This is the mail archive of the ecos-patches@sourceware.org mailing list for the eCos project.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
These patches mostly contain modifications needed to run eCos on Atmel AT91SAM7SE. There were many extra space characters at the end of the lines and my editor stripped them, so I ignored whitespace differences for diffing. * HAL: I added SAM7SE PIO, PMC, EBI definitions, macros for accessing PWM channels with index, definitions for chips with second embedded flash controller (AT91SAM7__512). * flash: Support for AT91SAM7SE. Partial support for chips with second embedded flash controller (recognize chip and ability to write the first controller). Support for detecting correct flash size for chips with both ROM and flash (like SAM7SE, the flash size is contained in the second NVM size register because the first contains ROM size). * USB: Support for SAM7SE (has internal pullup), SAM7X. The extra endpoints have definitions everywhere in the sources, but I haven't included an option in the CDL to enable devtab entries these for endpoints. There is an issue if the larger FIFO (64 instead of 8) for endpoint 0 in AT91SAM7SE is enabled, see this thread: http://ecos.sourceware.org/ml/ecos-discuss/2008-10/msg00151.html Not enabling the 64 byte size FIFO is a temporary solution (but enough for control endpoints), I will fix it later. * USB Serial: Added an option to select whether the device is self powered or bus powered, and an option to change reported current consumption. Regards: Gábor Török
Attachment:
hal_arm_at91.patch
Description: Binary data
Attachment:
devs_flash_arm_at91.patch
Description: Binary data
Attachment:
devs_usb_at91.patch
Description: Binary data
Attachment:
io_usb_serial_slave.patch
Description: Binary data
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |