This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
ecos application problem
- From: "albert prasetyo" <prasetyoalbert at gmail dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Thu, 23 Aug 2007 19:28:29 +0800
- Subject: [ECOS] ecos application problem
Hi everyone;
I am a newbie in redboot and ecos. Currently I am developing redboot
for AT91RM9200 board (ARM9). I am able to develop redboot (RAM)
version for this board but unable to run the application (app.srec).
Source code of app.srec:
#include <stdio.h>
int main(void)
{
printf("1\n");
return 0;
}
This is the message generated by redboot:
RedBoot> load -m y
CCEntry point: 0x21000040, address range: 0x21000000-0x210086c4
xyzModem - CRC mode, 2(SOH)/102(STX)/0(CAN) packets, 4 retries
RedBoot> go
$O310A#24
It somehow managed to print '1' but in ASCII mode. I don't know where
my configuration goes wrong.
Any help is much appreciated.
Thanks in advance;
Albert P
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss