This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
RE: standalone Redboot configuration
- From: "Jacob Avraham" <jacob at imagine-com dot com>
- To: "Gary Thomas" <gary at mlbassoc dot com>
- Cc: <ecos-discuss at ecos dot sourceware dot org>
- Date: Thu, 3 May 2007 15:19:08 +0300
- Subject: RE: [ECOS] standalone Redboot configuration
> -----Original Message-----
> From: Gary Thomas [mailto:gary@mlbassoc.com]
> Sent: Thursday, May 03, 2007 2:07 PM
> To: Jacob Avraham
> Cc: ecos-discuss@ecos.sourceware.org
> Subject: Re: [ECOS] standalone Redboot configuration
>
> Jacob Avraham wrote:
> > Hi,
> >
> > I'd like to run a standalone configuration of Redboot out of RAM,
using
> > a BDI debugger
> > to download it to memory. I tried redboot_RAM, but after some
> > instructions it trapped
> > into debug mode.
> > Is redboot_RAM capable of running standalone, or does it rely on
> > pre-existing setup
> > That perhaps redboot_ROM is doing?
> > How should I configure redboot to run standalone out of RAM?
>
> What's the platform? Most targets can run RedBoot from RAM,
> but some (in particular most ARM targets) cannot without some
> massaging.
>
The target is IXDP425
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss