This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: command for modifing the hw address
rameshs at danlawinc dot com writes:
> Hi,
> Can any one know how to acess hardware address(ethernet address) and
> modify the hardware address from the redboot configuration data portion
> with a command .I want to know the command.
> If not can any one give how to add a command to redboot to acess the
> ethernet address .I am working on porting redboot on adder board.
>
If this is the A&M Adder board, then you don't need to do that, it
already has RedBoot support and the necessary command to set the MAC
address is already there. I have one right here, and it works fine.
Make sure you are using the latest CVS version of eCos and not V1.3.1.
--
Nick Garnett eCos Kernel Architect
http://www.ecoscentric.com/ The eCos and RedBoot experts
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss