This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: GDB Problem
- From: Henry Yu <henry at sigpro dot com>
- To: Andrew Lunn <andrew at lunn dot ch>
- Cc: ecos-discuss at ecos dot sourceware dot org, steven at sigpro dot com
- Date: Mon, 31 Oct 2005 21:58:12 -0800 (PST)
- Subject: Re: [ECOS] GDB Problem
- Reply-to: henry at sigpro dot com
Andrew
Thank you so much for taking the time to reply me, follow you direction, I use serial port to connect boards, in gdb mode I type:
"(gdb) set remotebaud 115200"
"(gdb) target remote com1"
but some error show me:
"Remote debugging using com1"
"couldn't establish connection to remote target"
"cannot access memory at address 0xcca7cd2a"
Please give me a hand!
Thank you!
Henry,
Sincerely
--- Andrew Lunn <andrew@lunn.ch> wrote:
From: Andrew Lunn <andrew@lunn.ch>
Date: Mon, 31 Oct 2005 06:36:47 +0100
To: Henry Yu <henry@sigpro.com>
Cc: ecos-discuss@ecos.sourceware.org
Subject: Re: [ECOS] GDB Problem
On Sun, Oct 30, 2005 at 06:48:25PM -0800, Henry Yu wrote:
> Hello,
> Now I porting RedBoot from Mips 4kc to TI's TNETV 1060, I
> can see "RedBoot>". When I type "fconfig -l" it list:
>
> RedBoot> fconfig -l
> Run script at boot: false
> Console baud rate: 38400
> RedBoot>
>
> How Can I get GDB support?
http://ecos.sourceware.org/docs-latest/user-guide/using-commandline-testcase.html
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss