This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: redirecting diag_printf - output


On Tue, Sep 09, 2008 at 03:30:44PM +0200, Robert Brusa wrote:
> Hi
> I am "booting" a AT91SAM7X-based board. Previously, with the eval-board,  
> diag_printf went to the debug serial interface. The new board does not 
> use this interface, instead I would like to assign UART1 to diag_printf. 
> I digged into the documentation, but could find now solution to my 
> problem. Thanks for an advice.

Take a look at CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL. You probably
need to set the value to 1.

     Andrew

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]