This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Interrupt unmask before complete cs8900a interrupt configuration.
On Wed, 2006-01-11 at 13:34 +0100, Andrew Lunn wrote:
> On Wed, Jan 11, 2006 at 05:15:28AM -0700, Gary Thomas wrote:
> > On Wed, 2006-01-11 at 13:05 +0100, Andrew Lunn wrote:
> > > On Wed, Jan 11, 2006 at 11:48:36AM +0100, Jaws wrote:
> > > > If redboot stops the ethernet chip when lauch the application,
> > > > I don't understand why before the cs8900a_start, when unmask the interrupt,
> > > > it is active! The redboot is the current CVS version.
> > >
> > > The current code to stop the driver is:
> > >
> > > static void
> > > cs8900a_stop(struct eth_drv_sc *sc)
> > > {
> > > cs8900a_priv_data_t *cpd = (cs8900a_priv_data_t *)sc->driver_private;
> > > cyg_addrword_t base = cpd->base;
> > >
> > > put_reg(base, PP_LineCTL, 0);
> > > }
> > >
> > > Is this enough to really stop the chip?
> >
> > It's enough to stop the chip from "talking".
>
> Does it stop the device from "listening"?
Yes - it matters little though since this device is programmed I/O
only (no DMA running wild, per your Linux bootup scenario...)
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss