RE: [ECOS] MPC860 Port for RedBoot?

["Gary D. Thomas" <gary dot thomas at mind dot be>]

On Fri, 2003-05-16 at 09:03, rameshs@danlawinc.com wrote:
> Yes.It was given by my team leader whose name  is chandra shakhar .G.
> 

This referred to the serial drivers for SCCx.  This is now in
place for all PPC8xx boards.

> -----Original Message-----
> From: Gary D. Thomas [mailto:gary.thomas@mind.be]
> Sent: Friday, May 16, 2003 8:35 PM
> To: rameshs@danlawinc.com
> Cc: eCos Discussion
> Subject: RE: [ECOS] MPC860 Port for RedBoot?
> 
> 
> On Fri, 2003-05-16 at 08:47, rameshs@danlawinc.com wrote:
> > There is a macro for sci module which is defined only for 860 but not for
> > 850 board.
> > I dont know weather it is corrected or not.This is mailed to discussion
> list
> > 3 months back.
> > (We added this macro for 850 also.We are working for 850 board.If you dont
> > include this macro some linking errors will get.)
> > S.Ramesh Chandra.
> > 
> 
> eCos & RedBoot build and run fine on the Adder/850.
> 
> I can find no record of any posting by you regarding this.  Perhaps
> you used a different name/address?
> 
> > 
> > 
> > -----Original Message-----
> > From: Gary D. Thomas [mailto:gary.thomas@mind.be]
> > Sent: Friday, May 16, 2003 8:06 PM
> > To: rameshs@danlawinc.com
> > Cc: ernie@aztek-eng.com; eCos Discussion
> > Subject: RE: [ECOS] MPC860 Port for RedBoot?
> > 
> > 
> > On Fri, 2003-05-16 at 08:29, rameshs@danlawinc.com wrote:
> > > Hi,
> > >     You can  start with  adder board with 860 processor.(There is a
> > problem
> > > with 850 processor.)
> > >    This is working finely.
> > >    
> > 
> > What problem with the 850?  It works just fine (on a true Adder
> > from Analogue & Micro which has an 850).
> > 
> > > regds,
> > > S.Ramesh Chanddra.
> > > 
> > > 
> > > 
> > > -----Original Message-----
> > > From: Ernie Biancarelli [mailto:ernie@aztek-eng.com]
> > > Sent: Friday, May 16, 2003 7:59 PM
> > > To: ecos-discuss@sources.redhat.com
> > > Subject: [ECOS] MPC860 Port for RedBoot?
> > > 
> > > 
> > > Hello list,
> > > 
> > > I'm about to start a project based around the PowerPC 860 part. Is 
> > > anyone currently working with the PowerPC 860 family? Are the HAL and 
> > > the QUICC drivers solid? Any feedback on your experiences thus far would
> 
> > > be appreciated.
> > > 
> > > Also, in the short term, I plan on using the MPC860FADS board to start 
> > > development. The CVS repository has an old port of RedBoot, I think, for
> 
> > > the board. Has anyone been using this? Got any pointers about how to get
> 
> > > it up and running?
> > > 
> > > Thanks in advance,
> > > Ernie Biancarelli
> > > 
> > > Boulder, CO
> > > 
> > > 
> > > -- 
> > > Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> > > and search the list archive: http://sources.redhat.com/ml/ecos-discuss
> -- 
> Gary D. Thomas <gary.thomas@mind.be>
-- 
Gary D. Thomas <gary.thomas@mind.be>


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss