This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: PPP on eCos(eb40a), continued...
- From: "Retallack, Mark (Siemens)" <mark dot retallack at siemens dot com>
- To: "'Transferencia de Archivos'" <transfers at phaber dot com>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Fri, 17 Oct 2003 08:58:58 +0100
- Subject: RE: [ECOS] PPP on eCos(eb40a), continued...
You might want to try the LWIP with its ppp stack, it should be smaller.
-----Original Message-----
From: Transferencia de Archivos [mailto:transfers@phaber.com]
Sent: Thursday 16 October 2003 08:07 PM
To: ecos-discuss@sources.redhat.com
Subject: RE: [ECOS] PPP on eCos(eb40a), continued...
>This is not going to be much help, But I think you are right. It sounds
like
>you are running out of RAM memory. Just the net component on its own
without
>the PPP stack is large (in embedded terms).
>
>How much memory have you setup the target to have?
Well, the eb40a has 512k of RAM, I suposse that the space avaliable for the
stack is much less,cuz the other pakgs.
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
Siemens Traffic Controls is a division of Siemens plc. Registered No.
727817, England.
Registered office: Siemens House, Oldbury, Bracknell, Berkshire, RG12 8FZ.
This communication contains information which is confidential and
may also be privileged. It is for the exclusive use of the addressee.
If you are not the addressee please note that any distribution,
reproduction, copying, publication or use of this communication
or the information in it is prohibited. If you have received this
communication in error, please contact us immediately and also
delete the communication from your computer.
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss