This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
RE: MPC564 PORT
- From: Rycerz Roman-G11565 <roman dot rycerz at motorola dot com>
- To: Azkarate_Askasua Mikel <MAzkarateAskasua at ikerlan dot es>, ecos-discuss at sources dot redhat dot com
- Date: Wed, 9 Nov 2005 10:01:51 -0600
- Subject: RE: [ECOS] MPC564 PORT
If this is what is referred to as a "Power Oak" I believe it should.... The only differences
In the OAK family of chips from Freescale is the amount of memory (Flash and Ram) and bus width
And number of IO's
Roman F. Rycerz
Engr Section Mgr
PED Test & Tools
Motorola
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org [mailto:ecos-discuss-owner@ecos.sourceware.org]
Sent: Wednesday, November 09, 2005 9:52 AM
To: ecos-discuss@sources.redhat.com
Subject: [ECOS] MPC564 PORT
Hi everybody,
I know that there is an eCOS port to Axiom's CME-0555 evaluation board.
-I would like to know if this port works on Axiom's CME-564.
-And if the aswer is no, what solution could I take? It would be easy to do our own port?
Thanks a lot in advance,
Mikel A-A.
_______________________________________________________________________
Mikel Azkarate-askasua
Electronics area
IKERLAN
Pº J. M. Arizmendiarrieta, 2
20500 Arrasate-Mondragón (Gipuzkoa)
Tel.: +34 943 71 24 00 Fax: +34 943 79 69 44
E-mail: mazkarateaskasua@ikerlan.es http: www.ikerlan.es
IK4 Research Alliance
_______________________________________________________________________
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss