This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: RedBoot and eCos application both using the same network port
I would download the latest sources from CVS - then there should be no need
to hand edit files.
Chris
----- Original Message -----
From: "Larry Harmon" <harmon at hrdcorp dot com>
To: "Chris Garry" <cgarry at sweeneydesign dot co dot uk>; <ecos-discuss at sources dot redhat dot com>
Sent: Wednesday, March 26, 2003 3:17 PM
Subject: Re: [ECOS] RedBoot and eCos application both using the same network port
> I am unable to use the same ethernet port for my app and debugging also.
> I am using the PC/net template.
> I built the PC/redboot to use an IP address of 192.168.1.222
> I built the PC/net library to use full DHCP.
> After downloading and starting my test app (basic1 from Massa's book) I see
> ethernet startup messages
> in the console window then the "eth0 xxx: driver didn't set ifq_maxlen"
> message.
>
>
> I don't quite follow the discussion below, of what seems to be the same
> issue.
> Do I need to update my sources using CVS or do I need to hand edit files or
> both?
>
> Larry
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss