ecos-discuss archive
date index for March, 2003

This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.

Indexes: [Date Index] [Subject Index] [Author Index] [Thread Index]
Site Nav: [Browse other archives for this mailing list]
[Browse other mailing lists at this site]
Search: Limit to:

March 31, 2003
22:48 Re: jffs2 / eCos David Woodhouse
21:27 Re: ser_filter Joerg Rapka wrote: Michael Checky
20:31 Re: Re: jffs2 / eCos Bob Koninckx
19:02 Re: Docs in PDF (make) Jonathan Larmour
18:00 Docs in PDF (make) Iztok Zupet
17:34 sdtin/stdout/stderr redirection Philippe Vandermersch
16:18 problems with GCC-3.2.1 and new/delete operators. marco
14:58 Re: printf does not work in user mode on Arm E7T Jonathan Larmour
14:41 Cannot search ecos-patches Bill Knight
13:38 Re: IPv6 on synth over TAP interface Bart Veer
13:11 IPv6 on synth over TAP interface Andrew Lunn
12:50 Re: printf does not work in user mode on Arm E7T Pierre Habraken
12:43 KS32C5000 eth driver in ecos-v2_0-branch Chris Garry
12:02 Re: delay_us() Nick Garnett
11:43 Querry about Redboot on SH3-DSP processor based board, MS7729SE Rupesh S
11:32 Docs at <http://www.vsr.si/ecos> Iztok Zupet
07:46 Re: delay_us() Motoya Kurotsu
07:18 Re: jffs2 / eCos David Woodhouse
06:50 Re: jffs2 / eCos Jörn Engel
06:26 Re: jffs2 / eCos Bob Koninckx

March 30, 2003
22:13 Re: more __impure_pointer trouble Bart Veer
21:22 Re: jffs2 / eCos Jörn Engel
20:48 jffs2 / eCos Bob Koninckx
20:23 Re: more __impure_pointer trouble Bob Koninckx
18:50 Re: Improvement to makemakefile script Jonathan Larmour
15:24 Re: more __impure_pointer trouble Bart Veer

March 29, 2003
18:43 Re: Improvement to makemakefile script Daniel Néri
15:42 Re: Improvement to makemakefile script Thomas Koeller
09:48 Re: more __impure_pointer trouble Bob Koninckx
07:30 Problem with building redboot on sh4(se7751) koji
01:48 Re: more __impure_pointer trouble Jonathan Larmour

March 28, 2003
23:48 Re: more __impure_pointer trouble Bart Veer
22:55 more __impure_pointer trouble Bob Koninckx
15:45 Re: Re: Questions about eb40a port Konstantin Kletschke
15:12 Re: ser_filter Jonathan Larmour
15:11 Re: [Off topic] Insight 5.3 crash under Win2000 Jonathan Larmour
15:09 Re: Re: Regd CPU IDLE TIME calculation. Jonathan Larmour
15:07 Re: new user Jonathan Larmour
14:40 [Off topic] Insight 5.3 crash under Win2000 Backhaus Willy
14:08 Re: Improvement to makemakefile script Jonathan Larmour
13:54 RE: Improvement to makemakefile script Koeller, T.
13:26 Re: Improvement to makemakefile script Jonathan Larmour
13:19 Re: multi-ice-gdb-server Jonathan Larmour
11:52 ser_filter Joerg Rapka
09:50 RE: Improvement to makemakefile script Koeller, T.
09:14 Re: Low-power application for MPC823e with SDRAMs and cachelocking Alex Schuilenburg
09:04 Regd MMU Prabal Halder
08:58 Regd MMU Prabal Halder
08:56 Re: Regd CPU IDLE TIME calculation. Prabal Halder
08:56 Re: Regd CPU IDLE TIME calculation. Prabal Halder
08:55 Re: Regd CPU IDLE TIME calculation. Prabal Halder
08:06 Re: multi-ice-gdb-server Paul M . Øverby
07:54 new user Alessandro GARDICH
00:05 Re: gethostname question Gary D. Thomas

March 27, 2003
23:12 eCos/Redboot port for Momentum PUMA-A Travis Sawyer
22:07 Re: multi-ice-gdb-server Jonathan Larmour
21:59 Re: Why gdb don't response diag_printf? Jonathan Larmour
21:54 Re: gethostname question Jonathan Larmour
21:48 Re: New config tool does not see last package in ecos.db Jonathan Larmour
21:44 Re: fis from the application Jonathan Larmour
21:36 Re: Problem with simulator Bart Veer
20:52 Re: RE: never ending debug problem Jonathan Larmour
20:49 Re: R: R: R: Problem compiling redboot for XScale Jonathan Larmour
19:32 Re: Problem with simulator Cristoforo Abbattista
18:49 Re: Problem with simulator Bart Veer
18:35 gethostname question Brent Eagles
15:24 Re: running tests - PC Bart Veer
14:52 Re: Questions about eb40a port wkhto
14:48 Re: comments in ecos.db Bart Veer
14:41 New config tool does not see last package in ecos.db Chris Garry
13:52 Problem with simulator Cristoforo Abbattista
13:33 Re: Low-power application for MPC823e with SDRAMs and cache locking Rupesh S
12:52 Low-power application for MPC823e with SDRAMs and cache locking Karl-Magnus Moeller
12:28 fis from the application Bob Koninckx
09:52 RE: never ending debug problem Westwood, Geoff
09:13 Re: Question about Instrumentation? Thanks Andrew Lunn
07:31 Re: eCos PPP implementation Jani Monoses
07:21 R: R: R: Problem compiling redboot for XScale Pascal Pediroda @ Brime
03:07 eCos PPP implementation Jim Gordon
02:54 Re: Why gdb don't response diag_printf? Water He
02:49 Re: powerpc simulator as a GDB target in eCos Jonathan Larmour
02:04 Re: Where do I get file which can link eCos i386-elf-gcc? Paul_Chien

March 26, 2003
21:24 Re: printf does not work in user mode on Arm E7T Pierre Habraken
20:53 Re: Questions about eb40a port Konstantin Kletschke
18:58 Re: R: R: Problem compiling redboot for XScale Jonathan Larmour
17:59 Re: Question about Instrumentation? Thanks Jonathan Larmour
17:41 R: R: Problem compiling redboot for XScale Pascal Pediroda @ Brime
17:09 RE: Question about Instrumentation? Thanks Qiang Huang
16:57 Re: R: Problem compiling redboot for XScale Jonathan Larmour
16:54 Re: Why gdb don't response diag_printf? Jonathan Larmour
16:49 Re: printf does not work in user mode on Arm E7T Jonathan Larmour
16:43 Re: printf does not work in user mode on Arm E7T Jonathan Larmour
16:40 Re: ecos timing issue Jonathan Larmour
16:37 Re: RE: A build and a debug question Jonathan Larmour
16:31 Re: RedBoot and eCos application both using the same networkport Jonathan Larmour
16:31 cdl-guide preliminary version in PDF done Iztok Zupet
16:30 R: Problem compiling redboot for XScale Pascal Pediroda @ Brime
16:30 Re: Question about Instrumentation? Thanks Jonathan Larmour
16:17 Re: Problem compiling redboot for XScale Jonathan Larmour
16:05 RE: Question about Instrumentation? Thanks Qiang Huang
15:43 Problem compiling redboot for XScale Pascal Pediroda @ Brime
15:24 Re: RedBoot and eCos application both using the same network port Chris Garry
15:22 Re: Question about Instrumentation? Thanks Andrew Lunn
15:16 Re: RedBoot and eCos application both using the same network port Larry Harmon
15:11 RE: Question about Instrumentation? Thanks Qiang Huang
14:55 RE: Vr4131 porting issues Jurica Baricevic
14:28 Re: RE: A build and a debug question Gary D. Thomas
13:06 Re: ip truncated: 34 bytes missing: icmp:echo reply M.PREM KUMAR
13:02 Re: Question about Instrumentation? Thanks Nick Garnett
12:56 Re: cdl-guide Iztok Zupet
12:56 Re: printf does not work in user mode on Arm E7T Pierre Habraken
12:49 Re: Redboot serial link speed on Arm E7T Jonathan Larmour
12:48 Re: cdl-guide Jonathan Larmour
12:39 Re: ip truncated: 34 bytes missing: icmp:echo reply M.PREM KUMAR
12:28 Re: GDB for MIPS Jonathan Larmour
12:28 Re: cdl-guide Iztok Zupet
12:21 Re: ip truncated: 34 bytes missing: icmp:echo reply Jani Monoses
12:18 Re: cdl-guide Jonathan Larmour
12:05 Re: ip truncated: 34 bytes missing: icmp:echo reply Andrew Lunn
11:59 ip truncated: 34 bytes missing: icmp:echo reply M.PREM KUMAR
10:55 Re: printf does not work in user mode on Arm E7T Thomas BINDER
10:49 Re: Question about Instrumentation? Thanks Andrew Lunn
10:42 Question about Instrumentation? Thanks Qiang Huang
10:33 Re: ecos timing issue Nick Garnett
10:28 Re: RedBoot and eCos application both using the same network port Chris Garry
09:59 RE: A build and a debug question Westwood, Geoff
09:31 Re: Regd CPU IDLE TIME calculation. Andrew Lunn
09:17 Re: cdl-guide Iztok Zupet
09:15 Regd CPU IDLE TIME calculation. Prabal Halder
09:08 Re: cdl-guide Andrew Lunn
09:03 cdl-guide Iztok Zupet
08:26 Re: GDB for MIPS Michael Anburaj
08:26 Re: printf does not work in user mode on Arm E7T Andrew Lunn
08:15 Re: ecos timing issue Andrew Lunn
08:12 Re: Redboot serial link speed on Arm E7T Iztok Zupet
08:10 printf does not work in user mode on Arm E7T Pierre Habraken
07:45 Re: Redboot serial link speed on Arm E7T Pierre Habraken
03:52 Why gdb don't response diag_printf? Water He
03:42 Re: Conditional CDL amit . goel
03:30 ecos timing issue Sathyanarayanan SAMPATHKUMAR
03:30 ecos timing issue Sathyanarayanan SAMPATHKUMAR

March 25, 2003
21:43 Re: Tk screenshots (off topic) David N. Welton
20:14 Re: RE: Re debug Problem Jonathan Larmour
17:14 Re: Has anybody compared ecos with embedded linux? amassa at san dot rr dot com
17:08 Re: RedBoot and eCos application both using the same networkport Jonathan Larmour
16:34 Re: RedBoot and eCos application both using the same network port Andrew Lunn
16:30 Questions about eb40a port wkhto
16:28 Re: RedBoot and eCos application both using the same network port Andrew Lunn
16:23 RE: Re debug Problem Westwood, Geoff
16:21 Re: Questions about the eCos high level serial device driver Michael Checky
16:19 Re: RedBoot and eCos application both using the same network port Chris Garry
16:18 Re: More questions about the eCos high level serial device driver Michael Checky
16:02 running tests - PC Larry Harmon
15:54 Re: nt getc(CYG_ADDRESS (*)[9999])' defined both normally and as an alias Bart Veer
15:50 Re: Re debug Problem Gary D. Thomas
15:38 Re debug Problem Westwood, Geoff
15:20 Re: Scheduler question ... Thomas BINDER
14:40 Re: A build and a debug question Gary D. Thomas
13:17 nt getc(CYG_ADDRESS (*)[9999])' defined both normally and as an alias davidofarrell
12:22 Re: Porting RedBoot to NEC V850 platform Stephan Eisvogel
12:07 Re: delay_us() Jonathan Larmour
11:54 Re: GDB for MIPS Jonathan Larmour
11:52 Re: Scheduler question ... Andrew Lunn
11:52 Re: problems installing ecos 2.0 beta Jonathan Larmour
11:51 Re: Questions about the eCos high level serial device driver Jonathan Larmour
11:50 Scheduler question ... Thomas BINDER
11:44 Re: Where do I get file which can link eCos i386-elf-gcc? Jonathan Larmour
11:39 Re: --with-gxx-include-dir option Jonathan Larmour
11:17 Re: --with-gxx-include-dir option Bart Veer
11:11 RE: Vr4131 porting issues Jurica Baricevic
10:48 Re: Vr4131 porting issues Jonathan Larmour
08:33 Where do I get file which can link eCos i386-elf-gcc? Paul_Chien
07:18 Re: Re: Porting RedBoot to NEC V850 platform savin . zlobec
03:01 Re: Has anybody compared ecos with embedded linux? Jonathan Larmour
02:39 Re: More questions about the eCos high level serial devicedriver Jonathan Larmour
02:22 Re: printf/cyg_user_start/main Jonathan Larmour
01:09 Re: no graphical interface with GDB ?? Jonathan Larmour
00:56 Re: _impure_ptr ?? Jonathan Larmour
00:23 Re: RedBoot and eCos application both using the same networkport Jonathan Larmour
00:07 Re: Re: A Build and a debug question Jonathan Larmour

March 24, 2003
23:53 Re: Re: Porting RedBoot to NEC V850 platform Jonathan Larmour
23:50 Re: Porting RedBoot to NEC V850 platform Jonathan Larmour
23:47 Re: Re: A Build and a debug question Gary D. Thomas
23:44 Re: Building toolchain for eCOS Jonathan Larmour
23:30 Re: comments in ecos.db Jonathan Larmour
23:28 Re: --with-gxx-include-dir option Jonathan Larmour
23:08 Re: FOSDEM 2003 report Jonathan Larmour
22:45 Re: _impure_ptr ?? Bart Veer
22:36 Re: _impure_ptr ?? Bart Veer
22:28 Re: _impure_ptr ?? Jonathan Larmour
22:12 Re: A Build and a debug question Geoff
21:44 Re: FOSDEM 2003 report David N. Welton
21:42 Re: --with-gxx-include-dir option Bart Veer
21:42 Re: (off topic) companies that use eCos Alex Schuilenburg
21:37 Re: _impure_ptr ?? Thomas Koeller
21:35 Re: _impure_ptr ?? Bob Koninckx
21:31 Re: _impure_ptr ?? Gary D. Thomas
21:26 Re: _impure_ptr ?? Bart Veer
21:01 Re: A Build and a debug question Gary D. Thomas
20:58 Re: Porting RedBoot to NEC V850 platform savin . zlobec
20:35 (off topic) companies that use eCos David N. Welton
20:12 A Build and a debug question Geoff
18:36 Re: Porting RedBoot to NEC V850 platform Nick Garnett
18:25 Re: Netsilicon NS7520 Tim michals
18:17 Netsilicon NS7520 Daniel Schwager
18:10 Re: PC redboot doesn't work for me - 2.0b1 Nick Garnett
17:45 Memory Layout questions wkhto
17:28 Re: no graphical interface with GDB ?? Bart Veer
17:18 Re: Vr4131 porting issues Bart Veer
15:42 Porting RedBoot to NEC V850 platform Stephan Eisvogel
14:00 Re: idt mips board port question HG
13:24 Re: PC redboot doesn't work for me - 2.0b1 Larry Harmon
12:13 Building toolchain for eCOS Uwe Kindler
12:01 RE: Problem running redboot from eb40a Konstantin Kletschke
11:43 comments in ecos.db Jani Monoses
10:32 Re: Regd delay Nick Garnett
10:32 Re: PC redboot doesn't work for me - 2.0b1 Nick Garnett
08:53 --with-gxx-include-dir option Teo Han Wei
06:41 Regd delay Prabal Halder

March 23, 2003
23:31 PC redboot doesn't work for me - 2.0b1 Larry Harmon
23:29 PC redboot doesn't run Larry Harmon
23:28 RE: idt mips board port question Tim michals
22:48 (3) AT91EB40 Eval boards available Steven
19:10 Re: eCOS 2.0 install vs CVS checkout Gary D. Thomas
18:56 Re: eCOS 2.0 install vs CVS checkout Greg Holdren
17:18 http://www.vsr.si/ecos Doc page Iztok Zupet
16:15 Re: eCOS 2.0 install vs CVS checkout Gary D. Thomas
16:12 eCOS 2.0 install vs CVS checkout Tim michals

March 22, 2003
16:04 Re: _impure_ptr ?? Bob Koninckx
15:58 Re: Original FreeBSD-release version ? 고재용
14:05 RedBoot and eCos application both using the same network port Chris Garry
13:46 Re: _impure_ptr ?? Bob Koninckx
12:58 Re: _impure_ptr ?? Bob Koninckx
12:48 Re: _impure_ptr ?? Gary D. Thomas
12:30 _impure_ptr ?? Bob Koninckx
12:22 Re: Original FreeBSD-release version ? Gary D. Thomas
03:31 Original FreeBSD-release version ? koh,jaeyong
03:03 supply promotion item from china denis
01:31 Re: FOSDEM 2003 report Peter Vandenabeele
01:25 idt mips board port question HG

March 21, 2003
21:32 Re: Max number of priorities using mlqueue scheduler Nick Garnett
19:52 RE: eCos build net failed Dean Wang
19:13 Help... I broke ecosconfig 2.11 on a W2k system Rycerz Roman-G11565
19:11 Re: Max number of priorities using mlqueue scheduler Jonathan Larmour
19:08 Re: PDF documentation available? Grant Edwards
18:07 Re: Max number of priorities using mlqueue scheduler Nick Garnett
17:36 eCos DP83902a driver Mikael Starvik
14:40 Re: PDF documentation available? Jonathan Larmour
14:36 Re: Disk On Chip support for I386 Jonathan Larmour
14:34 Re: Is the Dreamcast platform still active? Jonathan Larmour
14:31 Re: Max number of priorities using mlqueue scheduler Jonathan Larmour
14:28 Re: Redboot serial link speed on Arm E7T Jonathan Larmour
14:24 Re: How to build gnutools for ecos2.0beta?? Jonathan Larmour
14:16 How to build gnutools for ecos2.0beta?? Jepsen Hans Peter
13:01 Max number of priorities using mlqueue scheduler Daniel Lidsten
11:03 RE: Problem running redboot from eb40a Koeller, T.
10:05 Re: Problem about using gdb which is started form redboot 叶晓晖
08:56 Problem about using gdb which is started form redboot 叶晓晖
08:56 Problem about using gdb which started form redboot 叶晓晖
08:28 Redboot serial link speed on Arm E7T Pierre Habraken
08:28 Re: FOSDEM 2003 report Bob Koninckx
05:08 Re: FOSDEM 2003 report Jonathan Larmour
02:21 Re: FOSDEM 2003 report David N. Welton
02:18 Re: eCos build net failed Jonathan Larmour
02:00 FOSDEM 2003 report Jonathan Larmour

March 20, 2003
21:49 Do You Use PowerPoint? You'll Love This... incoming
21:02 Re: Disk On Chip support for I386 Larry Harmon
20:25 RE: Problem running redboot from eb40a Gary D. Thomas
20:22 RE: Problem running redboot from eb40a wkhto
20:15 Re: Disk On Chip support for I386 Gary D. Thomas
20:13 Disk On Chip support for I386 Gregg C Levine
19:45 RE: Problem running redboot from eb40a Timothy Woods
19:40 Is the Dreamcast platform still active? Gregg C Levine
18:17 Re: Problem running redboot from eb40a Shannon Holland
18:11 Re: building eb40a redboot, crc.h issues Shannon Holland
17:43 Re: building eb40a redboot, crc.h issues Konstantin Kletschke
17:27 Re: configtool.exe hangs John Dallaway
16:52 Problem running redboot from eb40a wkhto
16:44 PDF documentation available? Grant Edwards
16:33 Re: Problem about using gdb which is started form redboot Jonathan Larmour
16:29 Re: Temporary IP address assignment trick Andrew Lunn
16:28 Re: Temporary IP address assignment trick Grant Edwards
16:28 Re: Questions about the eCos high level serial device driver Jani Monoses
16:22 Re: Temporary IP address assignment trick Jonathan Larmour
16:07 configtool.exe hangs Larry Harmon
15:57 Re: Temporary IP address assignment trick Grant Edwards
15:47 Re: Temporary IP address assignment trick Jonathan Larmour
15:42 Re: no graphical interface with GDB ?? Larry Harmon
15:20 Re: no graphical interface with GDB ?? Andrew Lunn
15:19 Re: Temporary IP address assignment trick Grant Edwards
15:16 no graphical interface with GDB ?? Larry Harmon
15:07 Re: Temporary IP address assignment trick Andrew Lunn
15:00 Re: Temporary IP address assignment trick Grant Edwards
14:04 Re: Problem about using gdb which is started form redboot 叶晓晖
13:40 Re: building eb40a redboot, crc.h issues Jonathan Larmour
13:37 Re: building eb40a redboot, crc.h issues Andrew Lunn
13:33 Re: building eb40a redboot, crc.h issues Konstantin Kletschke
13:02 Re: Building Redboot with ver 3.2.1 of the arm-elf- tools Nick Garnett
12:32 Re: Stack access violations in eCos Larice Robert
12:24 Re: Stack access violations in eCos Larice Robert
12:14 Re: Help: How to get Keyboard input in synthetic environmet? Jonathan Larmour
12:04 Re: Stack access violations in eCos Jonathan Larmour
11:56 Re: building eb40a redboot, crc.h issues Jonathan Larmour
11:51 Re: Stack access violations in eCos Bart Veer
11:51 Re: Re: Help: How to get Keyboard input in synthetic environmet? Zhangzheng
11:49 Re: eCos 2.0b1 testing on PC Jonathan Larmour
11:49 building eb40a redboot, crc.h issues Konstantin Kletschke
11:43 Re: ecos2.0beta Jonathan Larmour
11:38 Re: Temporary IP address assignment trick Jonathan Larmour
11:28 ecos2.0beta Reinhard JESSICH
11:19 Re: Stack access violations in eCos Larice Robert
11:17 RE: Vr4131 porting issues Jurica Baricevic
11:15 Re: ecos2.0beta Jonathan Larmour
11:14 Re: Problem about using gdb which is started form redboot Jonathan Larmour
11:13 Re: Help: How to get Keyboard input in synthetic environmet? Andrew Lunn
11:10 Re: Stack access violations in eCos Bart Veer
11:08 Re: Help: How to get Keyboard input in synthetic environmet? Jonathan Larmour
11:04 Re: Stack access violations in eCos Jonathan Larmour
11:00 Re: Stack access violations in eCos Larice Robert
10:53 Re: Regd system current time Andrew Lunn
10:52 Re: Stack access violations in eCos Jonathan Larmour
10:51 RE: Vr4131 porting issues Jurica Baricevic
10:45 Regd system current time Prabal Halder
10:11 Re: Building Redboot with ver 3.2.1 of the arm-elf- tools Chris Garry
08:10 Re: Stack access violations in eCos Larice Robert
08:04 Re: Help: How to get Keyboard input in synthetic environmet? Andrew Lunn
05:44 Help: How to get Keyboard input in synthetic environmet? Zhangzheng
02:26 Problem about using gdb which is started form redboot 叶晓晖

March 19, 2003
23:42 Re: Stack access violations in eCos Jonathan Larmour
23:10 Re: multiple eth devices for RedBoot Gary D. Thomas
22:54 ecos2.0beta Bob Koninckx
22:51 Temporary IP address assignment trick Grant Edwards
22:11 Re: multiple eth devices for RedBoot Mark Salter
21:28 Re: multiple eth devices for RedBoot Gary D. Thomas
20:09 multiple eth devices for RedBoot Mark Salter
19:42 Re: eCos 2.0b1 testing on PC Iztok Zupet
18:49 eCos 2.0b1 testing on PC Iztok Zupet
18:07 Re: Vr4131 porting issues Nick Garnett
18:07 Re: Vr4131 porting issues Nick Garnett
18:07 Re: Building Redboot with ver 3.2.1 of the arm-elf- tools Nick Garnett
16:17 Re: Re: eCos 2.0b1 testing on Atmel AT91EB40 Jani Monoses
16:06 Re: eCos 2.0b1 testing on Atmel AT91EB40 John Dallaway
15:08 RE: Stack access violations in eCos Erik Aagaard Knudsen
14:54 Re: problem about ecos/mcf5272 Bart Veer
14:49 eCos 2.0b1 testing on Atmel AT91EB40 John Dallaway
14:20 Re: problem about ecos/mcf5272 Gary D. Thomas
13:47 Re: Vr4131 porting issues Bart Veer
13:38 Re: Stack access violations in eCos Larice Robert
13:11 Building Redboot with ver 3.2.1 of the arm-elf- tools Chris Garry
12:47 problem about ecos/mcf5272 zhe zhang
11:31 RE: Vr4131 porting issues Jurica Baricevic
11:05 Re: Stack access violations in eCos Andrew Lunn
10:56 Stack access violations in eCos Erik Aagaard Knudsen
10:49 RE: Vr4131 porting issues Jurica Baricevic
09:25 Re: More questions about the eCos high level serial device driver Roland Caßebohm
03:48 Re: More questions about the eCos high level serial devicedriver Gary D. Thomas
02:00 printf/cyg_user_start/main Zi Zhou
01:27 printf/cyg_user_start/main Zi Zhou
00:59 More questions about the eCos high level serial device driver Michael Checky

March 18, 2003
22:30 Has anybody compared ecos with embedded linux? Qiang Huang
20:56 Re: faq on applying a patch ????? Tim michals
20:23 Re: faq on applying a patch ????? Gary D. Thomas
20:16 faq on applying a patch ????? HG
19:12 Re: Vr4131 porting issues Nick Garnett
18:46 Re: Vr4131 porting issues Andrew Lunn
18:07 Re: Vr4131 porting issues Nick Garnett
15:19 Downloading patches for eCOS 2.0 Tim michals
12:30 Vr4131 porting issues Jurica Baricevic
10:06 multi-ice-gdb-server Paul M . Øverby
00:30 Questions about the eCos high level serial device driver Michael Checky

March 17, 2003
20:59 Re: problems installing ecos 2.0 beta David N. Welton
20:56 problems installing ecos 2.0 beta Larry Harmon
19:57 RE: Erratic insight/gdb behavior Rycerz Roman-G11565
19:22 Re: Using eCos or not to use Ecos ? Jonathan Larmour
17:31 Re: Erratic insight/gdb behavior Bob Koninckx
17:30 Re: Erratic insight/gdb behavior Andrew Lunn
17:29 Using eCos or not to use Ecos ? Stefano Gallina
17:23 Erratic insight/gdb behavior Rycerz Roman-G11565
17:12 Re: eCos 2.0 Beta announcement Iztok Zupet
16:55 Re: eCos 2.0 Beta announcement Jonathan Larmour
16:38 Re: eCos 2.0 Beta announcement Iztok Zupet
15:36 Re: Testing eCOS 2.0 for IDT79s334a (Latest patches for IDT334a) Jonathan Larmour
15:12 Testing eCOS 2.0 for IDT79s334a (Latest patches for IDT 334a) t . michals
15:09 eCos 2.0 Beta announcement Jonathan Larmour
10:36 Re: GDB for MIPS Nick Garnett
07:13 GDB for MIPS Michael Anburaj
07:05 delay_us() Motoya Kurotsu

March 14, 2003
23:34 Re: Re: Problem using "go" command Grant Edwards
23:19 Re: Re: Problem using "go" command Gary D. Thomas
20:52 RE: Interrupt state at program startup Patrick Doyle
20:33 Re: Interrupt state at program startup Mark Salter
20:19 Interrupt state at program startup Patrick Doyle
19:28 Re: Problem using "go" command Grant Edwards
19:23 Re: Problem using "go" command Deepak Saxena
18:46 RE: Problem using "go" command Patrick Doyle
15:10 Re: eCos with an ISS Aldo Dolfi
13:28 Alignment errors Erik Aagaard Knudsen
09:42 multi-ice-gdb-server Paul M . Øverby

March 13, 2003
23:52 Re: eCos with an ISS Gary D. Thomas
23:42 eCos with an ISS Aldo Dolfi
23:13 Re: gcc error on arm compile Daniel Néri
20:54 ecos web site front page David N. Welton
20:34 Re: Debugging a Redboot Gary D. Thomas
20:31 Re: Re: Build help please ? Gary D. Thomas
19:33 Debugging a Redboot Rycerz Roman-G11565
18:31 Re: command for modifing the hw address Nick Garnett
18:14 Re: Build help please ? Geoff
17:55 gcc error on arm compile Charles-Henri Balet
17:32 Re: thread safety in sprintf ... Bart Veer
17:31 RE: Debugging from ROM Rich LeGrand
17:17 Re: Re: Build help please ? Gary D. Thomas
17:13 Re: problems compiling host tools Bart Veer
17:09 Re: Build help please ? Geoff
16:48 Re: problems compiling host tools Aldo Dolfi
16:44 Re: Debugging from ROM Bart Veer
16:41 Pb with hal_cache.h for the ARM9 variants Tristan Corcelle
16:39 Re: Build help please ? Gary D. Thomas
16:33 Build help please ? Geoff
16:30 Re: GCC 3.2.x ECOS patch Bart Veer
16:15 Re: Compile problems when including Posix compatibility package Bart Veer
15:12 Re: eCos build fails when INET support is disabled Bart Veer
15:08 RE: Debugging from ROM Rich LeGrand
15:00 RE: command for modifing the hw address rameshs
14:21 Re: Debugging from ROM Bart Veer
14:09 Re: About cyg_drv_dsr_lock and cyg_drv_cond_wait. Nick Garnett
14:09 Re: Difficulty finding 82559-based cards Nick Garnett
14:09 Re: command for modifing the hw address Nick Garnett
14:07 Re: Ethernet driver for the Netsilicon Net+50 board Bart Veer
14:05 Re: Debugging from ROM Gary D. Thomas
13:25 Re: SCC driver for 8xx PowerPC processors Geoff
13:11 Re: Difficulty finding 82559-based cards Andrew Lunn
12:51 Difficulty finding 82559-based cards Paul van Zyl
11:47 About cyg_drv_dsr_lock and cyg_drv_cond_wait. chandrag
11:34 command for modifing the hw address rameshs
10:59 Re: Request to give information. Andrew Lunn
10:35 Re: minor CDL problem Andrew Lunn
10:29 minor CDL problem Koeller, T.
10:25 Request to give information. Kiran Raj
05:07 Debugging from ROM Rich LeGrand

March 12, 2003
18:47 GCC 3.2.x ECOS patch Talley, Mike
16:51 Ethernet driver for the Netsilicon Net+50 board Tristan Corcelle
12:30 Compile problems when including Posix compatibility package Ian Gilmour
12:08 redboot configuration data block acessing rameshs
08:16 Re: Regarding delays in UDP (ethernet) ISR Andrew Lunn
05:19 Regarding delays in UDP (ethernet) ISR Rajan Srivastava

March 11, 2003
16:52 Re: SCC driver for 8xx PowerPC processors Gary D. Thomas
16:44 Re: SCC driver for 8xx PowerPC processors Paul Randall
15:18 Re: redboot exec problem and possible fix Gary D. Thomas
15:13 redboot exec problem and possible fix Mark Salter
11:57 Re: Regd scheduling statistics Andrew Lunn
11:53 Regd scheduling statistics Rajan Srivastava
11:42 Re: Problems receiving packets on i82559 Andrew Lunn
11:23 RE: Problems receiving packets on i82559 Nikhil R.
11:09 Re: Problems receiving packets on i82559 Andrew Lunn
11:04 RE: Problems receiving packets on i82559 Nikhil R.
11:03 Re: eCos tests Andrew Lunn
11:00 Re: read from user port Harri Siirtola
10:51 Re: eCos tests Paul M . Øverby
10:25 Re: Problems receiving packets on i82559 Andrew Lunn
10:16 thread safety in sprintf ... Thomas BINDER
10:09 RE: Problems receiving packets on i82559 Nikhil R.
07:40 Re: ip address acessing in application saved by redboot. Christoph Csebits
07:27 ip address acessing in application saved by redboot. rameshs
01:05 Re: read from user port Gary D. Thomas
00:40 read from user port Katerina Malatara

March 10, 2003
17:58 Assembly examples ! urgent ! Stefano Gallina
16:01 Re: eCos tests Andrew Lunn
15:13 eCos tests Paul M . Øverby
03:08 Re: eCos support for Oki ML674000 Daniel Leu

March 09, 2003
21:58 Re: python? Gary D. Thomas
21:28 Re: python? Shannon Holland
20:16 EDB7312 LCD and KEYPAD Example Paul Gresham
19:37 Re: python? Gary D. Thomas
19:27 Re: python? Shannon Holland
19:25 Re: python? Shannon Holland
14:14 Re: python? Gary Thomas
08:59 Re: python? David N. Welton
06:09 python? Shannon Holland
01:18 Re: SCC driver for 8xx PowerPC processors Gary D. Thomas

March 08, 2003
23:17 Fw: SCC driver for 8xx PowerPC processors Frank Robbins
23:10 Re: SCC driver for 8xx PowerPC processors Frank Robbins

March 07, 2003
22:21 Re: SCC driver for 8xx PowerPC processors Gary D. Thomas
22:10 Two messages when ASSERT FAIL Fabrice Gautier
22:09 SCC driver for 8xx PowerPC processors Paul Randall
21:59 Re: In need of code to setup the Galileo GT64360 systemcontroller Gary D. Thomas
21:51 In need of code to setup the Galileo GT64360 system controller Louis Gagne
18:35 Re: problems compiling host tools Jonathan Larmour
15:18 Re: new kernel: question Nick Garnett
13:07 Re: Evaluator 7T: using syscalls with RedBoot Pierre Habraken
12:23 RE: Problems receiving packets on i82559 Gary D. Thomas
12:23 Re: Problems receiving packets on i82559 Andrew Lunn
12:15 RE: Problems receiving packets on i82559 Nikhil R.
12:04 Re: eCos build fails when INET support is disabled Jonathan Larmour
11:57 Re: eCos build fails when INET support is disabled Gary D. Thomas
11:56 Re: ecos sync problem: Does it work well? Jonathan Larmour
11:49 Re: eCos build fails when INET support is disabled Chris Garry
11:43 Re: eCos build fails when INET support is disabled Andrew Lunn
11:41 Re: eCos build fails when INET support is disabled Andrew Lunn
11:38 Re: eCos build fails when INET support is disabled Gary D. Thomas
11:33 eCos build fails when INET support is disabled Chris Garry
11:06 Re: New flash chip driver for SST39VF160 Jonathan Larmour
08:32 Re: ping with more than 1472 bytes fails in ecos tcp/ip stack Andrew Lunn
08:31 Re: Problems receiving packets on i82559 Andrew Lunn
07:30 Re: ping with more than 1472 bytes fails in ecos tcp/ipstack Jani Monoses
07:23 ping with more than 1472 bytes fails in ecos tcp/ip stack Prakash Hanumanthappa
06:41 Problems receiving packets on i82559 Nikhil R.
04:37 new kernel: question 张 亮

March 06, 2003
21:24 New flash chip driver for SST39VF160 Andy Hare
17:57 Re: flash and ram file i/o Jonathan Larmour
17:48 Re: problems running tests Jonathan Larmour
17:16 problems running tests Larry Harmon
16:37 Re: RE: AT91 patches Jonathan Larmour
15:44 Re: problems compiling host tools Bart Veer
15:38 Re: power service Bart Veer
14:32 Re: problems compiling host tools Aldo Dolfi
14:15 RE: RE: AT91 patches Koeller, T.
14:04 power service Jani Monoses
12:59 Re: Evaluator 7T: using syscalls with RedBoot Mark Salter
12:48 Evaluator 7T: using syscalls with RedBoot Pierre Habraken
11:13 flash and ram file i/o Ian Gilmour
04:06 Re: Re: Running an application - How to continue without gdb Jonathan Larmour
02:19 Re: Running an application - How to continue without gdb Bahadir Balban
01:50 Re: diag_printf Jonathan Larmour
01:36 Re: problems compiling host tools Jonathan Larmour

March 05, 2003
22:00 Re: problems compiling host tools Aldo Dolfi
21:23 Re: diag_printf Pete Barrie
20:58 Re: diag_printf Gary D. Thomas
20:53 diag_printf Pete Barrie
18:34 Re: Running an application - How to continue without gdb Jonathan Larmour
18:29 Re: Evaluator 7T: using Redboot syscalls Pierre Habraken
17:36 Re: Running an application - How to continue without gdb Gary D. Thomas
17:32 Running an application - How to continue without gdb Bahadir Balban
17:14 Re: Evaluator 7T: Redboot flash support Bahadir Balban
15:59 Re: Evaluator 7T: using Redboot syscalls Pierre Habraken
14:07 Re: ecos sync problem: Does it work well? Jonathan Larmour
09:56 Re: ecos sync problem: Does it work well? 张 亮
06:59 Re: MPC860, MSR initialization Jonathan Larmour
05:54 Re: ecos sync problem: Does it work well? Gary D. Thomas
05:50 Re: MPC8260 fec, dpram, immr Gary D. Thomas
05:47 Re: MPC860, MSR initialization Gary Thomas
05:25 ecos sync problem: Does it work well? 张 亮
04:19 MPC8260 fec, dpram, immr Water He
02:09 Re: build problem with CVS tree downloaded, & PPP needed Jonathan Larmour
02:02 Re: redboot startup type/gdb Jonathan Larmour
01:58 Re: MPC860, MSR initialization Jonathan Larmour
01:43 Re: Evaluator 7T: Redboot flash support Jonathan Larmour
01:40 Re: hal_idle_thread_action on ARM Jonathan Larmour
01:31 Re: g++ and library missing on Mandrake 9.0 Jonathan Larmour
01:28 Re: Blocking while recv() with freebsd/openbsd tcp/ip-stack Jonathan Larmour
00:47 Re: trying to build eCos... Jonathan Larmour
00:42 redboot startup type/gdb Zi Zhou

March 04, 2003
22:26 MPC860, MSR initialization Radu Cernea
19:34 Re: trying to build eCos... Paul M . Øverby
17:47 Evaluator 7T: Redboot flash support Pierre Habraken
17:03 hal_idle_thread_action on ARM Daniel Néri
15:39 Re: Namespace pollution Gary D. Thomas
15:31 Re: Namespace pollution Bart Veer
15:23 Re: trying to build eCos... Jonathan Larmour
15:18 Re: Namespace pollution Jonathan Larmour
15:17 Re: Namespace pollution Jonathan Larmour
14:33 Re: Namespace pollution Andrew Lunn
14:23 Namespace pollution Gary D. Thomas
14:20 Re: trying to build eCos... Chris Garry
11:59 Re: trying to build eCos... Paul M . Øverby
11:53 Re: trying to build eCos... Paul M . Øverby
10:35 About jffs2 gu xm
08:44 g++ and library missing on Mandrake 9.0 Stefano Gallina
08:40 Blocking while recv() with freebsd/openbsd tcp/ip-stack Roland Brühwiler
01:11 Apologies for noise on the list Geoff Patch
00:35 Re: Question about building reboot on RedHat 8.0 system usingecosconfig Jonathan Larmour
00:32 Re: Question about building reboot on RedHat 8.0 system using ecosconfig Louis Gagne

March 03, 2003
17:49 Re: bug about MPC8260 FEC driver? Paul Fine
17:43 Re: Re: Evaluator 7T: using Redboot syscalls Jonathan Larmour
17:42 Re: bug about MPC8260 FEC driver? Jonathan Larmour
17:19 Re: bug about MPC8260 FEC driver? Paul Fine
17:15 Re: Evaluator 7T: using Redboot syscalls Pierre Habraken
17:08 Re: bug about MPC8260 FEC driver? Gary Thomas
16:51 Re: bug about MPC8260 FEC driver? Paul Fine
14:49 Re: trying to build eCos... Jonathan Larmour
14:37 Happy 03/03/03 Patrick Doyle
13:51 Re: bug about MPC8260 FEC driver? Gary D. Thomas
13:32 trying to build eCos... Paul M . Øverby
12:30 ecosconfig build problem Koeller, T.
11:05 build problem with CVS tree downloaded, & PPP needed Rajeev Kandregula
08:30 re: i82559 and FreeBSD stack Andrew Lunn
08:27 another bluetooth question Jani Monoses
06:45 Re: bug about MPC8260 FEC driver? He HaiYang

March 02, 2003
23:40 Re: [eCos v1.3.1/net] Old-style path convention results in Run Tests error Bart Veer
20:39 Sharp LH79520 ARM microcontroller Charles-Henri Balet
12:22 Re: bug about MPC8260 FEC driver? Gary D. Thomas
06:16 bug about MPC8260 FEC driver? he_hai_yang
05:57 bug about MPC8260 FEC driver? Water He
05:41 Re: [eCos v1.3.1/net] Old-style path convention results in Run Tests error Christopher Faylor
05:30 Re: [eCos v1.3.1/net] Old-style path convention results in Run Tests error Christopher Faylor

March 01, 2003
22:45 Re: HD file system? Jonathan Larmour
16:48 Re: HD file system? Jonathan Larmour
13:39 Re: [eCos v1.3.1/net] Old-style path convention results inRun Tests error Jonathan Larmour
13:33 Re: HD file system? Eric Verlind
13:01 Re: HD file system? Nick Garnett
11:39 Re: [eCos v1.3.1/net] Old-style path convention results in Run Tests error Bart Veer
06:27 Re: [eCos v1.3.1/net] Old-style path convention results in Run Tests error Christopher Faylor
00:26 Re: Question about building reboot on RedHat 8.0 system usingecosconfig Jonathan Larmour
00:07 Re: MIPS32 gdb vectors question Mark Salter


Indexes: [Date Index] [Subject Index] [Author Index] [Thread Index]
Site Nav: [Browse other archives for this mailing list]
[Browse other mailing lists at this site]
Search: Limit to:

Mail converted by MHonArc 2.6.2