This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: "Fis init" failed on EB40A

From: Jani Monoses <jani at iv dot ro>
To: ecos-discuss at sources dot redhat dot com
Date: Wed, 27 Jul 2005 14:17:48 +0300
Subject: [ECOS] Re: "Fis init" failed on EB40A
References: <C03A3C267DDF184EA523BBAB577BF92405B170@blrexsr1.slti.sanyo.co.in> <20050727071621.GD15048@lunn.ch> <001d01c59299$a2962e50$2101a8c0@emea.cisco.com>

RedBoot>
RedBoot> fis init
About to initialize [format] FLASH image system - are you sure (y/n)? y
*** Initialize FLASH Image System
    Warning: device contents not erased, some blocks may not be usable
... Erase from 0x011f0000-0x01200000: $T0a0f:80018001;0d:e43d0000;#7b

and I have to reset the board.
Any suggestions?


I wonder if it could be the flash bug mentioned in atmel erratas.
Is CYGHWR_DEVS_FLASH_ATMEL_AT49XXXX_ERASE_BUG_WORKAROUND set
in the at49 flash driver cdl?
Jani


--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Follow-Ups:
- Re: Re: "Fis init" failed on EB40A
  - From: Domenico La Fauci

References:
- RE: which gcc toolchain to use ?
  - From: Harsha D
- Re: which gcc toolchain to use ?
  - From: Andrew Lunn
- "Fis init" failed on EB40A
  - From: Jaws

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]