ecos-discuss archive
thread index for December, 2002
This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Messages are ordered newest-to-oldest in this index. The newest
threads will be at the top of this page, the oldest will be at the bottom.
Within a single thread, the first mail note is the START of the thread;
the notes following that are in the chronological order of when they
were received. So globally, newest messages are at the top, but within
a thread, the oldest (the start of the thread) is at the top.
If you think about it, it is confusing. Just go with the flow and
everything will be all right.
- m_clalloc(ncl, nowait),whether ncl will be too large to alloc?,
=?gb2312?B?1cUgwcE=?=
- appy nw yr,
Karthik Bala Guru
- fis load -d,
Patrick Doyle
- how cyg_mtocl(x) and cyg_cltom(x) work?,
=?gb2312?B?1cUgwcE=?=
- Set route to interface,
Roland Caßebohm
- How to remove the network part in red-boot?,
Roy Chung
- HAL for NS Geode SOC,
David Gathright
- download srec file to redboot problem,
Wang Anthony
- about jiffies!,
=?gb2312?q?gu=20xm?=
- RE: eCos port for Michochip PIC17C752.,
ramanabv
- /ecos-c mount under /ecos-c problem,
Wang Anthony
- microcontroller mailing lists,
Karthik Bala Guru
- eCos port for Michochip PIC17C752.,
ramraj
- Re: How can hole node come into being? -- As for truncate,
=?gb2312?q?gu=20xm?=
- How can hole node come into being? -- JFFS2,
=?gb2312?q?gu=20xm?=
- boot my pc with redboot and ...,
zhe zhang
- Boas Festas!..,
V&CD Informática e Serviços
- redboot build problem,
Wang Anthony
- help document in configtool,
max
- query,
Shaifullah MS
- Re:,
Gary Thomas
- use redboot for proprietary OS,
max
- problem about redboot,
zhe zhang
- RE: Problem with mbufs...,
Daniel Lidsten
- Target IO,
max
- insight: GUI does not come back,
max
- Debugging Updates to Redboot,
Rycerz Roman-G11565
- RE: Capacity problem?,
Daniel Lidsten
- Capacity problem?,
Daniel Lidsten
- Re: Re: Interrupt Handler Routine,
Lin Ming
- Interrupt Handler Routine,
Lin Ming
- RE: eCos 1.3.1 to eCos2 problems,
Schumacher, Gordon
- New ARM core port,
Patrick Doyle
- Axiom CMD561 (was - RE: MPC 555/565 Status),
Ian Gilmour
- Problem with mbufs...,
M.PREM KUMAR
Re: eCos & PowerPC 555, 565, 8xx, 82xx,
Robert M
what is the CONCEPTION of multi-cast Group?,
=?gb2312?B?1cUgwcE=?=
IGMP: multi-cast,
=?gb2312?B?1cUgwcE=?=
redboot problems,
narendra babu
[eCos] eCos compile&link problem 2,
howard
eCos compile&Link problem,
howard
RE: io/flash problem/question,
Jay Foster
io/flash problem/question,
Mark Salter
Redboot on Cirrus EP9312,
Adam Bezanson
RE: REAL meaning of little-endian and big-endian?,
Ashwani Mathur
where to join a tcp/ip FAQ mail list?,
=?gb2312?B?1cUgwcE=?=
build library (eCos configuration tool),
Howard
REAL meaning of little-endian and big-endian?,
=?gb2312?B?1cUgwcE=?=
free ATMEL 8051 c cross compilers - SDCC ..... any more ???,
Karthik Bala Guru
kernel image size - smallest linux kernel,
Karthik Bala Guru
Re: ECOS for Atmel AT91,
Karthik Bala Guru
ATMEL 8051 free c cross compilers,
Karthik Bala Guru
26 people made redundant - Can you help?,
Mike Casson
support for SNDS100,
#YEE FONG HUAT#
implement tcp/ip stack in memory cost-effcient embedded system!,
=?gb2312?B?1cUgwcE=?=
e2fs bug , e2fs_get_gdesc,
david
bug in e2fs code -> filetype information,
david
AT91 serial driver,
Jani Monoses
Redboot "reset" command on iq80321 eval board,
Rick Richardson
Re: Serial interrupts on the AEB,
Gareth .
Serial interrupts on the AEB,
Gareth .
Synthetic Linux Target App Startup Problem,
Joel Hansen
RE: CYGBLD_ATTRIB_NORET error,
Schumacher, Gordon
RE: Separate bss sections for kernel and application,
Ian Gilmour
Linux kernel and ramdisk,
RaviKanth
CYGBLD_ATTRIB_NORET error,
Schumacher, Gordon
HAL_DCACHE_xxx macros in mpc8xx HAL,
Christoph Csebits
RE: RE: General query on eCos and GNUPro Toolkit,
Qiang Huang
gethostname,
Bob Koninckx
where to buy arm development board?,
=?gb2312?B?1cUgwcE=?=
General query on eCos and GNUPro Toolkit,
engineers
Porting of ppp,
Shankar Rajendran
ipv6_server_test and getting/setting the IPv6 address,
darth vader
Re: ASSERT: cyg_callout_reset() We didn't pick the smallestdelta!,
Dan Jakubiec
RE: BlueZ with ecos?,
Lars Viklund
hal_if_init,
Brian McGinley
EL/IX and compatibility with Linux APIs,
Robert Vojta
Re: USB version is 1.10?!,
Sergei Organov
eb40a,
Christian Pellegrin
PDA REdboot - GDB file download,
Amit Tuljapurkar
RedBoot support,
Agarwal, Lomesh
How to get thread state info?,
Grant Edwards
BlueZ with ecos?,
harri.siirtola
ecos configure fails for ARM - I'm out of ideas please help,
Bahadir Balban
More eb40a redboot questions,
Shannon Holland
Re: Re: eCos version 2.0 is a GPL-compatible Free Software license,
Peter Vandenabeele
ok - it's getting better - now eb40a,
Shannon Holland
problems with building redboot for an eb40 target,
Shannon Holland
Breakpoints affecting eCos,
Magnus Ekhall
Help in running nc6test,
elvie hau
Error building Redboot for EP7312,
Backhaus Willy
RE: MPC 555/565 Status,
Ian Gilmour
RedBoot / eCos cvs repository snapshot ??,
olivier.duval
RHEPL, GPL and modification,
Robert Vojta
MPC 555/565 Status,
Henning Baldersheim
How should I interpret this macro? thanks a lot.,
Qiang Huang
ioctl failure with LANCEPCI,
Magnus Ekhall
redboot, eb40a and the cross-compiler,
Konstantin Kletschke
- Re: redboot, eb40a and the cross-compiler,
Andrew Lunn
- Re: redboot, eb40a and the cross-compiler,
Konstantin Kletschke
- Re: redboot, eb40a and the cross-compiler,
Gary Thomas
- Re: redboot, eb40a and the cross-compiler,
Konstantin Kletschke
- Re: redboot, eb40a and the cross-compiler,
Andrew Lunn
- Re: redboot, eb40a and the cross-compiler,
Andrew Lunn
- Re: redboot, eb40a and the cross-compiler,
Konstantin Kletschke
- Re: redboot, eb40a and the cross-compiler,
Gary Thomas
- Re: redboot, eb40a and the cross-compiler,
Konstantin Kletschke
- Re: redboot, eb40a and the cross-compiler,
Andrew Lunn
Re: SH4 Interrupt Handling,
Fernando RUIZ CASAS
SH4 Interrupt Handling,
Kiran C
cross development tools on linux,
max
redboot: down load file,
max
Redboot porting question?,
Qiang Huang
Separate bss sections for kernel and application,
Retallack, Mark (Poole)
Add ethernet device,
Magnus Ekhall
Re: Help in testing IPv6,
darth vader
Re: eCos for Ethernet Switches,
Andrew Lunn
eCos for Ethernet Switches,
Laith Said (DXD)
getting ip stack up,
A Makarov
thread support on powerpc simulator?,
Ian Gilmour
CYG_IO_GET_CONFIG_SERIAL_INPUT_FLUSH,
David Marqvar (DAM)
cq7750 flash patch,
Koichi Nagashima
Porting eCos onto Brecis MSP2000,
Mega_Lin
a few questions on eCos on PMC-Sierra MIPS,
Adam Kiepul
Re: ASSERT: cyg_callout_reset() We didn't pick the smallest delta!,
Kevin Hilman
Re: Adding M-CORE into supported platforms ?,
Gary Thomas
Lowest Prices on Aluminum Carrying, OEM Shipping & OEM LCD Monitor Cases,
Equipment Cases
ANNOUNCEMENT: New eCos Book is Available!,
Anthony Massa
SIGBUS error on SH4,
Kiran C
info on projects/products using ecos??,
Ian Gilmour
write own template for ecosconfig,
Tim Hölters
Re: about the consoles input and read from modem,
xiaoyan wang
GCC Cross-compilers for eCos: --enable-threads --enable-__cxa_atexit?,
Richard CHAN Shih-Ping
hal_zero_bss() question?,
Qiang Huang
Mail converted by MHonArc 2.5.13