This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: redboot cyg_start routine
- From: "Michael Anburaj" <embeddedeng at hotmail dot com>
- To: satish at bvt dot sc dot sanyo dot co dot jp
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Mon, 14 Jul 2003 09:48:58 +0000
- Subject: Re: [ECOS] redboot cyg_start routine
- Bcc:
yes, the serial port settings are fine..!!
some one plz suggest some silution.
I too recently ported the HAL to an ARM920T. Even though my port was pretty
good still it had minor errors & did not work the 1st time. So, I made use
of the CYGHWR_LED_MACRO or LED (my board has a 4 bit LED strip) to debug the
vector.S code. One step at a time. Since, the LED macro should be very
simple, you should not have trouble getting it to work & then you can
sprinkle them as you like (provided you have some LEDs connected to GPIOs on
you board).
Cheers,
-Mike.
_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*.
http://join.msn.com/?page=features/featuredemail
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss