This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: cannot able to debug


At Mon, 23 Feb 2004 11:53:45 +0530,
Ganeshan wrote:
> Hi
> I am using h8/300H - 3064, gcc-3.2.1,  insight-5.3
> I could not able to debug the a small application and applied the patch,
> http://ysato.dip.jp/~ysato/h8300hal.diff.gz
> 
> 1. If break is given at a specified location, in this case 0x204000, the
> gdb is not sending the proper packet
>     (instread of sending/reading $m,204000, it is sending/reading as
> $m,4000).  The gdb command
>     'set remoteaddresssize 24' is used to send a proper packet.  Even
> though doing this, could not able to set
>     the breakpoint (disassembled the code and saw the instruction.).

Please execute "set machine h8300h" in the first place.

> 2. If set the breakpoint ("trapa") manually, then also the program is
> not stopping at this location.

Because manage the address which set break point inside, 
it is ignored even if bury it in it directly.

-- 
Yoshinori Sato
<ysato@users.sourceforge.jp>

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]