This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Problem reading broadcast IP
I thank you for your answer. For your information, here are what I tested :
srv_recept.sin_addr.s_addr=inet_addr("255.255.255.255"); --> OK,
Broadcast received
srv_recept.sin_addr.s_addr=inet_addr("192.255.255.255"); --> Doesn't
receive any Broadcast
srv_recept.sin_addr.s_addr=inet_addr("192.168.255.255"); --> Doesn't
receive any Broadcast
srv_recept.sin_addr.s_addr=inet_addr("192.168.1.255"); --> Doesn't
receive any Broadcast
It seems to be strange because when I do that on a PC, it works fine,
and then I expected that it will work on eCos too.
2008/1/18, Andrew Lunn <andrew@lunn.ch>:
> On Fri, Jan 18, 2008 at 10:49:59AM +0100, Emmanuel Coullien wrote:
> > Ok for binding broadcast adress but how do you specify the interface
> > (ex: eth0) ?
>
> Take for example:
>
> eth0 Link encap:Ethernet HWaddr 00:60:97:b0:86:6e
> inet addr:192.168.9.3 Bcast:192.168.9.255 Mask:255.255.255.0
>
> The IP broadcast address is 192.168.9.255. Try binding to that. Only
> one interface will have this address, so it implicitly specifies eth0.
>
> In my limited experience, getting broadcasting to work in a portable
> way is a bit of a black art.
>
> Andrew
>
--
Emmanuel Coullien
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss