This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
+DB: (FeatureScan) NpeDl did not provide the image ID for NPE port 2
- From: thierry <thierry dot langlais at efixo dot com>
- To: ecos-discuss at sourceware dot org
- Date: Fri, 29 Sep 2006 10:09:19 +0200
- Subject: [ECOS] +DB: (FeatureScan) NpeDl did not provide the image ID for NPE port 2
Hi all,
At Reset, Redboot prints me:
+DB: (FeatureScan) NpeDl did not provide the image ID for NPE port 2
Does someone know what it means ?
I would like to know what's the problem and how it could be fixed. Thanks
Thierry Langlais.
Here are traces about kernel ixp400 modules at loading time:
ixp400_eth: ixp0 is using NPEB and the PHY at address 1
ixp400_eth: ixp1 is using NPEC and the PHY at address 0
ixp400_eth: ixp2 is using NPEA and the PHY at address 2
ixp400_eth: Use default MAC address 00:02:b3:01:01:01 for port 0
ixp400_eth: Use default MAC address 00:02:b3:02:02:02 for port 1
ixp400_eth: Use default MAC address 00:02:b3:03:03:03 for port 2
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss