This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Ethernet & serial problem
- From: Gary Thomas <gthomas at ecoscentric dot com>
- To: Daniel Lidsten <Daniel dot Lidsten at combitechsystems dot com>
- Cc: eCos Discussion <ecos-discuss at sources dot redhat dot com>
- Date: 17 Oct 2002 07:03:18 -0600
- Subject: Re: [ECOS] Ethernet & serial problem
- References: <004B1D7A5257174C9044A1B7BD0E60ED232C2C@ratatosk.combitechsystems.com>
On Thu, 2002-10-17 at 06:32, Daniel Lidsten wrote:
> Hi,
>
> When i enable the serial port (SMC1) on my MPC823 then ethernet (SCC2) stops working. I have looked for registers and pins that are the same but cant find any. Any ideas?
You might check to see if the ethernet code is somehow interfering
with the interrupts being used by the serial port (or vice versa).
We have certainly run such a combo here on the MPC860 (MBX board),
using SMC1 and SCC1 for ethernet.
--
------------------------------------------------------------
Gary Thomas |
eCosCentric, Ltd. |
+1 (970) 229-1963 | eCos & RedBoot experts
gthomas@ecoscentric.com |
http://www.ecoscentric.com/ |
------------------------------------------------------------
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss