Re: [ECOS] [ixdp425/RedBoot] How to start eCos binary?

[Karel Gardas <kgardas at objectsecurity dot com>]

On Mon, 8 Aug 2005, Mark Salter wrote:

> On Mon, 2005-08-08 at 20:28 +0200, Karel Gardas wrote:
> > Hello,
> >
> > I do have linksys NSLU2, which is basically Intel's ixdp425 striped down
> > platform. I've bought this to experiment with embedded programming and
> > eCos. Now I have final binary which works great when started from Insight
> > debugger or directly from arm-elf-gdb connected to NSLU2, but I'm not able
> > to load and start this binary while using board's RedBoot.
> >
> > The start in gdb looks:
> >
> > $ arm-elf-gdb /tftpboot/hello.xs
>
> So hello.xs is and ELF file...

Yes.

> > RedBoot> load -v -r -b 0x80000 -h 192.168.0.2 hello.xs
>
> But here you are loading hello.xs as if it were a raw binary file.
> Try loading like this:
>
>  RedBoot> load -v -h 192.168.0.2 hello.xs

Thanks! This really work!

Karel
--
Karel Gardas                  kgardas@objectsecurity.com
ObjectSecurity Ltd.           http://www.objectsecurity.com

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss