This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

RE: [Reboot] GDB Connection Problem(Intel82559, ARM AP Board)


Attached....

------------------------------------------------------------------------
------------------------------------------------------------------------

(gdb) target remote 165.213.137.215:9000
Remote debugging using 165.213.137.215:9000
Sending packet: $Hc-1#09...putpkt: Junk: RedBoot>
Ack
Packet received: OK
Sending packet: $qC#b4...Ack
Packet received: E02
Sending packet: $qOffsets#4b...Ack
Packet received:
Sending packet: $?#3f...Ack
Packet received: S05
Sending packet: $Hg0#df...Ack
Packet received: OK
Sending packet: $g#67...Sending packet: $g#67...Sending packet: $g#67...
Sending packet: $g
#67...Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing...
Bad register packet; fetching a new packet
Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing...
Bad register packet; fetching a new packet
Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing...
Bad register packet; fetching a new packet
Couldn't establish connection to remote target
Remote communication error: Connection reset by peer.
(gdb)


------------------------------------------------------------------------
-----------------------------------
-----Original Message-----
From: ecos-discuss-owner@sources.redhat.com [mailto:ecos-discuss-
owner@sources.redhat.com] On Behalf Of 백우현
Sent: Monday, June 23, 2003 10:14 AM
To: ecos-discuss@sources.redhat.com
Cc: ecos-devel@sources.redhat.com
Subject: [ECOS] [Reboot] GDB Connection Problem(Intel82559, ARM AP
Board)



eCos/redboot version : 2.0
Board : ARM AP Board(ARM920T)
LAN Card : Intel82559


HI,
 
 I have a problem at using redboot. (cannot connect to gdb with TCP)
 
When I connect to target using telnet,  
 
// Short reply message
ReeBoot> adf
** Error: Illegal command "adf"
RedBoot> help a
Manage aliases kept in FLASH memory
     alias name [value]
 
 
//long reply message 
RedBoot> help
 
// My target is halted.....
 
 
 
 
But  using UART(Serial), everything is OK (Including gdb connection)
 
 
Best regrads. 
 
 


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss



--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]