This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

RedBoot not able to reach network


I have rebuild RedBoot for ARM Integrator board with ARM920t core module.
While booting I do receive following messages at minicom

RedBoot> +FLASH configuration checksum error or invalid key
Ethernet eth0: MAC address 00:02:b3:8c:8a:bb
Can't get BOOTP info for device!

RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version v2_0 - built 09:37:00, Jul 21 2003

Platform: INTEGRATOR (ARM 9)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x01000000, 0x0000bfe8-0x00edd000 available
FLASH: 0x24000000 - 0x26000000, 256 blocks of 0x00020000 bytes each.
RedBoot>

RedBoot is able to detect the network card I have in one of the PCI slots. I
am able to configure address also but can not ping to other machines on
network. Even I can not ping to loop back address also. If I try to run some
application with function build_boot_record for device eth0, I get error
message "IOCIFADDR: Device not configured".

Any kind of help will be appreciated.

Regards
Mohanlal


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]