This is the mail archive of the ecos-patches@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[Bug 1001291] New HAL for Cortex-M3 Smartfusion device


Please do not reply to this email. Use the web interface provided at:
http://bugs.ecos.sourceware.org/show_bug.cgi?id=1001291

--- Comment #24 from Ilija Kocho <ilijak@siva.com.mk> 2011-11-14 22:31:31 GMT ---
(In reply to comment #22)
> Correct, CYGNUM_HAL_KERNEL_COUNTERS_CLOCK_ISR_DEFAULT_PRIORITY is not set to
> the lowest priority, i can fix that.
> 
> For debugging the smartfusion kit, there are several alternatives. Out of the
> box, without additional HW, the USB interface as described in all
> smartfusion tutorials is used. This method requires the tools provided by Actel
> (SoftConsole IDE (Eclipse), Actel flashpro driver and ARM GDB and 
> Sprite utilities from CodeSourcery). This default debugging setup requires a
> special ROM startup type where the FLASH load address is set to 0x60000000 and 
> the virtual address is set to 0x00000000. Since I also wanted to keep regular
> ROM startup type for developer using the JTAG interface, I have introduced the
> CDL
>  CYG_HAL_PLF_STARTUP. Both ROM_SOFTCONSOLE and ROM type leads to use
> CYG_HAL_STARTUP=ROM, which is required by the architectural HAL.

OK, So, although construction resembles, you were solving different problem. I
think with little tweaking it is possible to score both goals.

> 
> Christophe

-- 
Configure bugmail: http://bugs.ecos.sourceware.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]