This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Problems with cyg_io_read
- From: Amanda Heyward <amanda_heyward at yahoo dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Cc: Andrew Lunn <andrew at lunn dot ch>
- Date: Thu, 19 Aug 2004 14:16:49 -0700 (PDT)
- Subject: Re: [ECOS] Problems with cyg_io_read
Thanks again Andrew. I'm using the /dev/ser1 to open
and read. thats beacause I'm using the ttyS0 for GDB.
Should I have to set some buffer limit somewhere.
Thanks.
Amanda.
--- Andrew Lunn <andrew@lunn.ch> wrote:
> On Thu, Aug 19, 2004 at 10:25:16AM -0700, Amanda
> Heyward wrote:
> > Thanks Andrew. I'm looking at my graphical config
> tool
> > and I don't see any option for the full driver. AI
> had
> > enabled the hal/diag driver under TTY Mode Serial
> > Device Drivers, but disabling it doesn't seem to
> make
> > any difference though. Other than this I have
> enabled
> > the Hardware Serial Drivers for /dev/ser1.
> > I also looked in the Build->packages tree, but
> > couldn't locate any full driver.
> > Can you please help me.
>
> I don't use the GUI tool, but the hardware serial
> driver sounds right.
>
> Which device are you opening and doing the read
> from?
>
> Andrew
>
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss