This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[PATCH v2 11/17] introduce relative_filename and use it
- From: Tom Tromey <tromey at redhat dot com>
- To: gdb-patches at sourceware dot org
- Cc: Tom Tromey <tromey at redhat dot com>
- Date: Fri, 18 Oct 2013 14:49:28 -0600
- Subject: [PATCH v2 11/17] introduce relative_filename and use it
- Authentication-results: sourceware.org; auth=none
- References: <1382129374-18344-1-git-send-email-tromey at redhat dot com>
This introduces a new relative_filename proc to gdb.exp and changes
some tests to use it. This helps make these tests parallel-safe.
* gdb.base/fullname.exp: Use standard_output_file,
relative_filename.
* gdb.base/hashline1.exp: Use standard_testfile,
standard_output_file, relative_filename, clean_restart.
* gdb.base/hashline2.exp: Use standard_testfile,
standard_output_file, relative_filename.
* gdb.base/hashline3.exp: Use standard_testfile,
standard_output_file, relative_filename.
* lib/gdb.exp (relative_filename): New proc.
---
gdb/testsuite/gdb.base/fullname.exp | 5 +++--
gdb/testsuite/gdb.base/hashline1.exp | 21 +++++++++------------
gdb/testsuite/gdb.base/hashline2.exp | 13 ++++++-------
gdb/testsuite/gdb.base/hashline3.exp | 14 +++++++-------
gdb/testsuite/lib/gdb.exp | 15 +++++++++++++++
5 files changed, 40 insertions(+), 28 deletions(-)
diff --git a/gdb/testsuite/gdb.base/fullname.exp b/gdb/testsuite/gdb.base/fullname.exp
index 32f6ea4..2754f59 100644
--- a/gdb/testsuite/gdb.base/fullname.exp
+++ b/gdb/testsuite/gdb.base/fullname.exp
@@ -70,7 +70,8 @@ if { [gdb_breakpoint [standard_output_file tmp-${srcfile}]:${line} {no-message}]
}
# Build the test executable using a relative path.
-if { [gdb_compile "${subdir}/tmp-${srcfile}" "${binfile}" executable {debug}] != "" } {
+if { [gdb_compile [relative_filename [pwd] [standard_output_file tmp-${srcfile}]] \
+ "${binfile}" executable {debug}] != "" } {
return -1
}
@@ -99,7 +100,7 @@ if { [gdb_breakpoint [standard_output_file tmp-${srcfile}]:${line} {no-message}]
# we'll run GDB from.
set save_pwd [pwd]
-cd ${subdir}
+cd [standard_output_file {}]
if { [gdb_compile [standard_output_file tmp-${srcfile}] "${testfile}" \
executable {debug}] != "" } {
cd $save_pwd
diff --git a/gdb/testsuite/gdb.base/hashline1.exp b/gdb/testsuite/gdb.base/hashline1.exp
index 950d67e..2330daf 100644
--- a/gdb/testsuite/gdb.base/hashline1.exp
+++ b/gdb/testsuite/gdb.base/hashline1.exp
@@ -21,28 +21,25 @@
# srcfile is in objdir because we need to machine generate it in order
# to get the correct path in the #line directive.
-set testfile "hashline1"
-set srcfile "${testfile}.c"
-set binfile "${objdir}/${subdir}/${testfile}"
+standard_testfile .c
-set fd [open ${objdir}/${subdir}/${srcfile} w]
-puts $fd "#line 2 \"[pwd]/${subdir}/${srcfile}\""
+set new_srcfile [standard_output_file $srcfile]
+set fd [open $new_srcfile w]
+puts $fd "#line 2 \"$new_srcfile\""
puts $fd "int main () { return 0; } /* set breakpoint here */"
close $fd
# The choice of path name for the source file is important in order to trigger
-# the bug. Using ${objdir}/${subdir}/${srcfile} here won't trigger the bug.
-if { [gdb_compile "./${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+# the bug. Using $new_srcfile here won't trigger the bug.
+set compile_name [relative_filename $objdir $new_srcfile]
+if { [gdb_compile $compile_name "${binfile}" executable {debug}] != "" } {
untested hashline1.exp
return -1
}
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
+clean_restart ${binfile}
-set bp_location [gdb_get_line_number "set breakpoint here" ${objdir}/${subdir}/${srcfile}]
+set bp_location [gdb_get_line_number "set breakpoint here" $new_srcfile]
# Try to set a breakpoint on the specified file location.
diff --git a/gdb/testsuite/gdb.base/hashline2.exp b/gdb/testsuite/gdb.base/hashline2.exp
index d7ee4a7..cd748ca 100644
--- a/gdb/testsuite/gdb.base/hashline2.exp
+++ b/gdb/testsuite/gdb.base/hashline2.exp
@@ -21,16 +21,15 @@
# srcfile is in objdir because we need to machine generate it in order
# to get the correct path in the #line directive.
-set testfile "hashline2"
-set srcfile "${testfile}.c"
-set binfile "${objdir}/${subdir}/${testfile}"
+standard_testfile .c
-set fd [open ${objdir}/${subdir}/${srcfile} w]
-puts $fd "#line 2 \"///[pwd]/${subdir}/${srcfile}\""
+set new_srcfile [standard_output_file $srcfile]
+set fd [open $new_srcfile w]
+puts $fd "#line 2 \"///${new_srcfile}\""
puts $fd "int main () { return 0; } /* set breakpoint here */"
close $fd
-if { [gdb_compile "${objdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+if { [gdb_compile $new_srcfile "${binfile}" executable {debug}] != "" } {
untested hashline2.exp
return -1
}
@@ -40,7 +39,7 @@ gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
-set bp_location [gdb_get_line_number "set breakpoint here" ${objdir}/${subdir}/${srcfile}]
+set bp_location [gdb_get_line_number "set breakpoint here" ${new_srcfile}]
# Try to set a breakpoint on the specified file location.
diff --git a/gdb/testsuite/gdb.base/hashline3.exp b/gdb/testsuite/gdb.base/hashline3.exp
index 2496b3c..eba5f77 100644
--- a/gdb/testsuite/gdb.base/hashline3.exp
+++ b/gdb/testsuite/gdb.base/hashline3.exp
@@ -21,16 +21,16 @@
# srcfile is in objdir because we need to machine generate it in order
# to get the correct path in the #line directive.
-set testfile "hashline3"
-set srcfile "${testfile}.c"
-set binfile "${objdir}/${subdir}/${testfile}"
+standard_testfile
-set fd [open ${objdir}/${subdir}/${srcfile} w]
-puts $fd "#line 2 \"./${subdir}/${srcfile}\""
+set new_srcfile [standard_output_file $srcfile]
+set fd [open $new_srcfile w]
+set relative [relative_filename $objdir $new_srcfile]
+puts $fd "#line 2 \"./$relative\""
puts $fd "int main () { return 0; } /* set breakpoint here */"
close $fd
-if { [gdb_compile "${objdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+if { [gdb_compile $new_srcfile "${binfile}" executable {debug}] != "" } {
untested hashline3.exp
return -1
}
@@ -40,7 +40,7 @@ gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
-set bp_location [gdb_get_line_number "set breakpoint here" ${objdir}/${subdir}/${srcfile}]
+set bp_location [gdb_get_line_number "set breakpoint here" $new_srcfile]
# Try to set a breakpoint on the specified file location.
diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp
index fbb9f71..a1c18b7 100644
--- a/gdb/testsuite/lib/gdb.exp
+++ b/gdb/testsuite/lib/gdb.exp
@@ -4320,6 +4320,21 @@ proc set_remotetimeout { timeout } {
}
}
+# ROOT and FULL are file names. Returns the relative path from ROOT
+# to FULL. Note that FULL must be in a subdirectory of ROOT.
+# For example, given ROOT = /usr/bin and FULL = /usr/bin/ls, this
+# will return "ls".
+
+proc relative_filename {root full} {
+ if {[string compare [string range $full 0 \
+ [expr {[string length $root] - 1}]] $root] != 0} {
+ error "$full not a subdir of $root"
+ }
+
+ set len [llength [file split $root]]
+ return [eval file join [lrange [file split $full] $len end]]
+}
+
# Log gdb command line and script if requested.
if {[info exists TRANSCRIPT]} {
rename send_gdb real_send_gdb
--
1.8.1.4