This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Redboot problem with EBD9312 - help
hi !
I also had this problem with my ep9315.
it has something to do with cirrus stores or wants to store the mac on SPI
eeprom, and i think its not realy working. never looked deeper ...
I didn't solve it because our custom board does not have a SPI eprom, like
cirrus eval board have. on my custom board I solved it with deleting the
section and added my custom settings ...
regards manfred
Am Freitag, 18. März 2005 13:43 schrieb Mukund JB.:
> Dear all,
>
> Sorry, the attachment missed.
> I am working on the new EBD9312 boards we got today.
> I have downloaded the redboot.bin successfully; I hooked the network
> cable.
>
> When we start the board for the first time after installation of redboot
> we get the following message just before the redboot prompt:-
>
> +Flash configuration checksum error or invalid key
> EP93xx - no EEPROM, static ESA, or Redboot config option.
> No network interfaces found
>
> The board is in the network having access to the DHCP server. The IP
> address is also not assigned at this point of time. After I tried to
> assign static IP address using the "fconfig -i" command, The IP address
> says
>
> #ip_address
> IP:0.0.0.0/255.255.255.0, Gateway: 0.0.0.0
> Default server: 0.0.0.0, DNS server IP: 0.0.0.0
>
> Pinging to the HOST also failed.
>
> I tried reinstalling the redboot.bin file onto the device.
> I have generated minicom.cap file this time which is attached to this
> mail when configuring redboot. Please see the attached file for more
> information.
>
> Would you please guide me what could be the problem? I am struck here, I
> cannot go any where it this is solved. How would I solve this?
>
>
> Regards,
> Mukund jampala
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss