This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
How do I enable UART1 "/dev/ser1" on SAM7X-EK?
- From: "stephan" <stephan at greenbyte dot co dot za>
- To: <ecos-discuss at ecos dot sourceware dot org>
- Date: Wed, 20 Feb 2008 18:43:30 +0200
- Subject: [ECOS] How do I enable UART1 "/dev/ser1" on SAM7X-EK?
Hi
I use eCosPro 2.0.67.
How do I enable UART1 ("/dev/ser1") on the SAM7X-EK platform?
>From the eCos configuration tool, under "Serial Device Drivers", I can't
select "Atmel AT91 serial port 1 driver" - the checkbox is disabled.
I (obviously then) get an error from:
ErrorLookup = cyg_io_lookup( "/dev/ser1", &serial_hanle );
Under eCos HAL, I've changed "Number of Communication Channels" to 3, I've
also tried to use "/dev/tty1", with no avail?
I appreciate your help.
Regards
Stephan Pienaar
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss