mi_gdb_test MESSAGE parameter

[Bob Rossi <bob at brasko dot net>]

Hi,

Here is a pre-patch to my previous testsuite patch. I think it makes a
lot of sense to make the MESSAGE parameter to mi_gdb_test necessary.
There was only 1 testcase not using the MESSAGE parameter, and it was
using it 1/2 the time.

Thanks,
Bob Rossi

2005-08-1   Bob Rossi  <bob@brasko.net>
        * gdb.mi/mi-syn-frame.exp, gdb.mi/mi2-syn-frame.exp: Add MESSAGE
        parameter to mi_gdb_test.
        * lib/mi-support.exp (mi_gdb_test): Make MESSAGE parameter necessary.

Index: gdb/testsuite/gdb.mi/mi-syn-frame.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.mi/mi-syn-frame.exp,v
retrieving revision 1.4
diff -u -r1.4 mi-syn-frame.exp
--- gdb/testsuite/gdb.mi/mi-syn-frame.exp	13 Jun 2005 02:41:51 -0000	1.4
+++ gdb/testsuite/gdb.mi/mi-syn-frame.exp	1 Aug 2005 18:24:24 -0000
@@ -44,7 +44,9 @@
 mi_gdb_load ${binfile}
 mi_run_to_main
 
-mi_gdb_test "400-break-insert foo" "400\\^done,bkpt=\{number=\"2\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"foo\",file=\".*mi-syn-frame.c\",line=\"$decimal\",times=\"0\"\}"
+mi_gdb_test "400-break-insert foo" \
+"400\\^done,bkpt=\{number=\"2\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"foo\",file=\".*mi-syn-frame.c\",line=\"$decimal\",times=\"0\"\}" \
+"insert breakpoint foo"
 
 
 #
@@ -69,21 +71,29 @@
   }
 }
 
-mi_gdb_test "404-stack-list-frames 0 0" "404\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]"
+mi_gdb_test "404-stack-list-frames 0 0" \
+"404\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]" \
+"list stack frames"
 
 
 #
 # Call have_a_very_merry_interrupt() which will eventually raise a signal
 # that's caught by handler() which calls subroutine().
 
-mi_gdb_test "405-break-insert subroutine" "405\\^done,bkpt=\{number=\"3\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"subroutine\",file=\".*mi-syn-frame.c\",line=\"$decimal\",times=\"0\"\}"
-
-mi_gdb_test "406-data-evaluate-expression have_a_very_merry_interrupt()" "Waiting to get a signal\[\r\n\]+\\&\"The program being debugged stopped while in a function called from GDB.\\\\n\"\[\r\n\]+\\&\"When the function \\(have_a_very_merry_interrupt\\) is done executing, GDB will silently\\\\n\"\[\r\n\]+\\&\"stop \\(instead of continuing to evaluate the expression containing\\\\n\"\[\r\n\]+\\&\"the function call\\).\\\\n\"\[\r\n\]+406\\^error,msg=\"The program being debugged stopped while in a function called from GDB.\\\\nWhen the function \\(have_a_very_merry_interrupt\\) is done executing, GDB will silently\\\\nstop \\(instead of continuing to evaluate the expression containing\\\\nthe function call\\).\""
+mi_gdb_test "405-break-insert subroutine" \
+"405\\^done,bkpt=\{number=\"3\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"subroutine\",file=\".*mi-syn-frame.c\",line=\"$decimal\",times=\"0\"\}" \
+"insert breakpoint subroutine"
+
+mi_gdb_test "406-data-evaluate-expression have_a_very_merry_interrupt()" \
+"Waiting to get a signal\[\r\n\]+\\&\"The program being debugged stopped while in a function called from GDB.\\\\n\"\[\r\n\]+\\&\"When the function \\(have_a_very_merry_interrupt\\) is done executing, GDB will silently\\\\n\"\[\r\n\]+\\&\"stop \\(instead of continuing to evaluate the expression containing\\\\n\"\[\r\n\]+\\&\"the function call\\).\\\\n\"\[\r\n\]+406\\^error,msg=\"The program being debugged stopped while in a function called from GDB.\\\\nWhen the function \\(have_a_very_merry_interrupt\\) is done executing, GDB will silently\\\\nstop \\(instead of continuing to evaluate the expression containing\\\\nthe function call\\).\"" \
+"evaluate expression have_a_very_merry_interrupt"
 
 # We should have both a signal handler and a call dummy frame
 # in this next output.
 
-mi_gdb_test "407-stack-list-frames" "407\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"subroutine\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\},frame=\{level=\"1\",addr=\"$hex\",func=\"handler\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\},frame=\{level=\"2\",addr=\"$hex\",func=\"<signal handler called>\"\},.*frame=\{level=\"$decimal\",addr=\"$hex\",func=\"have_a_very_merry_interrupt\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\},frame=\{level=\"$decimal\",addr=\"$hex\",func=\"<function called from gdb>\"\},frame=\{level=\"$decimal\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]"
+mi_gdb_test "407-stack-list-frames" \
+"407\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"subroutine\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\},frame=\{level=\"1\",addr=\"$hex\",func=\"handler\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\},frame=\{level=\"2\",addr=\"$hex\",func=\"<signal handler called>\"\},.*frame=\{level=\"$decimal\",addr=\"$hex\",func=\"have_a_very_merry_interrupt\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\},frame=\{level=\"$decimal\",addr=\"$hex\",func=\"<function called from gdb>\"\},frame=\{level=\"$decimal\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]" \
+"list stack frames"
 
 
 send_gdb "408-exec-continue\n"
@@ -96,7 +106,9 @@
   }
 }
 
-mi_gdb_test "409-stack-list-frames 0 0" "409\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]"
+mi_gdb_test "409-stack-list-frames 0 0" \
+"409\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]" \
+"list stack frames"
 
 #
 # Call bar() by hand, which should get an exception while running.
Index: gdb/testsuite/gdb.mi/mi2-syn-frame.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.mi/mi2-syn-frame.exp,v
retrieving revision 1.3
diff -u -r1.3 mi2-syn-frame.exp
--- gdb/testsuite/gdb.mi/mi2-syn-frame.exp	13 Jun 2005 02:41:51 -0000	1.3
+++ gdb/testsuite/gdb.mi/mi2-syn-frame.exp	1 Aug 2005 18:24:24 -0000
@@ -45,7 +45,9 @@
 mi_gdb_load ${binfile}
 mi_run_to_main
 
-mi_gdb_test "400-break-insert foo" "400\\^done,bkpt=\{number=\"2\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"foo\",file=\".*mi-syn-frame.c\",line=\"$decimal\",times=\"0\"\}"
+mi_gdb_test "400-break-insert foo" \
+"400\\^done,bkpt=\{number=\"2\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"foo\",file=\".*mi-syn-frame.c\",line=\"$decimal\",times=\"0\"\}" \
+"insert breakpoint foo"
 
 
 #
@@ -70,21 +72,29 @@
   }
 }
 
-mi_gdb_test "404-stack-list-frames 0 0" "404\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]"
+mi_gdb_test "404-stack-list-frames 0 0" \
+"404\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]" \
+"list stack frames"
 
 
 #
 # Call have_a_very_merry_interrupt() which will eventually raise a signal
 # that's caught by handler() which calls subroutine().
 
-mi_gdb_test "405-break-insert subroutine" "405\\^done,bkpt=\{number=\"3\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"subroutine\",file=\".*mi-syn-frame.c\",line=\"$decimal\",times=\"0\"\}"
-
-mi_gdb_test "406-data-evaluate-expression have_a_very_merry_interrupt()" "Waiting to get a signal\[\r\n\]+\\&\"The program being debugged stopped while in a function called from GDB.\\\\n\"\[\r\n\]+\\&\"When the function \\(have_a_very_merry_interrupt\\) is done executing, GDB will silently\\\\n\"\[\r\n\]+\\&\"stop \\(instead of continuing to evaluate the expression containing\\\\n\"\[\r\n\]+\\&\"the function call\\).\\\\n\"\[\r\n\]+406\\^error,msg=\"The program being debugged stopped while in a function called from GDB.\\\\nWhen the function \\(have_a_very_merry_interrupt\\) is done executing, GDB will silently\\\\nstop \\(instead of continuing to evaluate the expression containing\\\\nthe function call\\).\""
+mi_gdb_test "405-break-insert subroutine" \
+"405\\^done,bkpt=\{number=\"3\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"subroutine\",file=\".*mi-syn-frame.c\",line=\"$decimal\",times=\"0\"\}" \
+"insert breakpoint subroutine"
+
+mi_gdb_test "406-data-evaluate-expression have_a_very_merry_interrupt()" \
+"Waiting to get a signal\[\r\n\]+\\&\"The program being debugged stopped while in a function called from GDB.\\\\n\"\[\r\n\]+\\&\"When the function \\(have_a_very_merry_interrupt\\) is done executing, GDB will silently\\\\n\"\[\r\n\]+\\&\"stop \\(instead of continuing to evaluate the expression containing\\\\n\"\[\r\n\]+\\&\"the function call\\).\\\\n\"\[\r\n\]+406\\^error,msg=\"The program being debugged stopped while in a function called from GDB.\\\\nWhen the function \\(have_a_very_merry_interrupt\\) is done executing, GDB will silently\\\\nstop \\(instead of continuing to evaluate the expression containing\\\\nthe function call\\).\"" \
+"evaluate expression have_a_very_merry_interrupt"
 
 # We should have both a signal handler and a call dummy frame
 # in this next output.
 
-mi_gdb_test "407-stack-list-frames" "407\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"subroutine\",file=\".*mi-syn-frame.c\",line=\"$decimal\"\},frame=\{level=\"1\",addr=\"$hex\",func=\"handler\",file=\".*mi-syn-frame.c\",line=\"$decimal\"\},frame=\{level=\"2\",addr=\"$hex\",func=\"<signal handler called>\"\},.*frame=\{level=\"$decimal\",addr=\"$hex\",func=\"have_a_very_merry_interrupt\",file=\".*mi-syn-frame.c\",line=\"$decimal\"\},frame=\{level=\"$decimal\",addr=\"$hex\",func=\"<function called from gdb>\"\},frame=\{level=\"$decimal\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",line=\"$decimal\"\}.*\\\]"
+mi_gdb_test "407-stack-list-frames" \
+"407\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"subroutine\",file=\".*mi-syn-frame.c\",line=\"$decimal\"\},frame=\{level=\"1\",addr=\"$hex\",func=\"handler\",file=\".*mi-syn-frame.c\",line=\"$decimal\"\},frame=\{level=\"2\",addr=\"$hex\",func=\"<signal handler called>\"\},.*frame=\{level=\"$decimal\",addr=\"$hex\",func=\"have_a_very_merry_interrupt\",file=\".*mi-syn-frame.c\",line=\"$decimal\"\},frame=\{level=\"$decimal\",addr=\"$hex\",func=\"<function called from gdb>\"\},frame=\{level=\"$decimal\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",line=\"$decimal\"\}.*\\\]" \
+"list stack frames"
 
 
 send_gdb "408-exec-continue\n"
@@ -97,7 +107,9 @@
   }
 }
 
-mi_gdb_test "409-stack-list-frames 0 0" "409\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]"
+mi_gdb_test "409-stack-list-frames 0 0" \
+"409\\^done,stack=\\\[frame=\{level=\"0\",addr=\"$hex\",func=\"main\",file=\".*mi-syn-frame.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$decimal\"\}.*\\\]" \
+"list stack frames"
 
 #
 # Call bar() by hand, which should get an exception while running.
Index: gdb/testsuite/lib/mi-support.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/lib/mi-support.exp,v
retrieving revision 1.27
diff -u -r1.27 mi-support.exp
--- gdb/testsuite/lib/mi-support.exp	18 May 2005 03:41:59 -0000	1.27
+++ gdb/testsuite/lib/mi-support.exp	1 Aug 2005 18:24:24 -0000
@@ -517,10 +517,9 @@
 #   this is the null string no command is sent.
 # PATTERN is the pattern to match for a PASS, and must NOT include
 #   the \r\n sequence immediately before the gdb prompt.
-# MESSAGE is an optional message to be printed.  If this is
-#   omitted, then the pass/fail messages use the command string as the
-#   message.  (If this is the empty string, then sometimes we don't
-#   call pass or fail at all; I don't understand this at all.)
+# MESSAGE is the message to be printed.  (If this is the empty string, 
+#   then sometimes we don't call pass or fail at all; I don't 
+#   understand this at all.)
 #
 # Returns:
 #    1 if the test failed,
@@ -533,13 +532,9 @@
     global GDB expect_out
     upvar timeout timeout
 
-    if [llength $args]>2 then {
-	set message [lindex $args 2]
-    } else {
-	set message [lindex $args 0]
-    }
     set command [lindex $args 0]
     set pattern [lindex $args 1]
+    set message [lindex $args 2]
 
     if [llength $args]==5 {
 	set question_string [lindex $args 3];