This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: problem while executing RAM based Redboot with Go command
- From: Andrew Lunn <andrew at lunn dot ch>
- To: Nagendra G <nagendrag at LNTEBG dot com>
- Cc: ecos-discuss at ecos dot sourceware dot org
- Date: Thu, 3 Nov 2005 16:08:40 +0100
- Subject: Re: [ECOS] problem while executing RAM based Redboot with Go command
- References: <s36a6413.096@EBGMAIL>
On Thu, Nov 03, 2005 at 07:10:02PM +0530, Nagendra G wrote:
>
>
> Hello,
>
> I am facing problem with Go Command.Please help in solving this.
>
> I have created RAM and ROM based Redboot .Now i am loading RAM based redboot that is redboot .bin into target using serial console using
>
> Load -r -m xmodem -b 0x8c0069a0
>
> This works fine and RAM location is correct.
> But With Go command ,garbage values are coming in serial console.
Is the redboot image linked to run at address 0x8c0069a0?
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss