This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Timer 5 channel 3 is not working in ecos
Hi,
I am using stm32 microcontroller
Gary Thomas wrote:
>
> gaurang wrote:
>> Hi,
>> I configure timer 5 and all channels for pwm output and gpio A as
>> an
>> alter function push-pull.
>> I am getting pwm output on timer 5 and channel 1,2 and 4,but i am not
>> getting pwm out on gpio A pin 2 and this pin is working good when i use
>> general purpose output.
>> Anyone help for why do me not get pwm output on port A pin 2 in ecos?
>>
>
> What platform?
>
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
>
>
--
View this message in context: http://www.nabble.com/Timer-5-channel-3-is-not-working-in-ecos-tp22848250p22849208.html
Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss