This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Change output message destination
- From: Stefano Mora <smora at eos dot pr dot it>
- To: "'ecos-discuss at ecos dot sourceware dot org'" <ecos-discuss at ecos dot sourceware dot org>
- Date: Fri, 26 Mar 2010 13:38:04 +0100
- Subject: [ECOS] Change output message destination
Hi all,
is there a way to move (or turn off) the starting output messages from serail port to other port?
It is also good to change the 'terminal channel' ... maybe some magic compile option to achieve this ?
Best should be a quite start until ^C: if it received, all the output should be enabled ...
I'm developing on a iMX25 and on the serial port I have a printer that echoes some characters and stops the bootstrap.
If I unplug the RX wire there is not problem, then i think about some kind of echo.
Thanks
________________________________
Ing. Stefano Mora
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss