This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Difference between "go" on Script and manual enter?


Hi,

Gary wrote,
So, if you are actually connected to channel #1, when you run the
script, I/O will be going to channel #0, thus you don't see it!  If
you type commands instead, the eCos I/O will properly go to channel #1.

Yes ! Since I couldn't make RedBoot output to HyperTerminal using channel 0, I used channel 1 in load command like, load -v -m ymodem -c 1

I added "channel 1" before "go" in Script,then worked beautifully.

Thank you,Gary, you saved my life!

Masahiro Ariga


-- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]