This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Question about cyg_pci_translate_interrupt
- From: David Brennan <eCos at brennanhome dot com>
- To: eCos Discuss <ecos-discuss at sources dot redhat dot com>
- Date: Wed, 06 Oct 2004 19:29:51 -0700
- Subject: [ECOS] Question about cyg_pci_translate_interrupt
Is this function allowed to be called multiple times? I have a
particular device for which the driver is broken into two modules. Each
uses the standard pci probe and print logic from the pci1 test file. The
interrupt routine gets attached by the second module. However, when I
got the latest CVS, the device now reports to the second module that it
does not generate interrupts. I assume the problem was introduced with
this change
(http://sources.redhat.com/ml/ecos-patches/2004-08/msg00080.html). And I
can re-write my code (basically not check the interrupt vector in the
first module) to work. But wanted to make sure that was a desired effect
of the change. The problem may also be my specific device, in which case
it make perfect sense for me to solve it on my end.
Thanks
David Brennan
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss