This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Re: Question about RedBoot Networking


Hi, Sergei,

Thanks a lot for your reply. I feel very excited that I am connected
to the big eCos family. :-)

I am using eCos 3.0 with "i386 PC Target (vmWare)".

Yes, you are right, the "CYGPKG_IO_ETH_DRIVERS" is missing. From the
ecc file, I can see the following lines

# Redboot Networking
# This option includes networking support in RedBoot.
#
cdl_component CYGPKG_REDBOOT_NETWORKING {
    # This option is not active
    # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
    #     CYGPKG_IO_ETH_DRIVERS (unknown) == 0
    #   --> 0

Any idea why the lines related to "CYGPKG_IO_ETH_DRIVERS" is commented
out? I am doing development on a Lin64 RedHat 4 machine.

Thanks a lot!
Jingzhao

On Sat, Jun 19, 2010 at 1:43 AM, Sergei Gavrikov
<sergei.gavrikov@gmail.com> wrote:
> On Fri, 18 Jun 2010, Jingzhao wrote:
>>
>> Hi, all,
>>
>> I am new to RedBoot and eCos. I was able to compile RedBoot and
>> download it to a VMWare machine. Nice output from the console.
>
> Hi Jingzhao,
>
> What target do you use?
>
>> However,?I don't know how to enable networking for RedBoot.?I don't
>> see any information from the RedBoot output what IP address it uses.
>> The "ip_address" command is not there.
>
> You have to add 'CYGPKG_IO_ETH_DRIVERS' eCos package. That package
> provides a generic, platform-independent Ethernet I/O.
>
>> When I looked the eCos configuration for RedBoot, the "RedBoot
>> Networking" is grayed out. I cannot even specify a static IP address
>> as the field is disabled.
>>
>> Can any one give me a hand?
>
> With added package above you will get 'RedBoot Networking' enabled, but,
> that won't be mean that you will get networking on your target (your
> target must have H/W Ethernet device drivers something like
>
> ? ?CYGPKG_DEVS_ETH_YOURNIC
> ? ?CYGPKG_DEVS_ETH_ARCH_TARGET
>
> ).
>
> Well, in such a case (if your target has not NIC) RedBoot will say about
> an absent NIC on its start
>
> ? ?+No network interfaces found
>
> HTH
>
> Sergei

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]