This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: connect eCos to RedBoot
- From: Nick Garnett <nickg at ecoscentric dot com>
- To: Muna Hummady <muna_hummady at yahoo dot com>
- Cc: ecos-discuss at sources dot redhat dot com, amassa at san dot rr dot com
- Date: 29 Jul 2004 16:35:37 +0100
- Subject: Re: [ECOS] connect eCos to RedBoot
- References: <20040729151130.90338.qmail@web53701.mail.yahoo.com>
Muna Hummady <muna_hummady@yahoo.com> writes:
> hello freinds
> 1- Could you tell me how to talk to RedBoot via the
> serial line using HyperTerminal?
Just follow the instructions in the HyperTerminal documentation. If you
can set up Insight to talk to the board then you should be able to
get HyperTerminal going. When you reset the board you should see the
RedBoot startup message and prompt appear.
> 2- you didn't tell me why when i'm running continue on
> the host, it goes on endless loop?
Cannot help you there I'm afraid. I repeat: try running some of the
test programs.
--
Nick Garnett eCos Kernel Architect
http://www.ecoscentric.com/ The eCos and RedBoot experts
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss