This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: SV: Redboot Load Error
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Henrik Mau <Henrik dot Mau at sli-institute dot ac dot uk>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Thu, 24 Jun 2004 14:14:37 -0600
- Subject: Re: SV: [ECOS] Redboot Load Error
- Organization: MLB Associates
- References: <0F9B8262E6CD8844B9799F6CE7E3550B07CD2C@SLISERVER21.sli-institute.ac.uk>
On Thu, 2004-06-24 at 14:06, Henrik Mau wrote:
>
> >> When loading an application using the load command in Redboot the
> first
> >> 400 addresses in the srec file do not get copied to the destination
> >> memory. That is, what is listed in the srec file to reside in
> 0x40400
> >> gets copied to 0x40000.
> >> Is there a known fix to this problem?
>
> >What command did you use? This problem has never been reported, so
> most
> >likely there is something else to uncover here.
>
> I was using Hyperterminal on a Windows2000 and the command was
>
> load -v -m yMODEM
>
> I also tried
>
> load -m yMODEM
>
> which gave the same result.
The 'load' command with no options will only put data where the S-record
file indicates, so I'm confused about your error.
Can you send the S-record file (privately to me is OK)?
--
Gary Thomas <gary@mlbassoc.com>
MLB Associates
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss