This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: ECOS Port To PXA255
- From: Jani Monoses <jani at iv dot ro>
- To: ecos-discuss at sources dot redhat dot com
- Date: Wed, 2 Jul 2003 14:35:36 +0300
- Subject: Re: [ECOS] ECOS Port To PXA255
- References: <Sea1-F118lMakkhDSFI00055796@hotmail.com>
you can take hal/arm/xscale/ue250 as an example and modify it to suit
your boards peripheral layout etc..
Also check out the porting guide on the ecos site's documentation
section which tells you what the steps are when adding a new platform
> Hi,
>
> I have the task of porting ECOS onto an XScale PXA255 on our custom
> prototype board.
>
> I am relatively new to the GNU/ECOS world but have managed to
> configure it & redboot for the i386 platform to run a simple
> application on a target PC connected to a host PC running Insight for
> downloading/debugging.
>
> Can anyone point me in the right direction on how to go about this
> task and whether anyone else has or is trying to do the same thing?
>
> Thanks in anticipation
>
> _________________________________________________________________
> Get Hotmail on your mobile phone http://www.msn.co.uk/msnmobile
>
>
> --
> Before posting, please read the FAQ:
> http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss