This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Filesystem for Flash support on eCOS
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Venkata Ramana Kaza <venkataramana dot kaza at gmail dot com>
- Cc: eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
- Date: Tue, 11 Jul 2006 09:36:52 -0600
- Subject: Re: [ECOS] Filesystem for Flash support on eCOS
- References: <6748f840607110733h1a97c7f4s68542adb1d2a35b0@mail.gmail.com> <44B3BBA8.6030105@mlbassoc.com> <6748f840607110822y6ebd0185h86602d5aee0225f4@mail.gmail.com>
Please keep replies on the list so that all may benefit - private
email support is available only under contract.
Venkata Ramana Kaza wrote:
Hi Gary,
Thanks for the Info.
Can that be also used by the applications running in eCOS?
Yes, using the Virtual Vector interfaces eCos applications can
access FIS images.
That said, for anything more complicated than [very] simple access,
I would suggest using JFFS2 which is a full-featured file system
that can be used by both eCos programs and RedBoot [and Linux as
well]
Regards
-venkat
On 7/11/06, Gary Thomas <gary@mlbassoc.com> wrote:
Venkata Ramana Kaza wrote:
> Hi All,
> We are just starting to use eCOS for our eval. board. We wanted to
> use the Flash for storing the eCOS application images. For the same,
> wanted to know about the Filesystem support for Flash on eCOS.? Can
> anybody give some pointers on the same.
Look at the "FLASH Image System" component of RedBoot
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss