This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Support for Arcom's Vulcan board
- From: Andrew Lunn <andrew at lunn dot ch>
- To: R Vamshi Krishna <vamshi at cse dot iitb dot ac dot in>
- Cc: ecos-discuss at ecos dot sourceware dot org
- Date: Thu, 2 Feb 2006 11:24:11 +0100
- Subject: Re: [ECOS] Support for Arcom's Vulcan board
- References: <Pine.LNX.4.61.0602021529030.30381@mars.cse.iitb.ac.in>
On Thu, Feb 02, 2006 at 03:32:35PM +0530, R Vamshi Krishna wrote:
>
> Our project requires a board with atleast 4 serial ports.
> While googling I found out about Arcom's IXP425 based PC/104 compatible
> board. Does eCos support this board. I don't need to use all the features
> of the board. All I want to know is that is it possible to use the board
> with eCos in any way ??
http://www.arcom.com/#Devkits
This shows that the MERLIN board is fully supported and there must be
basic support for the VIPER since RedBoot runs.
There is no mention of the Vulcon, so it looks like you would need to
do a port.
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss