This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
On Tue, Sep 09, 2008 at 03:30:44PM +0200, Robert Brusa wrote:Hi I am "booting" a AT91SAM7X-based board. Previously, with the eval-board, diag_printf went to the debug serial interface. The new board does not use this interface, instead I would like to assign UART1 to diag_printf. I digged into the documentation, but could find now solution to my problem. Thanks for an advice.
Take a look at CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL. You probably need to set the value to 1.
Andrew
Yes, that did it! Thank you and nice evening. Robert
-- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |