This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Debug terminal port selection
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Tzahi <tzahi at terasync dot net>
- Cc: eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
- Date: Thu, 02 Dec 2004 04:52:19 -0700
- Subject: Re: [ECOS] Debug terminal port selection
- Organization: MLB Associates
- References: <NAEKIFLKIECBDLJBOHJLCEGHCJAA.tzahi@terasync.net>
On Thu, 2004-12-02 at 04:52, Tzahi wrote:
> Hi all
> I'm using A&M's AdderII (MPC852T) board.
> I've seen that the selection of the debug port (SMC1 or SCC3) is dependent
> of user inputs durng startup.
> Does anyone know how can I inactivate this option so the debug port
> (printf's) would always be SMC1?
You'll need to rebuild & install RedBoot with the option
CYGPKG_REDBOOT_ANY_CONSOLE
turned off.
--
Gary Thomas <gary@mlbassoc.com>
MLB Associates
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss