This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: ROMRAM on EB55
- From: Alan Bowman <ABowman at synaptics-uk dot com>
- To: 'Jani Monoses' <jani at iv dot ro>, ecos-discuss at sources dot redhat dot com
- Date: Tue, 16 Dec 2003 16:00:45 -0000
- Subject: RE: [ECOS] ROMRAM on EB55
Thanks. I've tried building the redboot image myself, and I am getting the same problem, i.e. when I boot into it, I see no output from Hyperterminal. I'm not sure where best to start debugging a ROM(RAM) image. Any suggestions? I don't mind using Redboot from ROM or ROMRAM, but I want my application to run as a ROMRAM app, and I can't get that to work either, so I thought that Redboot would be a better starting point.
-----Original Message-----
From: Jani Monoses [mailto:jani@iv.ro]
Sent: 16 December 2003 15:08
To: ecos-discuss@sources.redhat.com
Subject: Re: [ECOS] ROMRAM on EB55
> It is not (yet) in my ecc file, since the import failed. Do you mean
> that I should remove it from the ecm file (that I pulled from CVS)?
>
yes, from the .ecm then. Grepping shows that the ecm-s in at91 and
powerpc/cme555 and ec555 still reference that option.
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss