This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Porting Problem with stdout
- From: dries <dries at irssystems dot nl>
- To: ecos-discuss at sources dot redhat dot com
- Date: Fri, 16 Jan 2004 16:38:33 -0800
- Subject: [ECOS] Porting Problem with stdout
- Organization: Integrated Residential Systems
Hello,
We are trying to port eCos to a PXA250 board. It seems that a lot of the init
code is working already however printing to stdout (printf) shows output but
uses memory from adres 0x00000000 meaning that our reset and irq vectors are
overwritten by the call to printf. This probably is the reason that our
clock isn't running etc. .. .
Is there anyone that has had the same problem ?
Do we forget to initalize something ?
Any help would be appreciated !!!!
Grtz Dries Pruimboom
--
01110111 01110111 01110111 00101110 01110000 01110010
01110101 01101001 01101101 01100010 01101111 01101111
01101101 00101110 01110100 01101011 <End of message>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss