This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Updating the redboot flash image
- From: <madhusudhan dot gowda at wipro dot com>
- To: <ecos-discuss at ecos dot sourceware dot org>
- Date: Mon, 17 May 2004 17:00:29 +0530
- Subject: [ECOS] Updating the redboot flash image
Hi all,
Thanks Mark for ur valuable link to the redboot src.
I have one doubt over here, I have referred the
ecos user manual, in chapter 4 which says in updating the new
redboot_Rom.bin .
Redboot>load -r -b %{FREEMEMLO} redboot_Rom.bin using TFTP to load the
binary version of image .
Here in the link
Redboot-v1_92p1-npe-bins-builtwith-epk-v1_1.zip contains the
redboot_RAM.bin , redboot_RAM.elf, redboot_RAM.img ,redboot_RAM.srec
redboot_ROM.bin ,redboot_ROM.elf, redboot_ROM.img ,redboot_ROM.srec
also.
Is it ok if I use only the redboot_Rom.bin (new image) for update? If
not can someone
Tell the alternate way to directly put the image onto the redboot flash
using the tftp?
Thanks and regds..
-gowda
Confidentiality Notice
The information contained in this electronic message and any attachments to this message are intended
for the exclusive use of the addressee(s) and may contain confidential or privileged information. If
you are not the intended recipient, please notify the sender at Wipro or Mailadmin@wipro.com immediately
and destroy all copies of this message and any attachments.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss