This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

"Fis init" failed on EB40A


Hi all,
    I have some problem with flash and fis commands.
I' using the EB40A with the redboot versio

RedBoot> version

RedBoot(tm) bootstrap and debug environment [ROM]
SRI release, ATMEL bootstrap v2.20 - built 11:05:22, Mar  6 2002

Platform: Atmel AT91/EB40 (AT91R40807 ARM7TDMI)
Copyright (C) 2000, 2001, Red Hat, Inc.

RAM: 0x00000000-0x00040000, 0x00009b98-0x0002f000 available
FLASH: 0x01000000 - 0x01200000, 32 blocks of 0x00010000 bytes each.
RedBoot>

when I tried to make the command "fis init' this is the result:

RedBoot>
RedBoot> fis init
About to initialize [format] FLASH image system - are you sure (y/n)? y
*** Initialize FLASH Image System
    Warning: device contents not erased, some blocks may not be usable
... Erase from 0x011f0000-0x01200000: $T0a0f:80018001;0d:e43d0000;#7b

and I have to reset the board.
Any suggestions?

Thanks in advance
Jaws

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]