This is the mail archive of the
ecos-patches@sources.redhat.com
mailing list for the eCos project.
Re: New port for ARM Industrial Module AIM 711 ( 2 ) - Checked by AntiV
- From: Roland Caßebohm <roland dot cassebohm at VisionSystems dot de>
- To: Andrew Lunn <andrew at lunn dot ch>
- Cc: Andrew Lunn <andrew at lunn dot ch>, ecos-patches at ecos dot sourceware dot org
- Date: Thu, 13 May 2004 12:38:14 +0200
- Subject: Re: New port for ARM Industrial Module AIM 711 ( 2 ) - Checked by AntiV
- References: <200404291559.49435.roland.cassebohm@visionsystems.de> <200405131212.51422.roland.cassebohm@visionsystems.de> <20040513102307.GK25516@lunn.ch>
Am Donnerstag, 13. Mai 2004 12:23 schrieb Andrew Lunn:
> On Thu, May 13, 2004 at 12:12:51PM +0200, Roland Ca?ebohm
wrote:
> > Am Donnerstag, 13. Mai 2004 10:41 schrieb Andrew Lunn:
> > > On Thu, Apr 29, 2004 at 03:59:49PM +0200, Roland
> > > Ca?ebohm
> >
> > wrote:
> > > > Hi,
> > > >
> > > > this is the improved port for the ARM Industrial
> > > > Module AIM 711 from Vision Systems GmbH.
> > >
> > > Hi Roland.
> > >
> > > This looks much better. But now i've run into a
> > > compiler problem. Did you build a custom compiler for
> > > this? The standard eCosCentric compiler blows up
> > > since it appears the compiler libraries are little
> > > endian only where as you a compiling for big endian.
> >
> > Hi Andrew,
> >
> > yes you we have compiled the toolchain to get the
> > big-endian libraries. It is the same problem as with
> > the SNDS100 port which is also big-endian.
>
> This should be documented somewhere. A README in the in
> HAL docs directory would be good.
>
> Do you provide your customers with a binary distribution
> of the toolchain? Or just instructions on how to compile
> it?
Til now we provide a binary distribution, but we want to
write a short instruction how to compile the arm-elf
toolchain with big-endian support.
You are right the best would be to include these
instructions in the README file. Or better I write a link
to http://ecos.sourceware.org/build-toolchain.html which
provides the instructions.
Roland
--
___________________________________________________
VS Vision Systems GmbH, Industrial Image Processing
Dipl.-Ing. Roland Caßebohm
Aspelohe 27A, D-22848 Norderstedt, Germany
Mail: roland.cassebohm@visionsystems.de
http://www.visionsystems.de
___________________________________________________