This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
1G speed was added recently. Example attached. Christophe -----Original Message----- From: ecos-discuss-owner@ecos.sourceware.org [mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Mikhail Matusov Sent: 25. juni 2010 22:56 To: ecos-discuss@ecos.sourceware.org Subject: [ECOS] Ethernet PHY Device API Hello all, According to the documentation one must provide a stat() function as a part of any Ethernet PHY API. It is supposed to return a status bitmap indicating the state of the physical connection. However, the bits defined in eth_phy.h for this bitmap are very limited, not even 1G speed is defined. Also, it seems that the stat() function is not actually used anywhere... Can someone please clarify what should I be doing for a 1G PHY? Thanks, /Mikhail -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
Attachment:
tsec.c
Description: tsec.c
-- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |