */
- : "??unknown??"))));
- debug_printf (":\n");
- debug_printf ("\tCONTROL (DR7): %s STATUS (DR6): %s\n",
- phex (state->dr_control_mirror, 8),
- phex (state->dr_status_mirror, 8));
- ALL_DEBUG_REGISTERS (i)
- {
- debug_printf ("\
-\tDR%d: addr=0x%s, ref.count=%d DR%d: addr=0x%s, ref.count=%d\n",
- i, phex (state->dr_mirror[i],
- i386_get_debug_register_length ()),
- state->dr_ref_count[i],
- i + 1, phex (state->dr_mirror[i + 1],
- i386_get_debug_register_length ()),
- state->dr_ref_count[i + 1]);
- i++;
- }
-}
-
-/* Return the value of a 4-bit field for DR7 suitable for watching a
- region of LEN bytes for accesses of type TYPE. LEN is assumed to
- have the value of 1, 2, or 4. */
-
-static unsigned
-i386_length_and_rw_bits (int len, enum target_hw_bp_type type)
-{
- unsigned rw;
-
- switch (type)
- {
- case hw_execute:
- rw = DR_RW_EXECUTE;
- break;
- case hw_write:
- rw = DR_RW_WRITE;
- break;
- case hw_read:
- internal_error (__FILE__, __LINE__,
- _("The i386 doesn't support "
- "data-read watchpoints.\n"));
- case hw_access:
- rw = DR_RW_READ;
- break;
-#if 0
- /* Not yet supported. */
- case hw_io_access:
- rw = DR_RW_IORW;
- break;
-#endif
- default:
- internal_error (__FILE__, __LINE__, _("\
-Invalid hardware breakpoint type %d in i386_length_and_rw_bits.\n"),
- (int) type);
- }
-
- switch (len)
- {
- case 1:
- return (DR_LEN_1 | rw);
- case 2:
- return (DR_LEN_2 | rw);
- case 4:
- return (DR_LEN_4 | rw);
- case 8:
- if (TARGET_HAS_DR_LEN_8)
- return (DR_LEN_8 | rw);
- /* ELSE FALL THROUGH */
- default:
- internal_error (__FILE__, __LINE__, _("\
-Invalid hardware breakpoint length %d in i386_length_and_rw_bits.\n"), len);
- }
-}
-
-/* Insert a watchpoint at address ADDR, which is assumed to be aligned
- according to the length of the region to watch. LEN_RW_BITS is the
- value of the bits from DR7 which describes the length and access
- type of the region to be watched by this watchpoint. Return 0 on
- success, -1 on failure. */
-
-static int
-i386_insert_aligned_watchpoint (struct i386_debug_reg_state *state,
- CORE_ADDR addr, unsigned len_rw_bits)
-{
- int i;
-
- if (!i386_dr_low_can_set_addr () || !i386_dr_low_can_set_control ())
- return -1;
-
- /* First, look for an occupied debug register with the same address
- and the same RW and LEN definitions. If we find one, we can
- reuse it for this watchpoint as well (and save a register). */
- ALL_DEBUG_REGISTERS (i)
- {
- if (!I386_DR_VACANT (state, i)
- && state->dr_mirror[i] == addr
- && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits)
- {
- state->dr_ref_count[i]++;
- return 0;
- }
- }
-
- /* Next, look for a vacant debug register. */
- ALL_DEBUG_REGISTERS (i)
- {
- if (I386_DR_VACANT (state, i))
- break;
- }
-
- /* No more debug registers! */
- if (i >= DR_NADDR)
- return -1;
-
- /* Now set up the register I to watch our region. */
-
- /* Record the info in our local mirrored array. */
- state->dr_mirror[i] = addr;
- state->dr_ref_count[i] = 1;
- I386_DR_SET_RW_LEN (state, i, len_rw_bits);
- /* Note: we only enable the watchpoint locally, i.e. in the current
- task. Currently, no i386 target allows or supports global
- watchpoints; however, if any target would want that in the
- future, GDB should probably provide a command to control whether
- to enable watchpoints globally or locally, and the code below
- should use global or local enable and slow-down flags as
- appropriate. */
- I386_DR_LOCAL_ENABLE (state, i);
- state->dr_control_mirror |= DR_LOCAL_SLOWDOWN;
- state->dr_control_mirror &= I386_DR_CONTROL_MASK;
-
- return 0;
-}
-
-/* Remove a watchpoint at address ADDR, which is assumed to be aligned
- according to the length of the region to watch. LEN_RW_BITS is the
- value of the bits from DR7 which describes the length and access
- type of the region watched by this watchpoint. Return 0 on
- success, -1 on failure. */
-
-static int
-i386_remove_aligned_watchpoint (struct i386_debug_reg_state *state,
- CORE_ADDR addr, unsigned len_rw_bits)
-{
- int i, retval = -1;
-
- ALL_DEBUG_REGISTERS (i)
- {
- if (!I386_DR_VACANT (state, i)
- && state->dr_mirror[i] == addr
- && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits)
- {
- if (--state->dr_ref_count[i] == 0) /* No longer in use? */
- {
- /* Reset our mirror. */
- state->dr_mirror[i] = 0;
- I386_DR_DISABLE (state, i);
- }
- retval = 0;
- }
- }
-
- return retval;
-}
-
-/* Insert or remove a (possibly non-aligned) watchpoint, or count the
- number of debug registers required to watch a region at address
- ADDR whose length is LEN for accesses of type TYPE. Return 0 on
- successful insertion or removal, a positive number when queried
- about the number of registers, or -1 on failure. If WHAT is not a
- valid value, bombs through internal_error. */
-
-static int
-i386_handle_nonaligned_watchpoint (struct i386_debug_reg_state *state,
- i386_wp_op_t what, CORE_ADDR addr, int len,
- enum target_hw_bp_type type)
-{
- int retval = 0;
- int max_wp_len = TARGET_HAS_DR_LEN_8 ? 8 : 4;
-
- static const int size_try_array[8][8] =
- {
- {1, 1, 1, 1, 1, 1, 1, 1}, /* Trying size one. */
- {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size two. */
- {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size three. */
- {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size four. */
- {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size five. */
- {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size six. */
- {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size seven. */
- {8, 1, 2, 1, 4, 1, 2, 1}, /* Trying size eight. */
- };
-
- while (len > 0)
- {
- int align = addr % max_wp_len;
- /* Four (eight on AMD64) is the maximum length a debug register
- can watch. */
- int try = (len > max_wp_len ? (max_wp_len - 1) : len - 1);
- int size = size_try_array[try][align];
-
- if (what == WP_COUNT)
- {
- /* size_try_array[] is defined such that each iteration
- through the loop is guaranteed to produce an address and a
- size that can be watched with a single debug register.
- Thus, for counting the registers required to watch a
- region, we simply need to increment the count on each
- iteration. */
- retval++;
- }
- else
- {
- unsigned len_rw = i386_length_and_rw_bits (size, type);
-
- if (what == WP_INSERT)
- retval = i386_insert_aligned_watchpoint (state, addr, len_rw);
- else if (what == WP_REMOVE)
- retval = i386_remove_aligned_watchpoint (state, addr, len_rw);
- else
- internal_error (__FILE__, __LINE__, _("\
-Invalid value %d of operation in i386_handle_nonaligned_watchpoint.\n"),
- (int) what);
- if (retval)
- break;
- }
-
- addr += size;
- len -= size;
- }
-
- return retval;
-}
-
-/* Update the inferior debug registers state, in STATE, with the
- new debug registers state, in NEW_STATE. */
-
-static void
-i386_update_inferior_debug_regs (struct i386_debug_reg_state *state,
- struct i386_debug_reg_state *new_state)
-{
- int i;
-
- ALL_DEBUG_REGISTERS (i)
- {
- if (I386_DR_VACANT (new_state, i) != I386_DR_VACANT (state, i))
- i386_dr_low_set_addr (new_state, i);
- else
- gdb_assert (new_state->dr_mirror[i] == state->dr_mirror[i]);
- }
-
- if (new_state->dr_control_mirror != state->dr_control_mirror)
- i386_dr_low_set_control (new_state);
-
- *state = *new_state;
-}
-
/* Insert a watchpoint to watch a memory region which starts at
address ADDR and whose length is LEN bytes. Watch memory accesses
of the type TYPE. Return 0 on success, -1 on failure. */
@@ -553,37 +158,8 @@ i386_insert_watchpoint (struct target_ops *self,
{
struct i386_debug_reg_state *state
= i386_debug_reg_state (ptid_get_pid (inferior_ptid));
- int retval;
- /* Work on a local copy of the debug registers, and on success,
- commit the change back to the inferior. */
- struct i386_debug_reg_state local_state = *state;
-
- if (type == hw_read)
- return 1; /* unsupported */
-
- if (((len != 1 && len != 2 && len != 4)
- && !(TARGET_HAS_DR_LEN_8 && len == 8))
- || addr % len != 0)
- {
- retval = i386_handle_nonaligned_watchpoint (&local_state,
- WP_INSERT,
- addr, len, type);
- }
- else
- {
- unsigned len_rw = i386_length_and_rw_bits (len, type);
-
- retval = i386_insert_aligned_watchpoint (&local_state,
- addr, len_rw);
- }
-
- if (retval == 0)
- i386_update_inferior_debug_regs (state, &local_state);
- if (debug_hw_points)
- i386_show_dr (state, "insert_watchpoint", addr, len, type);
-
- return retval;
+ return i386_dr_insert_watchpoint (state, type, addr, len);
}
/* Remove a watchpoint that watched the memory region which starts at
@@ -596,34 +172,8 @@ i386_remove_watchpoint (struct target_ops *self,
{
struct i386_debug_reg_state *state
= i386_debug_reg_state (ptid_get_pid (inferior_ptid));
- int retval;
- /* Work on a local copy of the debug registers, and on success,
- commit the change back to the inferior. */
- struct i386_debug_reg_state local_state = *state;
-
- if (((len != 1 && len != 2 && len != 4)
- && !(TARGET_HAS_DR_LEN_8 && len == 8))
- || addr % len != 0)
- {
- retval = i386_handle_nonaligned_watchpoint (&local_state,
- WP_REMOVE,
- addr, len, type);
- }
- else
- {
- unsigned len_rw = i386_length_and_rw_bits (len, type);
-
- retval = i386_remove_aligned_watchpoint (&local_state,
- addr, len_rw);
- }
- if (retval == 0)
- i386_update_inferior_debug_regs (state, &local_state);
-
- if (debug_hw_points)
- i386_show_dr (state, "remove_watchpoint", addr, len, type);
-
- return retval;
+ return i386_dr_remove_watchpoint (state, type, addr, len);
}
/* Return non-zero if we can watch a memory region that starts at
@@ -635,13 +185,8 @@ i386_region_ok_for_watchpoint (struct target_ops *self,
{
struct i386_debug_reg_state *state
= i386_debug_reg_state (ptid_get_pid (inferior_ptid));
- int nregs;
- /* Compute how many aligned watchpoints we would need to cover this
- region. */
- nregs = i386_handle_nonaligned_watchpoint (state, WP_COUNT,
- addr, len, hw_write);
- return nregs <= DR_NADDR ? 1 : 0;
+ return i386_dr_region_ok_for_watchpoint (state, addr, len);
}
/* If the inferior has some break/watchpoint that triggered, set the
@@ -653,77 +198,8 @@ i386_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr_p)
{
struct i386_debug_reg_state *state
= i386_debug_reg_state (ptid_get_pid (inferior_ptid));
- CORE_ADDR addr = 0;
- int i;
- int rc = 0;
- /* The current thread's DR_STATUS. We always need to read this to
- check whether some watchpoint caused the trap. */
- unsigned status;
- /* We need DR_CONTROL as well, but only iff DR_STATUS indicates a
- data breakpoint trap. Only fetch it when necessary, to avoid an
- unnecessary extra syscall when no watchpoint triggered. */
- int control_p = 0;
- unsigned control = 0;
-
- /* In non-stop/async, threads can be running while we change the
- global dr_mirror (and friends). Say, we set a watchpoint, and
- let threads resume. Now, say you delete the watchpoint, or
- add/remove watchpoints such that dr_mirror changes while threads
- are running. On targets that support non-stop,
- inserting/deleting watchpoints updates the global dr_mirror only.
- It does not update the real thread's debug registers; that's only
- done prior to resume. Instead, if threads are running when the
- mirror changes, a temporary and transparent stop on all threads
- is forced so they can get their copy of the debug registers
- updated on re-resume. Now, say, a thread hit a watchpoint before
- having been updated with the new dr_mirror contents, and we
- haven't yet handled the corresponding SIGTRAP. If we trusted
- dr_mirror below, we'd mistake the real trapped address (from the
- last time we had updated debug registers in the thread) with
- whatever was currently in dr_mirror. So to fix this, dr_mirror
- always represents intention, what we _want_ threads to have in
- debug registers. To get at the address and cause of the trap, we
- need to read the state the thread still has in its debug
- registers.
-
- In sum, always get the current debug register values the current
- thread has, instead of trusting the global mirror. If the thread
- was running when we last changed watchpoints, the mirror no
- longer represents what was set in this thread's debug
- registers. */
- status = i386_dr_low_get_status ();
-
- ALL_DEBUG_REGISTERS (i)
- {
- if (!I386_DR_WATCH_HIT (status, i))
- continue;
-
- if (!control_p)
- {
- control = i386_dr_low_get_control ();
- control_p = 1;
- }
-
- /* This second condition makes sure DRi is set up for a data
- watchpoint, not a hardware breakpoint. The reason is that
- GDB doesn't call the target_stopped_data_address method
- except for data watchpoints. In other words, I'm being
- paranoiac. */
- if (I386_DR_GET_RW_LEN (control, i) != 0)
- {
- addr = i386_dr_low_get_addr (i);
- rc = 1;
- if (debug_hw_points)
- i386_show_dr (state, "watchpoint_hit", addr, -1, hw_write);
- }
- }
-
- if (debug_hw_points && addr == 0)
- i386_show_dr (state, "stopped_data_addr", 0, 0, hw_write);
- if (rc)
- *addr_p = addr;
- return rc;
+ return i386_dr_stopped_data_address (state, addr_p);
}
/* Return non-zero if the inferior has some watchpoint that triggered.
diff --git a/gdb/i386-nat.h b/gdb/i386-nat.h
index f20b013..4a213b3 100644
--- a/gdb/i386-nat.h
+++ b/gdb/i386-nat.h
@@ -27,6 +27,9 @@
/* Hardware-assisted breakpoints and watchpoints. */
+/* Whether or not to print the mirrored debug registers. */
+extern int debug_hw_points;
+
/* Add watchpoint methods to the provided target_ops.
Targets using i386 family debug registers for watchpoints should call
this. */
diff --git a/gdb/nat/i386-dregs.c b/gdb/nat/i386-dregs.c
new file mode 100644
index 0000000..0067a90
--- /dev/null
+++ b/gdb/nat/i386-dregs.c
@@ -0,0 +1,617 @@
+/* Debug register code for the i386.
+
+ Copyright (C) 2001-2014 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#ifdef GDBSERVER
+#include "server.h"
+#include "i386-low.h"
+#else
+#include "defs.h"
+#include "i386-nat.h"
+#include "inferior.h"
+#endif
+
+/* Support for hardware watchpoints and breakpoints using the i386
+ debug registers.
+
+ This provides several functions for inserting and removing
+ hardware-assisted breakpoints and watchpoints, testing if one or
+ more of the watchpoints triggered and at what address, checking
+ whether a given region can be watched, etc.
+
+ The functions below implement debug registers sharing by reference
+ counts, and allow to watch regions up to 16 bytes long. */
+
+/* Support for 8-byte wide hw watchpoints. */
+#define TARGET_HAS_DR_LEN_8 (i386_get_debug_register_length () == 8)
+
+/* DR7 Debug Control register fields. */
+
+/* How many bits to skip in DR7 to get to R/W and LEN fields. */
+#define DR_CONTROL_SHIFT 16
+/* How many bits in DR7 per R/W and LEN field for each watchpoint. */
+#define DR_CONTROL_SIZE 4
+
+/* Watchpoint/breakpoint read/write fields in DR7. */
+#define DR_RW_EXECUTE (0x0) /* Break on instruction execution. */
+#define DR_RW_WRITE (0x1) /* Break on data writes. */
+#define DR_RW_READ (0x3) /* Break on data reads or writes. */
+
+/* This is here for completeness. No platform supports this
+ functionality yet (as of March 2001). Note that the DE flag in the
+ CR4 register needs to be set to support this. */
+#ifndef DR_RW_IORW
+#define DR_RW_IORW (0x2) /* Break on I/O reads or writes. */
+#endif
+
+/* Watchpoint/breakpoint length fields in DR7. The 2-bit left shift
+ is so we could OR this with the read/write field defined above. */
+#define DR_LEN_1 (0x0 << 2) /* 1-byte region watch or breakpoint. */
+#define DR_LEN_2 (0x1 << 2) /* 2-byte region watch. */
+#define DR_LEN_4 (0x3 << 2) /* 4-byte region watch. */
+#define DR_LEN_8 (0x2 << 2) /* 8-byte region watch (AMD64). */
+
+/* Local and Global Enable flags in DR7.
+
+ When the Local Enable flag is set, the breakpoint/watchpoint is
+ enabled only for the current task; the processor automatically
+ clears this flag on every task switch. When the Global Enable flag
+ is set, the breakpoint/watchpoint is enabled for all tasks; the
+ processor never clears this flag.
+
+ Currently, all watchpoint are locally enabled. If you need to
+ enable them globally, read the comment which pertains to this in
+ i386_insert_aligned_watchpoint below. */
+#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit. */
+#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit. */
+#define DR_ENABLE_SIZE 2 /* Two enable bits per debug register. */
+
+/* Local and global exact breakpoint enable flags (a.k.a. slowdown
+ flags). These are only required on i386, to allow detection of the
+ exact instruction which caused a watchpoint to break; i486 and
+ later processors do that automatically. We set these flags for
+ backwards compatibility. */
+#define DR_LOCAL_SLOWDOWN (0x100)
+#define DR_GLOBAL_SLOWDOWN (0x200)
+
+/* Fields reserved by Intel. This includes the GD (General Detect
+ Enable) flag, which causes a debug exception to be generated when a
+ MOV instruction accesses one of the debug registers.
+
+ FIXME: My Intel manual says we should use 0xF800, not 0xFC00. */
+#define DR_CONTROL_RESERVED (0xFC00)
+
+/* Auxiliary helper macros. */
+
+/* A value that masks all fields in DR7 that are reserved by Intel. */
+#define I386_DR_CONTROL_MASK (~DR_CONTROL_RESERVED)
+
+/* The I'th debug register is vacant if its Local and Global Enable
+ bits are reset in the Debug Control register. */
+#define I386_DR_VACANT(state, i) \
+ (((state)->dr_control_mirror & (3 << (DR_ENABLE_SIZE * (i)))) == 0)
+
+/* Locally enable the break/watchpoint in the I'th debug register. */
+#define I386_DR_LOCAL_ENABLE(state, i) \
+ do { \
+ (state)->dr_control_mirror |= \
+ (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \
+ } while (0)
+
+/* Globally enable the break/watchpoint in the I'th debug register. */
+#define I386_DR_GLOBAL_ENABLE(state, i) \
+ do { \
+ (state)->dr_control_mirror |= \
+ (1 << (DR_GLOBAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \
+ } while (0)
+
+/* Disable the break/watchpoint in the I'th debug register. */
+#define I386_DR_DISABLE(state, i) \
+ do { \
+ (state)->dr_control_mirror &= \
+ ~(3 << (DR_ENABLE_SIZE * (i))); \
+ } while (0)
+
+/* Set in DR7 the RW and LEN fields for the I'th debug register. */
+#define I386_DR_SET_RW_LEN(state, i, rwlen) \
+ do { \
+ (state)->dr_control_mirror &= \
+ ~(0x0f << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \
+ (state)->dr_control_mirror |= \
+ ((rwlen) << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \
+ } while (0)
+
+/* Get from DR7 the RW and LEN fields for the I'th debug register. */
+#define I386_DR_GET_RW_LEN(dr7, i) \
+ (((dr7) \
+ >> (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))) & 0x0f)
+
+/* Did the watchpoint whose address is in the I'th register break? */
+#define I386_DR_WATCH_HIT(dr6, i) ((dr6) & (1 << (i)))
+
+/* Types of operations supported by i386_handle_nonaligned_watchpoint. */
+typedef enum { WP_INSERT, WP_REMOVE, WP_COUNT } i386_wp_op_t;
+
+/* Print debugging messages. */
+#ifndef GDBSERVER
+#define debug_printf(fmt, args...) \
+ fprintf_unfiltered (gdb_stdlog, fmt, ##args);
+#endif
+
+/* Print the values of the mirrored debug registers. */
+
+static void
+i386_show_dr (struct i386_debug_reg_state *state,
+ const char *func, CORE_ADDR addr,
+ int len, enum target_hw_bp_type type)
+{
+ int i;
+
+ debug_printf ("%s", func);
+ if (addr || len)
+ debug_printf (" (addr=%s, len=%d, type=%s)",
+ phex (addr, 8), len,
+ type == hw_write ? "data-write"
+ : (type == hw_read ? "data-read"
+ : (type == hw_access ? "data-read/write"
+ : (type == hw_execute ? "instruction-execute"
+ /* FIXME: if/when I/O read/write
+ watchpoints are supported, add them
+ here. */
+ : "??unknown??"))));
+ debug_printf (":\n");
+ debug_printf ("\tCONTROL (DR7): %s STATUS (DR6): %s\n",
+ phex (state->dr_control_mirror, 8),
+ phex (state->dr_status_mirror, 8));
+ ALL_DEBUG_REGISTERS (i)
+ {
+ debug_printf ("\
+\tDR%d: addr=0x%s, ref.count=%d DR%d: addr=0x%s, ref.count=%d\n",
+ i, phex (state->dr_mirror[i],
+ i386_get_debug_register_length ()),
+ state->dr_ref_count[i],
+ i + 1, phex (state->dr_mirror[i + 1],
+ i386_get_debug_register_length ()),
+ state->dr_ref_count[i + 1]);
+ i++;
+ }
+}
+
+/* Return the value of a 4-bit field for DR7 suitable for watching a
+ region of LEN bytes for accesses of type TYPE. LEN is assumed to
+ have the value of 1, 2, or 4. */
+
+static unsigned
+i386_length_and_rw_bits (int len, enum target_hw_bp_type type)
+{
+ unsigned rw;
+
+ switch (type)
+ {
+ case hw_execute:
+ rw = DR_RW_EXECUTE;
+ break;
+ case hw_write:
+ rw = DR_RW_WRITE;
+ break;
+ case hw_read:
+ internal_error (__FILE__, __LINE__,
+ _("The i386 doesn't support "
+ "data-read watchpoints.\n"));
+ case hw_access:
+ rw = DR_RW_READ;
+ break;
+#if 0
+ /* Not yet supported. */
+ case hw_io_access:
+ rw = DR_RW_IORW;
+ break;
+#endif
+ default:
+ internal_error (__FILE__, __LINE__, _("\
+Invalid hardware breakpoint type %d in i386_length_and_rw_bits.\n"),
+ (int) type);
+ }
+
+ switch (len)
+ {
+ case 1:
+ return (DR_LEN_1 | rw);
+ case 2:
+ return (DR_LEN_2 | rw);
+ case 4:
+ return (DR_LEN_4 | rw);
+ case 8:
+ if (TARGET_HAS_DR_LEN_8)
+ return (DR_LEN_8 | rw);
+ /* ELSE FALL THROUGH */
+ default:
+ internal_error (__FILE__, __LINE__, _("\
+Invalid hardware breakpoint length %d in i386_length_and_rw_bits.\n"), len);
+ }
+}
+
+/* Insert a watchpoint at address ADDR, which is assumed to be aligned
+ according to the length of the region to watch. LEN_RW_BITS is the
+ value of the bits from DR7 which describes the length and access
+ type of the region to be watched by this watchpoint. Return 0 on
+ success, -1 on failure. */
+
+static int
+i386_insert_aligned_watchpoint (struct i386_debug_reg_state *state,
+ CORE_ADDR addr, unsigned len_rw_bits)
+{
+ int i;
+
+ if (!i386_dr_low_can_set_addr () || !i386_dr_low_can_set_control ())
+ return -1;
+
+ /* First, look for an occupied debug register with the same address
+ and the same RW and LEN definitions. If we find one, we can
+ reuse it for this watchpoint as well (and save a register). */
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (!I386_DR_VACANT (state, i)
+ && state->dr_mirror[i] == addr
+ && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits)
+ {
+ state->dr_ref_count[i]++;
+ return 0;
+ }
+ }
+
+ /* Next, look for a vacant debug register. */
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (I386_DR_VACANT (state, i))
+ break;
+ }
+
+ /* No more debug registers! */
+ if (i >= DR_NADDR)
+ return -1;
+
+ /* Now set up the register I to watch our region. */
+
+ /* Record the info in our local mirrored array. */
+ state->dr_mirror[i] = addr;
+ state->dr_ref_count[i] = 1;
+ I386_DR_SET_RW_LEN (state, i, len_rw_bits);
+ /* Note: we only enable the watchpoint locally, i.e. in the current
+ task. Currently, no i386 target allows or supports global
+ watchpoints; however, if any target would want that in the
+ future, GDB should probably provide a command to control whether
+ to enable watchpoints globally or locally, and the code below
+ should use global or local enable and slow-down flags as
+ appropriate. */
+ I386_DR_LOCAL_ENABLE (state, i);
+ state->dr_control_mirror |= DR_LOCAL_SLOWDOWN;
+ state->dr_control_mirror &= I386_DR_CONTROL_MASK;
+
+ return 0;
+}
+
+/* Remove a watchpoint at address ADDR, which is assumed to be aligned
+ according to the length of the region to watch. LEN_RW_BITS is the
+ value of the bits from DR7 which describes the length and access
+ type of the region watched by this watchpoint. Return 0 on
+ success, -1 on failure. */
+
+static int
+i386_remove_aligned_watchpoint (struct i386_debug_reg_state *state,
+ CORE_ADDR addr, unsigned len_rw_bits)
+{
+ int i, retval = -1;
+
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (!I386_DR_VACANT (state, i)
+ && state->dr_mirror[i] == addr
+ && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits)
+ {
+ if (--state->dr_ref_count[i] == 0) /* No longer in use? */
+ {
+ /* Reset our mirror. */
+ state->dr_mirror[i] = 0;
+ I386_DR_DISABLE (state, i);
+ }
+ retval = 0;
+ }
+ }
+
+ return retval;
+}
+
+/* Insert or remove a (possibly non-aligned) watchpoint, or count the
+ number of debug registers required to watch a region at address
+ ADDR whose length is LEN for accesses of type TYPE. Return 0 on
+ successful insertion or removal, a positive number when queried
+ about the number of registers, or -1 on failure. If WHAT is not a
+ valid value, bombs through internal_error. */
+
+static int
+i386_handle_nonaligned_watchpoint (struct i386_debug_reg_state *state,
+ i386_wp_op_t what, CORE_ADDR addr, int len,
+ enum target_hw_bp_type type)
+{
+ int retval = 0;
+ int max_wp_len = TARGET_HAS_DR_LEN_8 ? 8 : 4;
+
+ static const int size_try_array[8][8] =
+ {
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* Trying size one. */
+ {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size two. */
+ {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size three. */
+ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size four. */
+ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size five. */
+ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size six. */
+ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size seven. */
+ {8, 1, 2, 1, 4, 1, 2, 1}, /* Trying size eight. */
+ };
+
+ while (len > 0)
+ {
+ int align = addr % max_wp_len;
+ /* Four (eight on AMD64) is the maximum length a debug register
+ can watch. */
+ int try = (len > max_wp_len ? (max_wp_len - 1) : len - 1);
+ int size = size_try_array[try][align];
+
+ if (what == WP_COUNT)
+ {
+ /* size_try_array[] is defined such that each iteration
+ through the loop is guaranteed to produce an address and a
+ size that can be watched with a single debug register.
+ Thus, for counting the registers required to watch a
+ region, we simply need to increment the count on each
+ iteration. */
+ retval++;
+ }
+ else
+ {
+ unsigned len_rw = i386_length_and_rw_bits (size, type);
+
+ if (what == WP_INSERT)
+ retval = i386_insert_aligned_watchpoint (state, addr, len_rw);
+ else if (what == WP_REMOVE)
+ retval = i386_remove_aligned_watchpoint (state, addr, len_rw);
+ else
+ internal_error (__FILE__, __LINE__, _("\
+Invalid value %d of operation in i386_handle_nonaligned_watchpoint.\n"),
+ (int) what);
+ if (retval)
+ break;
+ }
+
+ addr += size;
+ len -= size;
+ }
+
+ return retval;
+}
+
+/* Update the inferior debug registers state, in STATE, with the
+ new debug registers state, in NEW_STATE. */
+
+static void
+i386_update_inferior_debug_regs (struct i386_debug_reg_state *state,
+ struct i386_debug_reg_state *new_state)
+{
+ int i;
+
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (I386_DR_VACANT (new_state, i) != I386_DR_VACANT (state, i))
+ i386_dr_low_set_addr (new_state, i);
+ else
+ gdb_assert (new_state->dr_mirror[i] == state->dr_mirror[i]);
+ }
+
+ if (new_state->dr_control_mirror != state->dr_control_mirror)
+ i386_dr_low_set_control (new_state);
+
+ *state = *new_state;
+}
+
+/* Insert a watchpoint to watch a memory region which starts at
+ address ADDR and whose length is LEN bytes. Watch memory accesses
+ of the type TYPE. Return 0 on success, -1 on failure. */
+
+int
+i386_dr_insert_watchpoint (struct i386_debug_reg_state *state,
+ enum target_hw_bp_type type,
+ CORE_ADDR addr, int len)
+{
+ int retval;
+ /* Work on a local copy of the debug registers, and on success,
+ commit the change back to the inferior. */
+ struct i386_debug_reg_state local_state = *state;
+
+ if (type == hw_read)
+ return 1; /* unsupported */
+
+ if (((len != 1 && len != 2 && len != 4)
+ && !(TARGET_HAS_DR_LEN_8 && len == 8))
+ || addr % len != 0)
+ {
+ retval = i386_handle_nonaligned_watchpoint (&local_state,
+ WP_INSERT,
+ addr, len, type);
+ }
+ else
+ {
+ unsigned len_rw = i386_length_and_rw_bits (len, type);
+
+ retval = i386_insert_aligned_watchpoint (&local_state,
+ addr, len_rw);
+ }
+
+ if (retval == 0)
+ i386_update_inferior_debug_regs (state, &local_state);
+
+ if (debug_hw_points)
+ i386_show_dr (state, "insert_watchpoint", addr, len, type);
+
+ return retval;
+}
+
+/* Remove a watchpoint that watched the memory region which starts at
+ address ADDR, whose length is LEN bytes, and for accesses of the
+ type TYPE. Return 0 on success, -1 on failure. */
+
+int
+i386_dr_remove_watchpoint (struct i386_debug_reg_state *state,
+ enum target_hw_bp_type type,
+ CORE_ADDR addr, int len)
+{
+ int retval;
+ /* Work on a local copy of the debug registers, and on success,
+ commit the change back to the inferior. */
+ struct i386_debug_reg_state local_state = *state;
+
+ if (((len != 1 && len != 2 && len != 4)
+ && !(TARGET_HAS_DR_LEN_8 && len == 8))
+ || addr % len != 0)
+ {
+ retval = i386_handle_nonaligned_watchpoint (&local_state,
+ WP_REMOVE,
+ addr, len, type);
+ }
+ else
+ {
+ unsigned len_rw = i386_length_and_rw_bits (len, type);
+
+ retval = i386_remove_aligned_watchpoint (&local_state,
+ addr, len_rw);
+ }
+
+ if (retval == 0)
+ i386_update_inferior_debug_regs (state, &local_state);
+
+ if (debug_hw_points)
+ i386_show_dr (state, "remove_watchpoint", addr, len, type);
+
+ return retval;
+}
+
+/* Return non-zero if we can watch a memory region that starts at
+ address ADDR and whose length is LEN bytes. */
+
+int
+i386_dr_region_ok_for_watchpoint (struct i386_debug_reg_state *state,
+ CORE_ADDR addr, int len)
+{
+ int nregs;
+
+ /* Compute how many aligned watchpoints we would need to cover this
+ region. */
+ nregs = i386_handle_nonaligned_watchpoint (state, WP_COUNT,
+ addr, len, hw_write);
+ return nregs <= DR_NADDR ? 1 : 0;
+}
+
+/* If the inferior has some break/watchpoint that triggered, set the
+ address associated with that break/watchpoint and return non-zero.
+ Otherwise, return zero. */
+
+int
+i386_dr_stopped_data_address (struct i386_debug_reg_state *state,
+ CORE_ADDR *addr_p)
+{
+ CORE_ADDR addr = 0;
+ int i;
+ int rc = 0;
+ /* The current thread's DR_STATUS. We always need to read this to
+ check whether some watchpoint caused the trap. */
+ unsigned status;
+ /* We need DR_CONTROL as well, but only iff DR_STATUS indicates a
+ data breakpoint trap. Only fetch it when necessary, to avoid an
+ unnecessary extra syscall when no watchpoint triggered. */
+ int control_p = 0;
+ unsigned control = 0;
+
+ /* In non-stop/async, threads can be running while we change the
+ global dr_mirror (and friends). Say, we set a watchpoint, and
+ let threads resume. Now, say you delete the watchpoint, or
+ add/remove watchpoints such that dr_mirror changes while threads
+ are running. On targets that support non-stop,
+ inserting/deleting watchpoints updates the global dr_mirror only.
+ It does not update the real thread's debug registers; that's only
+ done prior to resume. Instead, if threads are running when the
+ mirror changes, a temporary and transparent stop on all threads
+ is forced so they can get their copy of the debug registers
+ updated on re-resume. Now, say, a thread hit a watchpoint before
+ having been updated with the new dr_mirror contents, and we
+ haven't yet handled the corresponding SIGTRAP. If we trusted
+ dr_mirror below, we'd mistake the real trapped address (from the
+ last time we had updated debug registers in the thread) with
+ whatever was currently in dr_mirror. So to fix this, dr_mirror
+ always represents intention, what we _want_ threads to have in
+ debug registers. To get at the address and cause of the trap, we
+ need to read the state the thread still has in its debug
+ registers.
+
+ In sum, always get the current debug register values the current
+ thread has, instead of trusting the global mirror. If the thread
+ was running when we last changed watchpoints, the mirror no
+ longer represents what was set in this thread's debug
+ registers. */
+ status = i386_dr_low_get_status ();
+
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (!I386_DR_WATCH_HIT (status, i))
+ continue;
+
+ if (!control_p)
+ {
+ control = i386_dr_low_get_control ();
+ control_p = 1;
+ }
+
+ /* This second condition makes sure DRi is set up for a data
+ watchpoint, not a hardware breakpoint. The reason is that
+ GDB doesn't call the target_stopped_data_address method
+ except for data watchpoints. In other words, I'm being
+ paranoiac. */
+ if (I386_DR_GET_RW_LEN (control, i) != 0)
+ {
+ addr = i386_dr_low_get_addr (i);
+ rc = 1;
+ if (debug_hw_points)
+ i386_show_dr (state, "watchpoint_hit", addr, -1, hw_write);
+ }
+ }
+
+ if (debug_hw_points && addr == 0)
+ i386_show_dr (state, "stopped_data_addr", 0, 0, hw_write);
+
+ if (rc)
+ *addr_p = addr;
+ return rc;
+}
+
+/* Return non-zero if the inferior has some watchpoint that triggered.
+ Otherwise return zero. */
+
+int
+i386_dr_stopped_by_watchpoint (struct i386_debug_reg_state *state)
+{
+ CORE_ADDR addr = 0;
+ return i386_dr_stopped_data_address (state, &addr);
+}
--
1.7.1