This is the mail archive of the gdb-patches@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[PATCH V7 7/8] Add MPX registers tests.


2013-06-25  Walfred Tedeschi  <walfred.tedeschi@intel.com>

	* common/i386-gcc-cpuid.h (bit_MPX): Synchronize with gcc file.
testsuite/
	* gdb.arch/i386-mpx.c: New file
	* gdb.arch/i386-mpx.exp: New file.

---
 gdb/common/i386-gcc-cpuid.h         |    8 +-
 gdb/testsuite/gdb.arch/i386-mpx.c   |   92 +++++++++++++++++++++++
 gdb/testsuite/gdb.arch/i386-mpx.exp |  142 +++++++++++++++++++++++++++++++++++
 3 files changed, 241 insertions(+), 1 deletion(-)
 create mode 100644 gdb/testsuite/gdb.arch/i386-mpx.c
 create mode 100644 gdb/testsuite/gdb.arch/i386-mpx.exp

diff --git a/gdb/common/i386-gcc-cpuid.h b/gdb/common/i386-gcc-cpuid.h
index e045ba8..dafb21c 100644
--- a/gdb/common/i386-gcc-cpuid.h
+++ b/gdb/common/i386-gcc-cpuid.h
@@ -75,8 +75,14 @@
 #define bit_AVX2	(1 << 5)
 #define bit_BMI2	(1 << 8)
 #define bit_RTM	(1 << 11)
+#define bit_AVX512F	(1 << 16)
+#define bit_MPX (1 << 14)
 #define bit_RDSEED	(1 << 18)
 #define bit_ADX	(1 << 19)
+#define bit_AVX512PF	(1 << 26)
+#define bit_AVX512ER	(1 << 27)
+#define bit_AVX512CD	(1 << 28)
+#define bit_SHA		(1 << 29)
 
 /* Extended State Enumeration Sub-leaf (%eax == 13, %ecx == 1) */
 #define bit_XSAVEOPT	(1 << 0)
@@ -207,7 +213,7 @@ __get_cpuid_max (unsigned int __ext, unsigned int *__sig)
 {
   unsigned int __eax, __ebx, __ecx, __edx;
 
-#ifdef __i386__
+#ifndef __x86_64__
   /* See if we can use cpuid.  On AMD64 we always can.  */
 #if __GNUC__ >= 3
   __asm__ ("pushf{l|d}\n\t"
diff --git a/gdb/testsuite/gdb.arch/i386-mpx.c b/gdb/testsuite/gdb.arch/i386-mpx.c
new file mode 100644
index 0000000..db7cb3b
--- /dev/null
+++ b/gdb/testsuite/gdb.arch/i386-mpx.c
@@ -0,0 +1,92 @@
+/* Test program for MPX registers.
+
+   Copyright 2013 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include <stdio.h>
+#include "i386-cpuid.h"
+
+#ifndef NOINLINE
+#define NOINLINE __attribute__ ((noinline))
+#endif
+
+unsigned int have_mpx (void) NOINLINE;
+
+unsigned int NOINLINE
+have_mpx (void)
+{
+  unsigned int eax, ebx, ecx, edx;
+
+  if (!__get_cpuid (1, &eax, &ebx, &ecx, &edx))
+    return 0;
+
+  if ((ecx & bit_OSXSAVE) == bit_OSXSAVE)
+     {
+       if (__get_cpuid_max (0, NULL) < 7)
+         return 0;
+
+       __cpuid_count (7, 0, eax, ebx, ecx, edx);
+
+       if ((ebx & bit_MPX) == bit_MPX)
+	 return 1;
+       else
+	 return 0;
+     }
+}
+
+int
+main (int argc, char **argv)
+{
+  if (have_mpx ())
+    {
+#ifdef __x86_64__
+      asm ("mov $10, %rax\n\t"
+	  "mov $9, %rdx\n\t"
+	  "bndmk (%rax,%rdx), %bnd0\n\t"
+	  "mov $20, %rax\n\t"
+	  "mov $9, %rdx\n\t"
+	  "bndmk (%rax,%rdx), %bnd1\n\t"
+	  "mov $30, %rax\n\t"
+	  "mov $9, %rdx\n\t"
+	  "bndmk (%rax,%rdx), %bnd2\n\t"
+	  "mov $40, %rax\n\t"
+	  "mov $9, %rdx\n\t"
+	  "bndmk (%rax,%rdx), %bnd3\n\t"
+	  "bndstx %bnd3, (%rax) \n\t"
+	  "nop\n\t"
+         );
+#else
+      asm ("mov $10, %eax\n\t"
+	   "mov $9, %edx\n\t"
+	   "bndmk (%eax,%edx), %bnd0\n\t"
+	   "mov $20, %eax\n\t"
+	   "mov $9, %edx\n\t"
+	   "bndmk (%eax,%edx), %bnd1\n\t"
+	   "mov $30, %eax\n\t"
+	   "mov $9, %edx\n\t"
+	   "bndmk (%eax,%edx), %bnd2\n\t"
+	   "mov $40, %eax\n\t"
+	   "mov $9, %edx\n\t"
+	   "bndmk (%eax,%edx), %bnd3\n\t"
+	   "bndstx  %bnd3, (%eax)\n\t"
+	   "nop\n\t"
+	  );
+#endif
+	asm ("nop\n\t");	/* break here.  */
+    }
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.arch/i386-mpx.exp b/gdb/testsuite/gdb.arch/i386-mpx.exp
new file mode 100644
index 0000000..ff1c2eb
--- /dev/null
+++ b/gdb/testsuite/gdb.arch/i386-mpx.exp
@@ -0,0 +1,142 @@
+# Copyright 2013 Free Software Foundation, Inc.
+#
+# Contributed by Intel Corp. <walfred.tedeschi@intel.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+if { ![istarget i?86-*-*] && ![istarget x86_64-*-* ] } {
+    verbose "Skipping x86 MPX tests."
+    return
+}
+
+standard_testfile
+
+set comp_flags "-fmpx -I${srcdir}/../common"
+
+if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile} \
+ [list debug nowarnings additional_flags=${comp_flags}]] } {
+    return -1
+}
+
+if ![runto_main] {
+    untested "could not run to main"
+    return -1
+}
+
+send_gdb "print have_mpx ()\r"
+gdb_expect {
+    -re ".. = 1\r\n$gdb_prompt " {
+        pass "check whether processor supports MPX"
+    }
+    -re ".. = 0\r\n$gdb_prompt " {
+        verbose "processor does not support MPX; skipping MPX tests"
+        return
+    }
+    -re ".*$gdb_prompt $" {
+        fail "check whether processor supports MPX"
+    }
+    timeout {
+        fail "check whether processor supports MPX (timeout)"
+    }
+}
+
+# Test bndcfg register and bndstatus at startup
+set test_string "\\\{raw = 0x\[0-9a-f\]+, config = \\\{base = \[0-9\]+,\
+reserved = \[0-9\]+, preserved = \[0-9\]+, enabled = \[0-9\]+\\\}\\\}"
+
+gdb_test "print \$bndcfgu" $test_string "bndcfgu formating"
+gdb_test "print \$bndcfgu.config.enabled" "= 1" "test if bndstatus is enabled"
+gdb_test "print \$bndstatus" "\\\{raw = 0x0, status = \\\{bde = 0, error = 0\\\}\\\}" \
+		"bndstatus formating"
+gdb_test "print \$bndstatus.raw" "= \\\(void \\\*\\\) 0x0" "bndstatus is zero by startup"
+
+# Read values from pseudo registers.
+gdb_breakpoint [ gdb_get_line_number "break here" ]
+gdb_continue_to_breakpoint "break here" ".*break here.*"
+
+set test_string ".*\\\{lbound = 0xa, ubound = 0x13\\\}.*"
+gdb_test "info register bnd0" ".*bnd0$test_string" "Pure bnd0 register"
+
+set test_string ".*\\\{lbound = 0x14, ubound = 0x1d\\\}.*"
+gdb_test "info register bnd1" ".*bnd1$test_string" "Pure bnd1 register"
+
+set test_string ".*\\\{lbound = 0x1e, ubound = 0x27\\\}.*"
+gdb_test "info register bnd2" ".*bnd2$test_string" "Pure bnd2 register"
+
+set test_string ".*\\\{lbound = 0x28, ubound = 0x31\\\}.*"
+gdb_test "info register bnd3" ".*bnd3$test_string" "Pure bnd3 register"
+
+# Read value from registers bndrs.
+
+set test_string ".*\\\{lbound = 0xa, ubound_raw = 0x\[f\]+ec\\\}.*"
+gdb_test "info register bnd0raw" ".*bnd0$test_string" "Pure bnd0r register"
+
+set test_string ".*\\\{lbound = 0x14, ubound_raw = 0x\[f\]+e2\\\}.*"
+gdb_test "info register bnd1raw" ".*bnd1$test_string" "Pure bnd1r register"
+
+set test_string ".*\\\{lbound = 0x1e, ubound_raw = 0x\[f\]+d8\\\}.*"
+gdb_test "info register bnd2raw" ".*bnd2$test_string" "Pure bnd2r register"
+
+set test_string ".*\\\{lbound = 0x28, ubound_raw = 0x\[f\]+ce\\\}.*"
+gdb_test "info register bnd3raw" ".*bnd3$test_string" "Pure bnd3r register"
+
+# Setting fields on bnds
+set test_string ".*\\\{lbound = 0xa, ubound = 0x400\\\}.*"
+gdb_test "print \$bnd0.ubound = 0x400" "= \\\(void \\\*\\\) 0x400" "set value for bnd0.ubound"
+gdb_test "print  \$bnd0" "$test_string" "after setting bnd0.ubound"
+set test_string ".*\\\{lbound = 0xa, ubound_raw = 0x\[f\]+bff\\\}.*"
+gdb_test "print /x \$bnd0raw" "$test_string" "bnd0raw after set bnd0.ubound"
+
+set test_string ".*\\\{lbound = 0x1, ubound = 0x400\\\}.*"
+gdb_test "print \$bnd0.lbound = 0x1" "= \\\(void \\\*\\\) 0x1" "set value for bnd0.lbound"
+gdb_test "print  \$bnd0" "$test_string" "after setting bnd0.lbound"
+set test_string ".*\\\{lbound = 0x1, ubound_raw = 0x\[f\]+bff\\\}.*"
+gdb_test "print /x \$bnd0raw" "$test_string" "bnd0raw after set bnd0.lbound"
+
+# Setting fields on bnd0raw.
+set test_string ".*\\\{lbound = 0x1, ubound_raw = 0x600\\\}.*"
+gdb_test "print /x \$bnd0raw.ubound_raw = 0x600" "= 0x600" "set value for bnd0raw.ubound"
+gdb_test "print /x \$bnd0raw" "$test_string" "bnd0raw after setting bnd0raw.ubound"
+set test_string ".*\\\{lbound = 0x1, ubound = 0x\[f\]+9ff\\\}.*"
+gdb_test "print /x \$bnd0" "$test_string" "bnd0 after set bnd0raw.ubound"
+
+set test_string ".*\\\{lbound = 0x100, ubound_raw = 0x600\\\}.*"
+gdb_test "print /x \$bnd0raw.lbound = 0x100" "= 0x100" "set value for bnd0raw.lbound"
+gdb_test "print /x \$bnd0raw" "$test_string" "bnd0raw after setting bnd0raw.lbound"
+set test_string ".*\\\{lbound = 0x100, ubound = 0x\[f\]+9ff\\\}.*"
+gdb_test "print /x \$bnd0" "$test_string" "bnd0 after set bnd0raw.lbound"
+
+# Set full value bnd raw
+set test_string ".*\\\{lbound = 0x10, ubound_raw = 0x\[f\]+cff\\\}.*"
+gdb_test "print /x \$bnd0raw = {0x10, ~0x300}" "$test_string" "set full value for bnd0raw"
+set test_string ".*\\\{lbound = 0x10, ubound = 0x300\\\}.*"
+gdb_test "print /x \$bnd0" "$test_string" "bnd0raw after setting full bnd0raw"
+
+# Set full value bnd
+set test_string ".*\\\{lbound = 0x10, ubound = 0x300\\\}.*"
+gdb_test "print /x \$bnd0 = {0x10, 0x300}" "$test_string" "set full value for bnd0"
+set test_string ".*\\\{lbound = 0x10, ubound_raw = 0x\[f\]+cff\\\}.*"
+gdb_test "print /x \$bnd0raw" "$test_string" "bnd0raw after setting full bnd0"
+
+# Test bndcfg register and bndstatus after a failure on bndstr
+gdb_test "print \$bndstatus.status.error" "= 2" "bndstatus error is 2\
+after a failure on allocating an entry"
+
+# Going to test the python extension for lenght.
+if { [skip_python_tests] } { continue }
+# Verify if size is right
+set test_string ".*\\\: size 17.*"
+gdb_test "print /x \$bnd0 = {0x10, 0x20}" "$test_string" "verify size for bnd0"
+
+send_gdb "quit\n"
-- 
1.7.10.4


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]