This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
problem using SMC1 serial port of A&M Rattler as console
- From: agyhoo <agyhoo at yahoo dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Mon, 19 Jan 2004 20:12:28 -0800 (PST)
- Subject: [ECOS] problem using SMC1 serial port of A&M Rattler as console
Just wanted to query this board to see if anyone has
experienced problems using the SMC1 serial port of the
Rattler's MPC8250 as the console.
I set the console device to /dev/tty0 and mapped the tty
device to /dev/ser1 (the SMC1 port) using configtool. When
I build the Hello World application using this build of
eCos, nothing is printed.
When I do the same by setting the console to /dev/ttydiag
and disabling the serial hardware drivers, I am able to see
the Hello World message.
Any ideas as to what is going on here? I am not sure if the
HAL diagnostic channel (which as far as I can tell also
uses /dev/ser1 is interfering with the hardware driver. I
tried delecting the /dev/ttydiag driver but got the same
results.
Any tips, pointers will be greatly appreciated.
Thanks.
__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss